.21 TOP ENGINE base setting

Hello everyone,
I am trying to find the base settings for a .21 TOP engine that I have.
I have bought it back in 1992 and have since lost all the manual.

I was able to start it again just now (first time since 93) and got it idle but couldn't do anything else. It would go crazy if I open the throttle . Want to get an idea what settings to start.

Big Thanks!!

                               
登錄/註冊後可看大圖

Idle screw

                               
登錄/註冊後可看大圖

Low Speed

                               
登錄/註冊後可看大圖

Mid and high range.

                               
登錄/註冊後可看大圖

Thank you for that link!! Great reply that you had there.
Should be on a FAQ!

Thanks!

Sirio 發表於 2010-3-23 09:34

                               
登錄/註冊後可看大圖

Hi Sirio!

I assume this is the same for my TOP engine's carb, right?

Thanks.

"9.如使用推拉式化油器的，大部份都有第三組油針(濕度油針)，把第三油針(濕度油針)調教至外表面與化油器表面大致齊平的位置及指向12點位置。這個油針的作用是在空氣濕度有變化情況下的微調油針，這組油針不能調教超過1/2轉的！"