Gen-X 10 Pro Graphite Kit (World GT)

I CANT FIND IT IN KWS

JUST ORDER FORM US
1 x 1710 - Gen-X 10 Pro Graphite Kit (World GT)
1 x World GT Spec Tire - Front
1 x World GT Spec Tire - Rear
2 x Sophia GT 200mm World GT Body

ANY BOTHER KNOW CAN I USE 3.5MOTOR?
AND WHITCH SERVO GOOD FOR THIS CAR....

thx bother that think i bought it too..thx...
so u say only can use 12son servo....means i only can use 9650?
cant use 9551? or any good servo i can use?
so what motor  is good for this car....
i got ko esc
3.5t/9t/17.5t/

HAHA!~THXS I WILL BEWARE ABOUT THE SCREW!~
EVEN 9650 WILL TOO BIG......

原帖由 henryb4sun 於 2009-3-22 21:36 發表

                               
登錄/註冊後可看大圖

And EDI, where you order your kit from? US Website directly? Can you share?

OK... I ORDER FROM http://www.nexusracing.com/index.php AND http://www.teamcrc.com/crc/index.php
BUT NEXUSRACING IS CHEAPER THAN CRC,,,BUT CRC HAVE ALL STOCK,,,I JUST BOUGHT 2SET GT TIRES FORM CRC...
I WILL PUT 3.5MOTOR TOO..BUT WHAT PINION GEAR U USE?

AND WHAT IS THE DIFFERENT ABOUT 1/10 TOURING AND 1/10 WORLD GT?

and....one more thing...u guys use 4cell or 5cell? or lipo?

No sure for servo, at least I tried to mount a 9650, but it is too big.  THen I mount a very aged 12 sone servo, it is OK.  So, just mount and use it.
FOr motor, what I tried so far is SP 's 11.5.  a ...
benz1850 發表於 2009-3-22 16:27

                               
登錄/註冊後可看大圖

hey bother BENZ1850!~ i just go kws today...they say the car can use even9551 servo woo....not use 1/12 servo woo

no cat a~! i only go x全 ...they say use standard size woo...i still waiting my car....

heee!~ no time today..will do it tomorrow night

haha!~  thxq bother benz .. i will be careful about the petty screw
i will use top toy  and 9650 9.5t first....
later trytry ko esc ko949 3.5.....
but i ask x全..they say dont use 3.5

wa~!你地一以再咁提醒我!~我真係好驚woo
玩起上黎有冇問題gar

just assembly to servo mont....byt how come no sdervo saver gar i try to use xway 1/12 servo saver,,,but too short......
and the red screw is really really really fucxxxg soft....how come like that:funk:i think i will buy some tamiya screw...i got so many red screw fucx up...

okok bother benzi will go cat  shop today see see thx!~

今次第一次砌crc. 少少失望..比起xway(12)砌起上黎樣樣就住就往差D差D麻鬼煩煩......,
人地xway砌起上黎樣樣簡單清楚...,
不過呢我係(樓)D紅色SCREW姐...等我今日去揾D藍色TRD SCREW攪攪先,
仲有,BALL LINK膠頭又(媽)吓先..D膠薄到死...不過好似喺美製車特點 ,
希望砌起會過引D啦

終於叫做砌好!~真係好紅
現發現兩問題
車尾唔知點解側埋一邊,,攪極到攪唔好.仲攪到有粒screw超滑牙
servo已裝好,但servo好有怪聲...(頂servo的聲音)

滑牙有乜辦法呢

我都唔係幾明..Y粒BALL頭唔ARM位又太"林"
我張隻SERVO放咁高係因為想兩條BALL LINK平行D冇咁多阻力
但我从家隻SERVO重有小小怪聲

Brother EDI and Henry;

Share my X10 first.

My streering rod is same length and size.  And the length enough for me to set toe out/in.
EDI, my servo also have tricky sound, but I just ignore it. ...
benz1850 發表於 2009-4-3 01:20

                               
登錄/註冊後可看大圖

HAHA BOTHER BENZ!~ 粒滑牙拎番出黎LA..淨係要買番粒SCREW,..