RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 入手了trex 250 super combo [打印本頁]

作者: hkdavidlam 時間: 2010-4-23 22:50
標題: 入手了trex 250 super combo
本帖最後由 hkdavidlam 於 2010-4-23 22:52 編輯

終於忍唔住手...買了隻trex250 super combo來玩了
內有最新的gp780 gyro...good!!!

: 登錄/註冊後可看大圖

: 登錄/註冊後可看大圖

: 登錄/註冊後可看大圖

: 登錄/註冊後可看大圖

: 登錄/註冊後可看大圖

: 登錄/註冊後可看大圖

: 登錄/註冊後可看大圖

: 登錄/註冊後可看大圖

: 登錄/註冊後可看大圖

: 登錄/註冊後可看大圖

: 登錄/註冊後可看大圖

作者: albertau2011 時間: 2010-4-23 23:07
where do u play, C Hing

作者: cash 時間: 2010-4-23 23:54
c hing
how much!
Thank!

作者: hkdavidlam 時間: 2010-4-24 00:15
我會在將軍澳呀
這套買了hk$2630呀~~~{連align 11.1v 850mah 30c電}

作者: cheukkelvin 時間: 2010-4-24 01:27
恭喜!!恭喜!!

作者: supertenchung 時間: 2010-4-24 01:28
C hing, 是否再要加發射和接收？

作者: hkdavidlam 時間: 2010-4-24 16:02
回復 5# cheukkelvin

thanks!!!今晚開工~~~希望明天會整好~~~

作者: hkdavidlam 時間: 2010-4-24 16:03
回復 6# supertenchung

全中~~~要自備發射和接收

作者: albertau2011 時間: 2010-4-24 16:16
when do u play, i want to see see

作者: hkdavidlam 時間: 2010-4-25 01:41
終於攪掂~~~明天試飛~~~不過...係在家only!!

: 登錄/註冊後可看大圖

: 登錄/註冊後可看大圖

: 登錄/註冊後可看大圖

: 登錄/註冊後可看大圖

: 登錄/註冊後可看大圖

作者: hkdavidlam 時間: 2010-4-25 11:04
YEAH~~~試飛成功~~~部機都算幾定~~~
不過~~~gyro sen最多set 60%...only~~
如果唔係...會"hunt尾"

: 登錄/註冊後可看大圖

作者: supertenchung 時間: 2010-4-25 12:19
C hing, 請教隻機會不會室內太大，室外又太小？

作者: hkdavidlam 時間: 2010-4-25 13:05
本帖最後由 hkdavidlam 於 2010-4-25 13:10 編輯

回復 12# simonngkw

可以: trex 250se + walkera 2801pro + rx-2801e
reverse: ch1, ch4
trvadj: all 100%
swatts/swashmix: elev 30%, aile 30%, pit 50%
gyro sen: nor: 60%, idle: 30%
d/r: all 100%
exp: elev 50%, aile 50%. rudd 35%{因條尾太sensitive...so整埋rudd}
thrcurv:
nor: 0%, 40%, 60%, 77%, 86%
idle: 100%, 90%, 85%, 90%, 100%
pitcurv:
nor: 46.5%, 64%, 76%, 85%, 91%
idle: 16%, 35%, 53%, 72%, 91%

作者: hkdavidlam 時間: 2010-4-25 13:08
回復 13# supertenchung

我自己覺得trex250 只係室內機~~~太大風跟本控唔到~~~
要玩室外~~~起碼要trex450

作者: supertenchung 時間: 2010-4-25 14:36
c hing, 如果加埋 walkera 2801pro + rx-2801e， 4千得唔的？

作者: hkdavidlam 時間: 2010-4-25 14:51
本帖最後由 hkdavidlam 於 2010-4-26 02:05 編輯

回復 16# supertenchung

一定得呀!
trex 250 se super combo: $2630
walkera 2801 pro + rx2801e: $13xx到 {淘寶網好似仲平...under $1000}

不過~~~如你無450機~~~好似trex 450 sport super combo抵玩d <--- $2690到 {不連電}

作者: albertau2011 時間: 2010-4-25 15:26
C Hing,
what is diff trex 250 se super combo and trex 250 super combo

作者: hhxhkuroro 時間: 2010-4-25 18:03
ching can u tell me setting for 450? for 2801 pro
i have a 450 copterx v2 kit not very good on setting the transmitter. can u tell me your setting for 450

作者: gary213 時間: 2010-4-25 18:11
450Sport+250se!!!
恭喜!!恭喜!!

