RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 今日郁手架F201小小問題 [打印本頁]

作者: gary 時間: 2006-6-4 22:27
標題: 今日郁手架F201小小問題
1.)前面servo推轉向支推杆頂到個波箱,你地會唔會,有乜解決辦法?
2.)買左3racing Alum motor mount唔岩用,我換左快齒,你地會唔會??
3.)原裝中軸好鬼重,所以我換了3racing,但安裝有難度,你地有無發生??

作者: gibson 時間: 2006-6-4 22:30
question 1, I do not this problem.
Question 2, The gear set consists of two gear, you should change the motor gear and the spur gear as well.

作者: gary 時間: 2006-6-4 22:33
咁你有無用3racing alum motor mount?

作者: Mobility 時間: 2006-6-4 22:38
to Gaary Bro.

A1: i have no problem with that. But you can reset the neutral of the servo
A2: Tamiya's fast gear 23/52........with Tamiya Alu Mount......i have no problem.
A3: you have to install the fount and rear gearboxs first, then put the mid gear with the 中軸s (F/R) at the same time

作者: markpo 時間: 2006-6-4 22:44
1. 開頭我都以為有頂住,但裝完就無呢個情況發生wor~
2.~ 華~ 你邊度買ga? 我搵左好耐ar??
3. 我都想搵ar, tell me where u buy~

thx thx~

作者: Mobility 時間: 2006-6-4 22:48
to markpo

who are you asking?

作者: orange00 時間: 2006-6-4 22:53

原帖由 gary 於 2006-6-4 22:27 發表
1.)前面servo推轉向支推杆頂到個波箱,你地會唔會,有乜解決辦法?
2.)買左3racing Alum motor mount唔岩用,我換左快齒,你地會唔會??
3.)原裝中軸好鬼重,所以我換了3racing,但安裝有難度,你地有無發生??

1)我估你用咗反牙.
2)我用星星, 無問題
3)擺好支軸先拍隻杯入去.

作者: gary 時間: 2006-6-4 22:54
1.)但轉向時個波箱會郁
2.)即係要買原裝hop up啦.
3.)是要好用力推佢入去,找番出黎都一樣~~

作者: gary 時間: 2006-6-4 22:55

原帖由 orange00 於 2006-6-4 22:53 發表

1)我估你用咗反牙.
2)我用星星, 無問題
3)擺好支軸先拍隻杯入去.

1.)原裝無反牙
3.)你有無用緊??

作者: Mobility 時間: 2006-6-4 22:58

原帖由 gary 於 2006-6-4 10:54 PM 發表
1.)但轉向時個波箱會郁
2.)即係要買原裝hop up啦.
3.)是要好用力推佢入去,找番出黎都一樣~~

any photos?

2.)即係要買原裝hop up啦.(YOU SHOULD BE...............HAHA......another $60??)

作者: gary 時間: 2006-6-4 23:00

原帖由 Mobility 於 2006-6-4 22:58 發表

any photos?

2.)即係要買原裝hop up啦.(YOU SHOULD BE...............HAHA......another $60??)

明天先啦,但3 racing摩打mount成個樣同tamiya一樣,但可以摩打齒點唔到大減齒??
你架又攪成點呀??

作者: markpo 時間: 2006-6-4 23:01
我問緊 gary lor~
但我都係用反牙wor~ 都無呢個問題出黎~

作者: gary 時間: 2006-6-4 23:02

原帖由 markpo 於 2006-6-4 23:01 發表
我問緊 gary lor~
但我都係用反牙wor~ 都無呢個問題出黎~

你想要3racing alum mount mount同中軸??

作者: Mobility 時間: 2006-6-4 23:06

原帖由 gary 於 2006-6-4 11:00 PM 發表

明天先啦,但3 racing摩打mount成個樣同tamiya一樣,但可以摩打齒點唔到大減齒??
你架又攪成點呀??

i throw the 23 motor gear, use 24...........very tight, i like tight.......

Remind.......better use screw gel with the Alu motor mount

my car finished....rctpp asked to use BLACK SKIN PIG, so i used the orginal motor

作者: Mobility 時間: 2006-6-4 23:08

原帖由 gary 於 2006-6-4 11:02 PM 發表

你想要3racing alum mount mount同中軸??

Gary, sell tham to him la

you can buy all Tamiya F201 Hop up at WaiXX, including the mount and 中軸

作者: gary 時間: 2006-6-4 23:12

原帖由 Mobility 於 2006-6-4 23:08 發表

Gary, sell tham to him la

you can buy all Tamiya F201 Hop up at WaiXX, including the mount and 中軸

人地都無話要,多事,我宜家用番個膠mount mount,個3racing試左好多次都唔得....

作者: gary 時間: 2006-6-4 23:14

原帖由 Mobility 於 2006-6-4 23:06 發表

i throw the 23 motor gear, use 24...........very tight, i like tight.......

Remind.......better use screw gel with the Alu motor mount

my car finished....rctpp asked to use BLACK SKIN PIG ...

我都係用 Black Pig,post張相黎睇睇...

作者: Mobility 時間: 2006-6-4 23:16

原帖由 gary 於 2006-6-4 11:12 PM 發表

人地都無話要,多事,我宜家用番個膠mount mount,個3racing試左好多次都唔得....

God Bless YOU.

作者: Mobility 時間: 2006-6-4 23:19

原帖由 gary 於 2006-6-4 11:14 PM 發表

我都係用 Black Pig,post張相黎睇睇...

ok....as soon as possible

作者: gary 時間: 2006-6-4 23:20

原帖由 Mobility 於 2006-6-4 23:16 發表

God Bless YOU.

咁裝柱香先..ha..ha...
個用黑豬個感覺幾快咁,試左車未??

作者: gary 時間: 2006-6-4 23:21

原帖由 Mobility 於 2006-6-4 23:19 發表

ok....as soon as possible

fast..

作者: Mobility 時間: 2006-6-4 23:27

原帖由 gary 於 2006-6-4 11:20 PM 發表
咁裝柱香先..ha..ha...
個用黑豬個感覺幾快咁,試左車未??

test drive already

Acc too slow, but top speed is alright, with 4200 battery can play long

one expert told me to take out the clear stabilzer in the front can have better turn, but i didn't

作者: gary 時間: 2006-6-4 23:32
clear stabilzer??乜黎架??

作者: Mobility 時間: 2006-6-4 23:38

原帖由 gary 於 2006-6-4 11:32 PM 發表
clear stabilzer??乜黎架??

Front arm 下,

作者: gary 時間: 2006-6-4 23:50

原帖由 Mobility 於 2006-6-4 23:38 發表

Front arm 下,

強化個隻~~

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)