請問深水埗附近有無船仔店..!!!!!

Barry28 發表於 2011-11-12 18:36

                               
登錄/註冊後可看大圖

Are you talking about Ah Wing & Master Fok ?

yes, may be not many ppl in this group know that shop!

果奸精 x  果次入去塭船尾机, 果個爛 9 玩具開我 $ 250 仲話兩個平D 仲要專登系架船度拆出泥 , 我緊系冇要, 卒之走左去快 jet 買個 唊 也母 GTX-550 都系 8 舊

joeleung 發表於 2011-11-13 11:33

                               
登錄/註冊後可看大圖

yes, may be not many ppl in this group know that shop!

I have bought propella and shaft from this shop.  They are very good guys and cut the shaft to my desired length for me.

mercedes 發表於 2011-11-14 16:34

                               
登錄/註冊後可看大圖

I have bought propella and shaft from this shop.  They are very good guys and cut the shaft to my  ...

yes, they are very good guy, when i still studying, i often go to there to blow water with them for an afternoon without consume anything, they teach me a lot of model making technique and you can order the kits or parts overseas through them with a very reasonable price.

joeleung 發表於 2011-11-14 17:57

                               
登錄/註冊後可看大圖

yes, they are very good guy, when i still studying, i often go to there to blow water with them fo ...

Yes, we should endorse those shops that are reliable, helpful.  This shop is one of the shops that I would like to recommend to other chings.

Ah Wing & Master Fok
師兄可否告知舖頭在哪??

九龍 深水埗 大埔道 75號 (與北河街交界) 威信廣場 tel : 2728-6680

原來係依度~
係咪上二樓右邊第一間??
重門深鎖... 果次特登去仲以為搵唔到添!!

今日6時第一次上去威信，重門深鎖。從玻璃望入去，大吃一驚，入面亂過亂葬崗。吾似一間模型鋪。我想係模型船生意難做。

大孖 發表於 2011-11-15 23:40

                               
登錄/註冊後可看大圖

今日6時第一次上去威信，重門深鎖。從玻璃望入去，大吃一驚，入面亂過亂葬崗。吾似一間模型鋪。我想係模型船 ...

他們的主力不是做門市

kahungboy 發表於 2011-11-15 17:37

                               
登錄/註冊後可看大圖

原來係依度~
係咪上二樓右邊第一間??
重門深鎖... 果次特登去仲以為搵唔到添!!

冇錯 , 就是此處 . 唔好睇小 ,  " 臥虎藏龍 "

mercedes 發表於 2011-11-16 11:09

                               
登錄/註冊後可看大圖

他們的主力不是做門市

吾通要預約........"開門未呀老細？"

大孖 發表於 2011-11-16 15:32

                               
登錄/註冊後可看大圖

吾通要預約........"開門未呀老細？"

You go there in the afternoon.

星期六去走一趟

mercedes 發表於 2011-11-16 15:40

                               
登錄/註冊後可看大圖

You go there in the afternoon.

I went there yesterday at 6:00pm already which was golden time, but it was still closed.

大孖 發表於 2011-11-16 15:45

                               
登錄/註冊後可看大圖

I went there yesterday at 6:00pm already which was golden time, but it was still closed.

6pm may be too late as it is already evening.  Try to go there i the afternoon.

mercedes 發表於 2011-11-16 16:00

                               
登錄/註冊後可看大圖

6pm may be too late as it is already evening.  Try to go there i the afternoon.

Noted with thanks.

bcr2000 發表於 2011-11-16 12:11

                               
登錄/註冊後可看大圖

冇錯 , 就是此處 . 唔好睇小 ,  " 臥虎藏龍 "

真係" 臥虎藏龍 "老細佢真係好勁,特別係快船,油船電油船潛水艇像真船机加工...........................................可以講係我見過最勁最全面嘅模型制作人,直頭係我偶像心服口服嘅人人



    不過佢有個死穴就係噴油

回復 ar- 的帖子

英雄所見略同.

回復 ar- 的帖子

AR 大師出現啦, 幾時得閒飲茶..