bought MB4 already

Hi brothers, I bought a 2nd hand MB4 yesterday. Got tons of spare parts - include a pair of atomic metal CVD
But the front A arm seems wear so much and need to replaced　－　but no space A arm provided . Can I change to the better design MB4 truggy front upper and lower arm without any modification ?
The steering seems not so smooth. ..... ..  If I use a 3003 servo, it seems that i need to cut the "ear" of the servo, am i correct on this ?
What ESC would suitable ? I thinking about V16 . - ( maybe 2nd hand as well ）Hope to join your party of MB4 soon.

Brother don't forget to share the photos ar.....

I'm also using 3003 servo( need to cut Both Ears  if not the mini servo ), I'm using MC330CR ESC because I think Forward & Reverse included is necessary for off-road.

But the Length of arms between Buggy and Truggy is the same size. Truggy is longer.

原帖由 raymen 於 2007-9-2 20:17 發表

                               
登錄/註冊後可看大圖

Brother don't forget to share the photos ar.....

I'm also using 3003 servo( need to cut Both Ears  if not the mini servo ), I'm using MC330CR ESC because I think Forward & Reverse included is  ...

thanks raymen ! Maybe I need to go waigo again for the "A" arms. Will post the photo soon
I think you got it right to have forward and reverse ESC !

bought back the front arm already. . but no original wheel adaptor available. - my MB4 come with the kyosho 1/18 wheel which use smaller size hexagaon adaptor. . so at the moment i cannot use the 1/10 wheels.

a picture to share , still need a ESC to test the speed

PICTURE WITH  MINI T

原帖由 rk2 於 2007-9-2 07:36 PM 發表

                               
登錄/註冊後可看大圖

Hi brothers, I bought a 2nd hand MB4 yesterday. Got tons of spare parts - include a pair of atomic metal CVD
But the front A arm seems wear so much and need to replaced　－　but no space A ...

Brother, How much is the pair of Metal CVD of the MB4 Truggy/??? stock available in Waigo now?  Thks

原帖由 raymen 於 2007-9-12 12:49 發表

                               
登錄/註冊後可看大圖

Brother, How much is the pair of Metal CVD of the MB4 Truggy/??? stock available in Waigo now?  Thks

I have an impression of $16x ~ 18x for original Anderson MB4 parts - not sure suitable for truggy or not. Yes,it is available in Waigo. Maybe you can also check here http://www.rcmart.com/catalog/default.php?cPath=144_1036, location in Kwun tong. service is rather good. price will be abit cheaper if you go to their office to pick up.

原帖由 rk2 於 2007-9-12 01:18 PM 發表

                               
登錄/註冊後可看大圖

I have an impression of $16x ~ 18x for original Anderson MB4 parts - not sure suitable for truggy or not. Yes,it is available in Waigo. Maybe you can also check here http://www.rcmart.com/catal ...

yes...the service is good... I'm always brought stuffs and parts there...
Only the location is not fit for me..

ESC is back

but the T- plug is so tight. difficult to un plug everytime.   May change to other plug soon.