標題: LIPO QUESTION FOR L3 AND L4 [打印本頁] 作者: Evo5 時間: 2010-9-28 23:10 標題: LIPO QUESTION FOR L3 AND L4 CAN ANY CHING TELL ME WHAT TYPE OF LIPO I CAN USE FOR L3 AND L4 ?
DO I NEED TO USE SADDLE PACK ?作者: hardmankam 時間: 2010-9-28 23:47
Are you planning to run 1s Lipo (3.7v) or 2s Lipo (7.4v)?作者: Evo5 時間: 2010-9-29 00:06
2s 7.4
fgdfgdgd作者: hardmankam 時間: 2010-9-29 00:24
if 2s... then its best to buy 1/18 7.4v lipo
then install the battery on one side of the t-bar, and on the other side, mount the esc & receiver.
You may NOT be able to fit the 1/12 shell if you use normal lipo saddle pack.作者: jf813 時間: 2010-9-29 09:53
or you can add spacer under the lipo to clear the t-bar and mount it sideway. I had seen ching mount 5000 stick pack on a L4 this way. Not the best way to do it but it works. I may not fit the AMR but older protoform body and 09 body will fit without issue.作者: rcmodel 時間: 2010-9-29 15:07
7.4v. 分體lipo 都得
Not the best way to do it but it works. I may not fit the AMR but older protoform body and 09 body will fit without issue.