本帖最後由 powis 於 2010-9-26 21:43 編輯
Let me share some experience on the Sabre FD. I am a beginner on front wheel car.
Today just try it on JV track, bascially followed the most settings on the setup sheet from TOP. The details are:
Camber : F & R are 2 degree
Toe : F toe in 1 degree, R default
Dampers spring : original one
Dampers oil : F35 R30
Downstop : F and R are 3mm
Ride height : F 4.5mm R 5.5mm
Motor : SpeedPassion competition 13.5RPinion gear : 18T
ESC : Hobbywing 120A with turbo mode
Tire : 36R
When I decrease the throttle while go into 灣, the car will "Nut"尾 at the 灣尾. 反而when the speed is high and go into and leave the 灣 , with the low turning angle, the car can smooth to go.
Sometime when i try to accelerate a bit during cornering, the car will easy to cup 4.
So generally i think that i still need time to set up the car correctly for JV, but the feeling is good when the car is cornering on some low speed 灣 because the car cornering response is fast, or too fast. |