作者: supertenchung 時間: 2010-4-25 20:24
c hing, i am only a beginner, "不過~~~如你無450機~~~好似trex 450 sport super combo抵玩d <--- $2670到 {不連電}: why 450 should be bigger than 250, but why the price is more or less the same lei?

作者: goflygo 時間: 2010-4-25 22:09
nice heli, I saw someone fly outdoor and still pretty stable. I also want to have one in the coming winter but will buy a clone (align is way too expensive for me)

作者: hkdavidlam 時間: 2010-4-26 00:23
回復 18# albertau2011

你去align個網頁到有講250 se 同 250有咩改進
不過~~~現在好似得返新d的 trex 250se版only!

作者: hkdavidlam 時間: 2010-4-26 00:30
本帖最後由 hkdavidlam 於 2010-4-26 01:22 編輯

回復 20# hhxhkuroro

可以: trex 450 sport + walkera 2801pro + rx-2801e
reverse: ch6
trvadj: all 100%
swatts/swashmix: elev 35%, aile 35%, pit 65%
gyro sen: nor: 70%, idle: 30%
d/r: all 100%
exp: elev 50%, aile 50%. rudd lin
thrcurv:
nor: 0%, 42.5%, 68.5%, 86.5%, 100%
idle: 100%, 90%, 85%, 90%, 100%
pitcurv:
nor: 49.5%, 64%, 74.5%, 82.5%, 90.5%
idle: 18.5%, 34%, 50.5%, 71%, 90.5%

作者: hkdavidlam 時間: 2010-4-26 00:31
回復 21# gary213

Thanks YOU...多多指教

作者: hkdavidlam 時間: 2010-4-26 00:36
回復 22# supertenchung

這條問題我都問過d鋪頭

佢地話450 同 250的super combo的"電子零件"係差唔多價錢喎~~~

作者: hkdavidlam 時間: 2010-4-26 02:45
回復 23# goflygo

老實講~~~買部clone機 + 自備 esc + motor + 3 x servo + gyro + 尾servo的價錢
可能同買部trex 250 se super combo差唔多...(不過...就多了選零件的好處)

以下係我對super combo的電子零件的睇法:
ESC: RCE-BL15x: 不過不失
MOTOR: RCM-BLS250sp: 都算ok
GYRO: GP780 + DS420: 幾好
SERVO: DS410 x 3: 幾差

作者: hhxhkuroro 時間: 2010-4-26 14:44
回復 25# hkdavidlam

thank you very much let me try later... i once fly once but too scary iam first time play heli but i have 4G6.... and 4G3.... planning to change to lama.....

作者: hkdavidlam 時間: 2010-4-26 18:46
回復 29# hhxhkuroro

如果你玩得掂4g3...世上應該無咩機會難到你~~~努力!!

作者: goflygo 時間: 2010-4-28 22:45
本帖最後由 goflygo 於 2010-4-28 22:51 編輯

回復 28# hkdavidlam

Thx for the info, my cost of a clone is around HK$900 (incl. shipping), including:
HK-250GT kit (all alloy, G/F frame+blade)
20A ESC
Motor 2627 (4500kv)
servo 9g x4
gyro 401B
This is good for my sport flying style (no 3D and never)and suit my bill .
I know its always nice to hv align brand when $$$ can spare for it.
Hv to save $$ for my airplane fleet too

P.S. yeah, I hv to change the spindle shaft and the belt with Align parts that would add some cost.

作者: hkdavidlam 時間: 2010-4-29 07:17
回復 31# goflygo

你部機的spec.都唔錯喎...very good
祝你快d整好部機

作者: britishsh36 時間: 2010-5-6 18:52
有d心思思想買添................

作者: goflygo 時間: 2010-5-6 21:42
回復 32# hkdavidlam

Hi David,
Thanks, but this clone still on my wish list ,not bought yet (almost click on the buy button). I'm busy in flying my new Alpha Jet EDF and Xcopter 450 for the moment.

So hows your flymenter work? More testing lately?

作者: hkdavidlam 時間: 2010-5-6 23:24
回復 34# goflygo

HAHA~~~個flymentor真係幾work的(balanced mode)...真的可以離手唔控部機
我install在compy 300細細機...都無問題{我諗install落250都得}
遲d...我會買部平少少的450...再試下這個flymentor

註: 但佢"定點hovering"就唔太work!

作者: hkdavidlam 時間: 2010-5-12 14:58
回復 37# simonngkw

唔緊要...有咩唔明
大家分享下

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)