RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
樓主: purplestar
打印 上一主題 下一主題
收起左側

NT-18

[複製鏈接]
1#
Sinly 發表於 2006-8-6 17:50:05 | 顯示全部樓層
原帖由 purplestar 於 2006-3-10 22:59 發表
新一派Hi-tech 85MG 梗係好啦, 當年M18 年代...有部份係回唔到中...
85MG 其實保養及維修都好方便.
正常使用的話, 佢只係會爛裏面唯一一粒的膠gear. 而且仲有parts 賣.

咪係囉, 我都覺得同6.v 電係冇關係.. ...



會唔會係這個問題

Important Warning!
Use Standard Response Mode radio setting only

Please note that the XMS01MG XRAY Micro Servo is an analog servo and therefore it is required and necessary that you set your radio transmitter to Standard Response Mode, not High Response Mode.

If you set your radio to High Response Mode (or similar), you run the risk that the servo electronics will become damaged, possibly resulting in servo failure.

For more information about setting up your radio, please see the instruction manual supplied with the radio.
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-5-3 01:07 , Processed in 0.057081 second(s), 16 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表