Genetic---CUBE (up dated 1/11)

The shell looks fantastic

[ 本帖最後由 James 於 2006-1-12 00:24 編輯 ]

Oh no, I live in MongKok, its far away, lets see if I can arrange in the future.

Thanks.

原帖由 gibson 於 2006-2-8 23:19 發表
For playing no problem, I do have another M cars to play, M03 and M04

                               
登錄/註冊後可看大圖

Where are you playing now?  Actually I have dif ...

We have regular 1/10 touring gathering outside Western Indoor Sport Centre at every Saturday nite starting from 10 pm.. come & join us .. u may bring along with any kind of ur babies .. our team got nearly all of them ...
Check it out here
http://bbs.rc-evo.com/viewthread.php?tid=133&extra=page%3D1
or here
http://rc-one.com/phpwind/thread.php?fid=13

For playing no problem, I do have another M cars to play, M03 and M04

                               
登錄/註冊後可看大圖

Where are you playing now?  Actually I have different kinds of cars, TB IV MS and 415 MS, now I am playing TA03 TRF and TA04 tuned.

One more.

                               
登錄/註冊後可看大圖

[ 本帖最後由 gibson 於 2006-2-8 23:22 編輯 ]

原帖由 gibson 於 2006-2-8 22:30 發表
Very nice van.  I still do not have time to make it and do not know how long it will stay NIB.  Too bad.

^_^ ...  I dont think it can spend you hrs to finish it .. since one single colour will make it simple & handsome already .. Post urs upon accomplished.. or u may join us at Western to share the fun ..

原帖由 benz1850 於 2006-2-8 13:40 發表
Brother Kawada, thank you very much.  Your info. already great help to us.  And your Estima great also!!!!

U r welcome .. always..

Very nice van.  I still do not have time to make it and do not know how long it will stay NIB.  Too bad.

Brother Kawada, thank you very much.  Your info. already great help to us.  And your Estima great also!!!!

原帖由 benz1850 於 2006-2-7 22:48 發表
Mr. Kawada, could you take more picture about your LED layout?  and the part number or spec. for the LED, if the LED light set is DIY.  Appreciate for your help as I want to DIY a light set as well ...

Hi .. u need to get urself the followings : -

1. Ultra Bright LED - variety of colours available like .. Blue, White, Yellow .. for brake light u may choose Ordinary RED Led more cheaper only around $1 each
2. Resistor to stabalize the voltage ..u may ask the shopper for recommendation .. output 6V and regulate to suit the LED input voltage .. solder those resistor to each of the LED ( + ) - if I'm not wrong pls confirm with the shopper also
3. receiver plug + wires ..

Hope this help

[ 本帖最後由 kawada 於 2006-2-8 16:29 編輯 ]

原帖由 gibson 於 2006-2-7 23:27 發表
I just received my ABC light set from Action Hobby, the price is a bit crazy HKD28x, but it is really complicated.  This unit will co-operate with the ESC with the brake light effect and when the t ...

Its quite reasonable indeed .. it sold at similar price in Japan also .. I think the ABC light set is the most comprehensive unit for RC body lights .. it also bundled with a set of lexan light bucket that can be mount on different bodies ..

Cheers
Thz how it look like on my Estima

[ 本帖最後由 kawada 於 2006-2-8 12:38 編輯 ]

原帖由 skywork 於 2006-2-7 18:30 發表

Hi Kawada,  I just try connect led to RX ch3, when I press full throttle,led will dim ! Is it ok ?will it harm RC unit?

Yo .. congrat for ur success .. but mine will dim once i switched on my receiver .. furthermore, inorder to stabilize the output voltage ( 6V powered by receiver ) recommend to solder a resistor to each of the LED .. ( sorry cant remember the exact figure of the resistor )

Nope it wont hurt a bit .. will only consume ur battery that makes ur vechile run time shorter ( around 2 to 3 mins  ) thz all

[ 本帖最後由 kawada 於 2006-2-8 12:31 編輯 ]

I just received my ABC light set from Action Hobby, the price is a bit crazy HKD28x, but it is really complicated.  This unit will co-operate with the ESC with the brake light effect and when the throttle is in the neutral position, the four hazard lights will on.  The set included a transparent light bulbs holder for any 1/10 rc car.  
This set is really good design.

Mr. Kawada, could you take more picture about your LED layout?  and the part number or spec. for the LED, if the LED light set is DIY.  Appreciate for your help as I want to DIY a light set as well....  Thanks in advance

ABC....more realistic...

原帖由 James 於 2006-2-7 04:08 發表


Yes i will...but not started yet.....I have got some LED lights from the "electrical shop"...just gonna DIY....what kind of special features does the light kit has?

Which set u are preferring .. Br James ..

M got both Yokomo & ABC ..

A. Yokomo
Head Light - Constant Flashing
Hazard Light - Turns on 5 sec when throttled neutral
Brake Light - Constant Flashing
Tail light - Constantly lighted

B. ABC

Head Light - Constantly Lighted
Hazard Light - Flashing when throttled neutral
Brake Light - Flashing when braking
Tail Light Constantly lighted

I think DIY is much more cheaper & u may choose variety of coloured LED u want . .. Only cost less than $60HK for 8 to 10 LEDs with wirings & plug ( connect to 3ch of ur receiver )
Like that

                               
登錄/註冊後可看大圖

[ 本帖最後由 kawada 於 2006-2-7 12:28 編輯 ]

原帖由 gibson 於 2006-2-6 21:56 發表
Bro James, will you put the lights in your cube.  I just order the lights with action hobby, awaiting their phone call.  Do you know the ABC lights set have any special functions. I want to order t ...

Yes i will...but not started yet.....I have got some LED lights from the "electrical shop"...just gonna DIY....what kind of special features does the light kit has?

噴左個shell未ar....有就post o黎睇o下la~~~

The light set not arrive yet, I just placed an order, will post once I got it.

Brother Gibson, how much for the lights set?

Bro James, will you put the lights in your cube.  I just order the lights with action hobby, awaiting their phone call.  Do you know the ABC lights set have any special functions. I want to order the SSG carbon chassis, but too expensive.  Around HKD500, crazy.

[ 本帖最後由 gibson 於 2006-2-6 21:57 編輯 ]

the different between the front and rear arms....they are slightly different.....i didnt notice that at the beginning as well...