RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 8706|回復: 28
收起左側

My GF1 (mod) x VMII

  [複製鏈接]
IS520 發表於 2011-8-22 00:58:58 | 顯示全部樓層 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
本帖最後由 IS520 於 2014-1-28 17:40 編輯

New shell and several internal modification.

相片-0053.jpg
相片-0054.jpg
相片-0055.jpg
相片-0056.jpg
相片-0057.jpg
 樓主| IS520 發表於 2011-8-22 01:00:56 | 顯示全部樓層
Lipo holder & front damper plate.


相片-0046.jpg
相片-0047.jpg
相片-0048.jpg
相片-0049.jpg
相片-0050.jpg
相片-0051.jpg
相片-0052.jpg
rodmanwing 發表於 2011-8-22 01:05:04 | 顯示全部樓層
wow good
yy0000yy 發表於 2011-8-22 03:58:58 | 顯示全部樓層
回復 IS520 的帖子

應該好好飛
msl 發表於 2011-8-22 06:49:17 | 顯示全部樓層
Very nice!
soniccat 發表於 2011-8-22 09:58:20 | 顯示全部樓層
請問 C Hing 個電池架點改呀?請指教下吖!
lingryan 發表於 2011-8-22 10:12:05 | 顯示全部樓層
請問 c hing 個電池架點改架?請指教下oY~~~ x 2
我仲用緊膠紙炸...
z0michael0z 發表於 2011-8-22 11:56:58 | 顯示全部樓層
電架好正WOW! 不過試過炒車撞到電架柱,低板都爆o左
batcat 發表於 2011-8-22 11:58:55 | 顯示全部樓層
 樓主| IS520 發表於 2011-8-22 22:19:07 | 顯示全部樓層
回復 msl 的帖子

多謝欣賞
 樓主| IS520 發表於 2011-8-24 18:03:56 | 顯示全部樓層
回復 soniccat 的帖子

個電池架可以分2部份去講,
1) 壓電面板及2支企柱, 祗係 (死光) 現成材料,
    如這post: http://bbs.rc-evo.com/forum.php? ... &extra=page%3D6
    這部分長度非常goodfit, 無需任何修改.
2) 扣電的扣板, 1個 L型, 1個C型, 係自己度位訂製的,
    材料: 3mm厚碳殲板.

注意部份:
1) 扣電扣板不可太薄, 否則固定不到電池,
2) 主要針對使用方型 lipo, 度位時要度準d喇,
3) 因為 mcar 輪距比較短, 小心扣板會碰到車轆, 特別係轉向中既頭轆,
4) 因應自己使用 lipo 既高度, 於扣板上下加上1mm介子作調整,
   壓電就不會太緊 / 過鬆.

sniper 發表於 2011-8-24 22:56:25 | 顯示全部樓層
IS520 發表於 2011-8-24 18:03
回復 soniccat 的帖子

個電池架可以分2部份去講,

利害利害
tarotrex 發表於 2011-8-26 12:20:18 | 顯示全部樓層
利害利害x
BAOJIANHUA 發表於 2011-8-27 23:31:38 | 顯示全部樓層
IS520 發表於 2011-8-24 18:03
回復 soniccat 的帖子

個電池架可以分2部份去講,

Very good idea~  Thanks~~~

I changed my VMII to RR drive.
 樓主| IS520 發表於 2011-8-28 00:46:52 | 顯示全部樓層
回復 BAOJIANHUA 的帖子

Just put the front belt out, and still use the rear ball diff.?
BAOJIANHUA 發表於 2011-8-28 09:10:29 | 顯示全部樓層
IS520 發表於 2011-8-28 00:46
回復 BAOJIANHUA 的帖子

Just put the front belt out, and still use the rear ball diff.?

not really. put the front belt out, and also put the 三节棍 out. And change the rear ball diff with 齿差。

What's more, for a better balance. I changed the direction of the battery. and also move the servo 1cm to the central line.
 樓主| IS520 發表於 2011-8-28 10:07:01 | 顯示全部樓層
回復 BAOJIANHUA 的帖子

Interesting, can share some photo here ?
Btw, after you put out the 三節棍, how you fix the front wheel ?
BAOJIANHUA 發表於 2011-8-28 18:41:01 | 顯示全部樓層
IS520 發表於 2011-8-28 10:07
回復 BAOJIANHUA 的帖子

Interesting, can share some photo here ?

Pls check my photo
BAOJIANHUA 發表於 2011-8-28 18:42:43 | 顯示全部樓層
Oh sorry. I still have no right to upload my photo to the forum~~~~~

                               
登錄/註冊後可看大圖

                               
登錄/註冊後可看大圖

                               
登錄/註冊後可看大圖

                               
登錄/註冊後可看大圖

                               
登錄/註冊後可看大圖


I need more 25 points~~~

                               
登錄/註冊後可看大圖

                               
登錄/註冊後可看大圖

                               
登錄/註冊後可看大圖
 樓主| IS520 發表於 2011-8-28 20:37:05 | 顯示全部樓層
BAOJIANHUA 發表於 2011-8-28 18:42
Oh sorry. I still have no right to upload my photo to the forum~~~~~

I need more 25 points~~~

If you keep to share your experience at here, it would be a short time to upgrade the level.
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-4-16 18:12 , Processed in 0.060800 second(s), 18 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表