RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 5073|回復: 7
收起左側

Axial SCX10

[複製鏈接]
hobbyhobby 發表於 2012-4-18 16:19:39 | 顯示全部樓層 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
Axial  SCX10
 樓主| hobbyhobby 發表於 2012-4-19 03:32:48 | 顯示全部樓層
本帖最後由 hobbyhobby 於 2012-4-19 03:33 編輯

parts for Axial SCX10 Scale Truck
SCP2101

                               
登錄/註冊後可看大圖

Black Alum Steering Knuckle Scorpion
These are optional CNC-machined aluminum front knuckle arms for the AX10 Scorpion
FEATURES:
CNC-milled 6061 aluminum construction. Anodized Black with CNC engraved silver lining
INCLUDES:
Two front knuckle arms. Four Green Screw Cap
REQUIREMENTS:
Assembly on vehicle.
SPECIFICATIONS:
length: 38.44 mm height: 31.36 mm
COMMENTS:
These are an upgrade for AX10
This part is available for sale or distribution


 樓主| hobbyhobby 發表於 2012-4-19 03:34:16 | 顯示全部樓層
本帖最後由 hobbyhobby 於 2012-4-19 03:34 編輯

parts for Axial SCX10 Scale Truck
SCP1901

                               
登錄/註冊後可看大圖

Black Alum. C-Hub Scorpion
This is an Aluminum c-hub Carrier for the AX10
FEATURES:
CNC 6061-T6 aluminum construction. Anodized Black with CNC engraved silver lining
INCLUDES:
Two Aluminum c-hub carriers. Four Aluminum Countersunk Washer Four 3x8mm Flat head screw
REQUIREMENTS:
Assembly on vehicle.
SPECIFICATIONS:
length: 24.25mm width: 19.57 height: 23.81mm
This part is available for sale or distribution

 樓主| hobbyhobby 發表於 2012-4-19 03:35:15 | 顯示全部樓層
本帖最後由 hobbyhobby 於 2012-4-19 03:35 編輯

parts for Axial SCX10 Scale Truck
SCP3801

                               
登錄/註冊後可看大圖


6061 Alum. center gear box AX10
This is the optional CNC 6061 Aluminun Center Transmission Case for the Ax10
FEATURES:
CNC 6061-T6 Aluminum construction, Anodized Black with CNC engraved silver lining Direct fit hop up requires no model modification for use
YOU WILL RECEIVE:
One Aluminum Center Gear Box
REQUIREMENTS:
Installation
This part is available for sale or distribution


 樓主| hobbyhobby 發表於 2012-4-19 03:36:06 | 顯示全部樓層
本帖最後由 hobbyhobby 於 2012-4-19 03:36 編輯

parts for Axial SCX10 Scale Truck
SSCP1000T

                               
登錄/註冊後可看大圖


Hard Steel Center Gear set AX10
This is a steel internal gear set for the AX10.
FEATURES:
CNC steel gears hardened to increased wear resistance and improved fatigue life. Replaces stock nylon gear
YOU WILL RECEIVE:
All three Gear
REQUIREMENTS:
Removing stock nylon gear
COMMENTS:
Best Use a Silicone Lube
This part is available for sale or distribution


 樓主| hobbyhobby 發表於 2012-4-19 03:37:17 | 顯示全部樓層
本帖最後由 hobbyhobby 於 2012-4-19 03:37 編輯

parts for Axial SCX10 Scale Truck
TRE330SA08

                               
登錄/註冊後可看大圖

stainless Steel Angle Tie Rod end
These are optional Hot Racing stainless Steel Angle (Rod Ends


FEATURES:
Silver in Color
stainless Steel Construction


YOU WILL RECEIVE:
(2) Rod Ends

REQUIREMENTS:
Installation

SPECIFICATIONS:
length: 12mm
diameter: 5mm



CNC Machined stainless Steel construction Preinstalled with a chrome steel ball with a 3mm hole
Fit 3mm threaded shaft
This part is available for sale or distribution


batcat 發表於 2012-4-21 08:43:23 | 顯示全部樓層
hobbyhobby 發表於 2012-4-19 03:34
parts for Axial SCX10 Scale Truck
SCP1901

請問那裏有售?
 樓主| hobbyhobby 發表於 2012-4-22 01:19:59 | 顯示全部樓層
TO REQUEST :
HOBBY HOBBY
TEL 23328444
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-3-28 21:21 , Processed in 0.096660 second(s), 15 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表