RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區
標題: SAMIX RC Flexible chassis conversion kit for Tamiya 418 [打印本頁]
作者: X-RC 時間: 2014-4-6 18:42
標題: SAMIX RC Flexible chassis conversion kit for Tamiya 418
本帖最後由 X-RC 於 2014-4-7 13:37 編輯
Samix TRF418 conversion kit Feature:
1. 82MM super narrow chassis
2. High quality CarbonFiber Material Matte finishing
3. 7075 Aluminum floating motor mount with 5MM shaft and bearing
4. Adustable Aluminum battery guard included
5. Upper Deck with matte finishing included
6 . Aluminum steering upper stiffener
Samix TRF418 conversion kit Function:
1. Less chassis scrub when rotating through corners
2. Thus increasing corner speed, this chassis can direct fit standard Tamiya chassis motor mount
3. Max Flex traits
4. Increased overall traction
5. Reduce scratchs on the chassis
This SAMIX TRF 418 Conversion kit will available in Next week in KWS Model Shop
-
-
作者: blackshark3 時間: 2014-4-6 19:48
The million dollar question: how much
作者: X-RC 時間: 2014-4-6 20:08
YOU CAN CHECK IT ON NEXT WEEK IN KWS ...
作者: blackshark3 時間: 2014-4-6 20:31
Then which shop in KWS available? Action?
作者: X-RC 時間: 2014-4-6 21:36
YES~! ACTION HOBBY
作者: blackshark3 時間: 2014-4-7 00:19
Then I will wait...about which date next week? Would get one set if the price is not excessive. The original is already quite good, so if price too much would rather save the money and hassles to change chassis while wait for the new version 418 cause judging from the half a year lifespan of the usual TRF TC range a new version is going to come mid of the year anyway
作者: X-RC 時間: 2014-4-7 00:34
I think you change this chassis is better than you wait for the tamiya new car , This chassis can impove you 418 better of the handling, We also test many times,I think you will like this chassis. thank you!
作者: blackshark3 時間: 2014-4-7 03:22
I like the current 418 handling very much already, and this is just icing on the cake...I have the BD7-14 which the motor mount of this set is "referenced" upon and I don't like its handling anyway...Let's see the price then...
作者: Evo5 時間: 2014-4-7 11:19
what is this mean ?
5. Prevent scratchs on the chassis ?????
作者: a_do 時間: 2014-4-7 12:47
$$200usd price ?????
作者: X-RC 時間: 2014-4-7 13:00
因為SAMIX呢塊板既闊度比原廠窄了4mm,甴原來的86mm减至82mm,這樣可以減少過彎時底板兩邊與地下的按觸,而這句英文的意思確是令人有點難以理解,我們將會修改一下,謝謝提醒
作者: blackshark3 時間: 2014-4-7 18:06
If that's the case, good luck!
作者: wellhope 時間: 2014-4-8 08:34
Is it fit for 417x or just for 418?
作者: X-RC 時間: 2014-4-8 12:50
just for 418 ,thank you!
作者: BT 時間: 2014-4-9 19:54
如果可比417改就正。
作者: X-RC 時間: 2014-4-9 20:28
有諗過,但D位差太遠
作者: X-RC 時間: 2014-4-18 10:13
This conversion kit already available in ACTION HOBBY
作者: blackshark3 時間: 2014-4-18 14:51
Again the million dollar question is how much
作者: shwwan 時間: 2014-4-22 01:27
418 搶都冇貨,無缘
作者: blackshark3 時間: 2014-4-22 19:35
今日去食足問,賣晒,再問價錢,一係好小貨,一係我唔識貨,但點都好,祝出嗰間好運
作者: revee561 時間: 2014-4-22 19:39
甘代表好貴,而不太好
作者: X-RC 時間: 2014-4-23 14:11
只因銷量比預期好,未能即時供應到經銷商,新貨將於今週內再次出貨,不便之處,請見諒!
作者: georgej 時間: 2014-4-24 01:03
套kit做工不錯,一樣動力和懸掛設定,比完裝底板出灣可更早起油,另購的40mm風扇坐精美,如可做回藍色更好
歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/) |
Powered by Discuz! X3.2 |