RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: AYK RS401i.... [打印本頁]

作者: batcat    時間: 2009-7-11 00:02
標題: AYK RS401i....
本帖最後由 batcat 於 2009-7-11 00:07 編輯

I saw my 1st RC...in JP!  AYK RS401i   I miss her.  

http://member.hot-cha.tv/~htc03813/html/cyclone.html
作者: batcat    時間: 2009-7-11 00:07
Another link about this car....
http://blog.roodo.com/tamiyaclub/archives/3695645.html


                               
登錄/註冊後可看大圖

作者: chacha    時間: 2009-7-11 01:45
呢部 AYK 我都玩過,換摩打好麻煩,纖維板比較薄。
作者: tiger1    時間: 2009-7-11 11:24
c-hing, how did this car handle?
作者: batcat    時間: 2009-7-13 02:00
Handling is so far so good but a little bit heavy at that age!  I think it is better than many 1:10.  At that moment, the main reason why I choose it is the desgin, it is art display.  I 100% agree with "chacha" C-hing said, it was very diff to change the motor!
作者: Lotus    時間: 2009-7-13 12:57
nice car
作者: camlchris    時間: 2009-7-15 16:02
這部 AYK 是 copy 1/8 DELTA EAGLE.
[attach]280136[/attach]
作者: dennis2008    時間: 2009-7-17 12:04
師兄:呢部 AYK 我都玩過,還有小部份殘餘物在家,牙差,麼打座,前頭部份,好似有個未用過的機變......等等
作者: chacha    時間: 2009-7-17 13:39
師兄:呢部 AYK 我都玩過,還有小部份殘餘物在家,牙差,麼打座,前頭部份,好似有個未用過的機變......等等
dennis2008 發表於 17/7/2009 12:04

呢架都有20年歷史,重收埋係度
作者: dennis2008    時間: 2009-7-17 14:27
搬了幾次屋只有幾個老伴一直在身邊YZ834B,AYK,FUTABA的方型有呔遙控等等...還有一部好似係亞稣士12仔,但不懂POST相片及師兄睇。
作者: chacha    時間: 2009-7-17 17:31
試下 post 上黎比大家睇
作者: bigbigboy    時間: 2009-7-21 12:03
本帖最後由 bigbigboy 於 2009-7-21 12:05 編輯

Any Ching can advise if I can find the spare chassis
作者: dennis2008    時間: 2009-7-21 15:01
嘩....師兄:我的床下底AYK跟你差不多.....但比你散得多....完裝四支油壓己切唔到....牙差還可以....
作者: bigbigboy    時間: 2009-7-21 15:13
My one has broken the upper and lower decks, front dampers (both side).
Other can work properly。
作者: chacha    時間: 2009-7-21 16:03
Any Ching can advise if I can find the spare chassis
bigbigboy 發表於 21/7/2009 12:03

非常懷念,三和電變 ,都爛得好犀利喎,重連埋張報紙一齊放。
作者: dennis2008    時間: 2009-7-21 16:58
14# bigbigboy


師兄:底板及二樓板,我好似有多,但不是完裝,叫朋友DIY的後傋PARTS位不太準,我今晚有車局,回家睇睇找不找到。
作者: bigbigboy    時間: 2009-7-21 23:12
14# bigbigboy


師兄:底板及二樓板,我好似有多,但不是完裝,叫朋友DIY的後傋PARTS位不太準,我今晚有車局,回家睇睇找不找到。
dennis2008 發表於 2009-7-21 16:58


Thanks a lot Dennis 兄
作者: batcat    時間: 2009-7-25 19:24
Thanks a lot Dennis 兄
bigbigboy 發表於 21-7-2009 23:12


C-hing, Please don't forget to share the photo for your re-builted RS401i.  Look farword to see it!!!
作者: dennis2008    時間: 2009-8-29 16:44
本帖最後由 dennis2008 於 2009-8-29 16:46 編輯

[attach]296114[/attach]師兄:不好意思因早前比較忙沒有時間找東西,現己找到底板及二樓板,可以免費送給你,請與我聯絡。謝謝!
作者: chacha    時間: 2009-8-30 02:08
好新淨喎,極品,
作者: ryancmlam    時間: 2009-8-30 07:55
三和300 ar...
作者: bigbigboy    時間: 2009-8-30 08:08
19# dennis2008


Thank you very very very very much Dennis Hing   
I have PM U.
作者: swswsw    時間: 2009-8-30 09:41
watch this post late....
I placed it into rubbish bin... last month...
as forgot what car it is...
作者: swswsw    時間: 2009-8-30 09:42
I remember ... order the rear "dog-bone" from Sin Sin .... at that time...
over 20years ago...




歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/) Powered by Discuz! X3.2