RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: KO ESC - 中位及極速測試器 [打印本頁]

作者: rk2 時間: 2012-11-7 22:08
標題: KO ESC - 中位及極速測試器
KO ESC - 中位及極速測試器, 我當年是用在 CX II 的.

作者: tiger1 時間: 2012-11-7 22:28
so much fun

作者: siukuenchi 時間: 2012-11-7 23:34
what is it??

作者: rk2 時間: 2012-11-8 10:39

siukuenchi 發表於 2012-11-7 23:34

登錄/註冊後可看大圖

what is it??

that means you are not old enough.

作者: siukuenchi 時間: 2012-11-8 10:50

rk2 發表於 2012-11-8 10:39

登錄/註冊後可看大圖

that means you are not old enough.

maybe just because I'm not "pro" enough, or not up to standard at all ~~

not much data available from web.

seems it's for some early ESC.

Can you share some more information on this?

Thanks ar~

作者: fbs 時間: 2012-11-8 11:44
It is use to check whether there are any pulse come from the ESC. The old style ESC, it operate at the R/C system frequency and use pulse width modulation to control the motor speed. If the duty cycle is not 100% ( that means there is pulse from the ESC ) the motor is not operate at full speed. The green and red light represent forward and full speed ( 100% duty cycle - not voltage pulse ) respectively.

作者: emaxxyeung 時間: 2012-11-8 11:49
this stuff is for early KO ESC to set up the High point and the Neutral without the Motor.
( RM 7,CX I,CX II, CX III.....)

作者: siukuenchi 時間: 2012-11-8 16:08
oh I see! Thanks ar ~~

作者: terrykan 時間: 2012-11-8 16:40
我都有一個！

作者: rk2 時間: 2012-11-9 11:13

fbs 發表於 2012-11-8 11:44

登錄/註冊後可看大圖

It is use to check whether there are any pulse come from the ESC. The old style ESC, it operate at t ...

Thanks, 很詳細的說明, 你唔講我仲以為係 detect voltage 的 .. . . .

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)