Xray 將發佈T4 2018

1. 想調較後toe in 同toe out 係咪透過換uprights 來調較？原裝跟車個uprights係0度，係咪表示無任何toe in 同toe out?  如果換上1度uprights 係咪代表架車後toe in 係1度？
No. Toe in / out you need to change ECCENTRIC BUSHINGS. Please see manual P.14.
2. 想調較後camber 係咪透過調較拉桿長度來調較？
Yes
3. 想調較前toe in 同toe out 係咪透過換c hubs 來調較？原裝跟車c hubs 係4度，係咪表示toe in 係4度？
No. c hub 4度 is caster angle. Not Toe in / out angle
4. 想調較前camber 係咪透過調較果兩條轉向拉桿長度來調較？
No.

Ching. Looks like you need to study this handbook first -> https://www.hudy.net/xhudy/produ ... ef6125c9fbe410a41bf
What is droop, ride height, caster, camber ,toe in/out first. It's very good to understand how to setup your touring car from beginning.

Also, you can found a lot of factory driver setup here as reference -> http://site.petitrc.com/reglages/xray/SetupSheetsXRayT4.html

For JV settting, I think nobody can answer your question actually. Different drive style have different setup. Here is T4 15/16/17 for you reference.
Front Toe in ->  1 or 1.5
Front Camber -> 1.5 or 2.0 ( use different tires have different camber angle )
Droop front 5.0 / Rear 4.0
Ride Height -> Front 5 / Rear 5.2
Rear Toe Out -> 2.5 / 3.0
Rear Camber -> 1.5 or 2.0 ( same as Front camber )
Front roll-bar 1.3 / Rear 1.3
Shock Oil - 450cst
Spring -> 2.7 /2.7 which I run Mod 4.5T

1. 如果跟default 全0 ,好似係，好似咋，頭係2度toeout尾3度toe in. 要上架度先知
2. 係
3. 玩 Touring car 頭caster 大多數時間都係頭4度尾0度，唔係唔重要，不過好少去改.

我諗大約仟六七，不過炭版之類已經有副廠出咗，金屬同油壓就要正廠啦