Serpent 977 almost ready to go ...

977 is almost done, IDM engine on it ;)
Still need to install clutch and prepare bodyshell.

登錄/註冊後可看大圖

Just sharing although I know it could be quite poisoning ...

No xray rx8 for time being ... But interested to see the e version of rx8

師兄要嚟星加坡同我玩977 .... ;)

其實仲有好多Capricorn 同埋MRX5

登錄/註冊後可看大圖

Garden by the Bay,  Night Safari 值得一去
飲飲食食我會去 one ninty (four seasons Singapore) 同埋 east coast park 概 play ground入面概1-twenty six.
地道食物可以去old airport road HDB 入面概大排檔找找.
Hope this helps.

My friend was driving my 966 TE yesterday

http://www.youtube.com/watch?v=L8zrYNw84so

Rock

We call it PA track or RMCM track here in Singapore.
It is along east coast park, towards airport side.
See the track RMCM from the map in the URL :
http://www.streetdirectory.com/s ... 962/8432_75668.html

Are you staying in Singapore too ?
Ernest

Alex, build of 977 is not bad, only minor touch is required. Fitting well and smooth. Except the quality of ball bearings ;)
Yet to start mrx5wc.
Busy at other project now ;)

Alex, welcome to 1/8 world ;)
I found it very fulfilling with the speed and the sounds ;)  dark side of RC world ... ...

My friend driving my 977 with IDM engine today
The engine is still on early stage after initial run in ;)
Love the chassis over my old 966TE

http://www.youtube.com/watch?v=7YhRY7FJ_NU

Ipsum 發表於 2013-6-8 00:13
Hi ernest so long no see. I bet you and I were amongst the old-cakes in this hobby. I (diva) haven't ...

Diva - how are u doing ?
Still running RC ? I think most of the old cakes group are no longer in the RC field ....
;)

EricRC 發表於 2013-6-8 00:54
Hi, Ernest, Where can I get 1/8 on road nitro cars in Singapore? I may pay a visit to the shops ne ...

Eric

Search this one Facebook

Racecraft Infinity

Address is :
address: 81 UBI ave4 #02-15
Singapore 408830

Beside the onroad GP track, there is also a EP onroad and off road track in Bottle Tree Park, north part of Singapore ;)

Diva, nice to hear from you and learn that you are still in the hobby with your little boy !!
The old days we had in PYC were really fun

Tried the Motonica foam tires yesterday on 977, it performs very WELL
Front 35 Rear 37

登錄/註冊後可看大圖

Yes Mr Mak quit RC for years
His photos are high quality and beautiful !

Up to last Sat, total ran about 30 tanks no including engine run-in.
977 performs well, only damage is the plastic servo saver  plate. Time to change to alloy option part.

Have not changed the conrod on IDM yet
Check it after run every Sat, will change within the next 2-4L ;)

Broke the rear belt last week and also opened IDM engine to clean up.
Changed to Picco Torque engine with Mugen clutch today, and Protoform PFL 128 body shell.
Anther 30 tanks on the road today ;) Finished 3 new sets of tires

I changed to Mugen clutch only because I have spare unit, nothing wrong on the 977 clutch which is still on IDM engine