今日郁手架F201小小問題

to Gaary Bro.

A1: i have no problem with that. But you can reset the neutral of the servo
A2: Tamiya's fast gear 23/52........with Tamiya Alu Mount......i have no problem.
A3: you have to install the fount and rear gearboxs first, then put the mid gear with the 中軸s (F/R) at the same time

to markpo

who are you asking?

原帖由 gary 於 2006-6-4 10:54 PM 發表
1.)但轉向時個波箱會郁
2.)即係要買原裝hop up啦.
3.)是要好用力推佢入去,找番出黎都一樣~~

any photos?

2.)即係要買原裝hop up啦.(YOU SHOULD BE...............HAHA......another $60??)

原帖由 gary 於 2006-6-4 11:00 PM 發表

明天先啦,但3 racing摩打mount成個樣同tamiya一樣,但可以摩打齒點唔到大減齒??
你架又攪成點呀??

i throw the 23 motor gear, use 24...........very tight, i like tight.......

Remind.......better use screw gel with the Alu motor mount

my car finished....rctpp asked to use BLACK SKIN PIG, so i used the orginal motor

原帖由 gary 於 2006-6-4 11:02 PM 發表

你想要3racing alum mount mount同中軸??

Gary, sell tham to him la

you can buy all Tamiya F201 Hop up at WaiXX, including the mount and 中軸

原帖由 gary 於 2006-6-4 11:12 PM 發表

人地都無話要,多事,我宜家用番個膠mount mount,個3racing試左好多次都唔得....

God Bless YOU.

原帖由 gary 於 2006-6-4 11:14 PM 發表

我都係用 Black Pig,post張相黎睇睇...

ok....as soon as possible

原帖由 gary 於 2006-6-4 11:20 PM 發表
咁裝柱香先..ha..ha...
個用黑豬個感覺幾快咁,試左車未??

test drive already

Acc too slow, but top speed is alright, with 4200 battery can play long

one expert told me to take out the clear stabilzer in the front can have better turn, but i didn't

原帖由 gary 於 2006-6-4 11:32 PM 發表
clear stabilzer??乜黎架??

Front arm 下,