火咀蝕死佐係引擎頂蓋入面點樣擰得翻出來?

請問各位ching, 火咀蝕死佐係引擎頂蓋入面點樣擰得翻出來? 小弟用火咀匙好大力都擰唔出來. thx

方法都係大力擰佢出黎，支批一定要夠硬扶手加長借力擰出黎！

take the 引擎頂 out first, try to spray a bit WD40 for lube, use something to knock it gently, and then try to screw it out. apply the force lightly and slowly first and then increase the power to take it out

take the 引擎頂 入厨房燒燒佢

thx以上師兄，問兩個問題
1·加長扶手用乜野加長呢？
2·knock it gently 噶時候點樣固定個引擎頂呢？
THX

Another method of removing a seized glow plug involves heat. Glow plug and cylinder head are made from two different materials, aluminum and metal. A gas torch may suffice as the parent part; the cylinder head is not too heavy. You need to heat the part around the cylinder head. Heat will expand the cylinder head to encourage it to loosen its grip on the glow plug. Then unscrew the glow plug with the wrench immediately before the part has a chance to cool down.

thx以上師兄，問兩個問題
1·加長扶手用乜野加長呢？
2·knock it gently 噶時候點樣固定個引擎頂呢？
T ...
EricRC 發表於 2010-4-1 09:29

                               
登錄/註冊後可看大圖

   1·加長扶手用乜野加長呢？ = "鐵通" For example.... 單車座位條"鐵通"
   2.knock it gently 噶時候點樣固定個引擎頂呢？ = 記得包布

用長卜頭鬆

我試過擰到支批都爆開埋

其實火咀唔駛擰到咁緊,擰到覺得緊就可以了.

如果眞係擰唔返出離,建議你把成個散熱頂連火咀一齊更換.

感覺上個散熱頂好貴,可能因為佔引擎面積最大

感覺上個散熱頂好貴,可能因為佔引擎面積最大
ThomasZ 發表於 2010-6-26 20:18

                               
登錄/註冊後可看大圖

部engine裝上車先, 好借力d.....用十字火咀匙加塊布墊住擰,大部份情況都出倒黎喎...

用支好少少o既十字火咀匙, 好似eds, hudy果d......平野我都試過...真係會爆開的

個火咀唔會實到咁呀? 係o既話上果時盤頂都掃牙啦...

如果實到咁....個盤頂都會逼住c筒...好難拆.

部engine裝上車先, 好借力d.....用十字火咀匙加塊布墊住擰,大部份情況都出倒黎喎...

用支好少少o既十 ...
stanley_wwy 發表於 2010-6-26 23:47

                               
登錄/註冊後可看大圖

係呀 所以我無眼睇成架車成咗俾朋友,那台novarossi好似要成二千蚊的, 2000年的事了
近排心癢玩番電車,但都係懷念架v-one-r既引擎聲,訂咗架ten-t,應該係玩具級既油車,希望handle得到

回復 13# ThomasZ


    咁重本 $2000
我當年都係用千鬆 D nova

可惜我當年以玩撻車為主,撻車多過行車,撻車撻到個撻箱個膠輪都甩哂皮
自此便有陰影了

回復 15# ThomasZ


    當年跟朋友玩，較計唔成問題，佢地攪掂哂

好幸褔啊! 我同事當年同我一齊買車之後一次都未同過我出去玩
當年又無咁多網上資料搵呢,而家真方便
chacha哥而家你玩咩車呢?