RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 5662|回復: 10
收起左側

H.P.I. Racing Savage XS (SS)

[複製鏈接]
hobbyhobby 發表於 2012-4-18 16:21:55 | 顯示全部樓層 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
H.P.I. Racing Savage XS (SS)
 樓主| hobbyhobby 發表於 2012-4-19 03:08:41 | 顯示全部樓層
本帖最後由 hobbyhobby 於 2012-4-19 03:09 編輯

parts for HPI Electric Savage XS
SSXS288

                               
登錄/註冊後可看大圖



Steel CVD drive shaft XS
This is the Universal CV Set for HPI Savage XS

FEATURES:
#45 steel Steel construction, Harden to a jet black finish

YOU WILL RECEIVE:
Two Dogbones, two Axles, two 2x10mm Axle Pins, two 3.2 x7mm Pins and
two 12.8mm diameter spacers

REQUIREMENTS:
Installation between diff and wheel hubs

SPECIFICATIONS:
length: (120mm)
diameter: .14 (3.5mm)
This part is available for sale or distribution


 樓主| hobbyhobby 發表於 2012-4-19 03:09:45 | 顯示全部樓層
本帖最後由 hobbyhobby 於 2012-4-19 03:10 編輯

parts for HPI Electric Savage XS
SSXS39

                               
登錄/註冊後可看大圖



hardened steel Wheel Axle 5x40mm SXS
Replace the stock outdrives in your Savage XS with
these Lightened Steel Harden Wheel Axle 5x40mm



FEATURES:

CNC #45 Carbon Steel construction with nitride coating to increase wear resistance, and enhance corrosion resistance, black in color


YOU WILL RECEIVE:

Two Light weight hardened steel Wheel Axle 5x40mm
Replacment of HPI101228



REQUIREMENTS:

Installation



This part is available for sale or distribution


 樓主| hobbyhobby 發表於 2012-4-19 03:10:55 | 顯示全部樓層
本帖最後由 hobbyhobby 於 2012-4-19 03:11 編輯

parts for HPI Electric Savage XS
SSXS41M

                               
登錄/註冊後可看大圖



Hardened differential Gear Shaft Cup 5x23.5 mm
Replace the stock outdrives in your Savage XS with
these Lightened Steel Differential Outdrives from Hot Racing


FEATURES:

Steel construction, black in colorCNC #45 Carbon Steel construction with nitride coating to increase wear resistance, and enhance corrosion resistance, black in color








YOU WILL RECEIVE:

Two Light weight Gear Shaft 5x23.5mm
Replacment of HPI101230


 樓主| hobbyhobby 發表於 2012-4-19 03:11:49 | 顯示全部樓層
本帖最後由 hobbyhobby 於 2012-4-19 03:12 編輯

parts for HPI Electric Savage XS
SSXS41C

                               
登錄/註冊後可看大圖

Hardened Light weight Center Cup Joint SXS
Replace the stock outdrives in your Savage VX with
these Lightened Steel Center Differential Cup Joint from Hot Racing


FEATURES:

CNC #45 Carbon Steel construction with nitride coating to increase wear resistance, and enhance corrosion resistance, black in color


YOU WILL RECEIVE:

One Light weight CUP Join 5x10x15mm
One Light weight Cup Join 5x10x19mm

Rplacment HPI106437 and 106439

REQUIREMENTS:

Installation







This part is available for sale or distribution


 樓主| hobbyhobby 發表於 2012-4-19 03:12:55 | 顯示全部樓層
本帖最後由 hobbyhobby 於 2012-4-19 03:13 編輯

parts for HPI Electric Savage XS
SSXS3254

                               
登錄/註冊後可看大圖

Li-Wt Hardened Steel 32T-54T Idler Gear SXS
This is the optional Hot Racing Lightweight 32T - 54T Idler Gear for the Savage XS.







FEATURES:
CNC Machined Lightweight Precision Gears with Standard 4140 steel
Reduce internal rotating mass and Increase efficiency.
Casehardened for durability.
EZ to identify Silver ring with laser marking






YOU WILL RECEIVE:
One Lightweight 32T - 54T Idler Gear for the Savage XS.


 樓主| hobbyhobby 發表於 2012-4-19 03:13:58 | 顯示全部樓層
本帖最後由 hobbyhobby 於 2012-4-19 03:14 編輯

parts for HPI Electric Savage XS
SXS1901

                               
登錄/註冊後可看大圖


Alum. Front C-Hub Savage Xs
This is the optional Hot Racing CNC Billet Machined
Front c-hub Carrier for use on the Savage SX.


FEATURES:
Aluminum construction
Anodized Black in color

YOU WILL RECEIVE:
One Pr. CNC Billet Machined Front C Hub Carrier


REQUIREMENTS:
Installation Front Arm

SPECIFICATIONS:
length: 35mm (1.38")
width: 15mm (0.59")
height: 22.5mm (0.89")

This part is available for sale or distribution


 樓主| hobbyhobby 發表於 2012-4-19 03:14:47 | 顯示全部樓層
本帖最後由 hobbyhobby 於 2012-4-19 03:15 編輯

parts for HPI Electric Savage XS
SXS2101

                               
登錄/註冊後可看大圖

Alum. Steering Knuckle Savage Xs
This is a set of Hot Racing Aluminum Steering Blocks
for the HPI Savage XS Series.

FEATURES:
6061 T6 Aluminum Construction
Anodized Black in Color
CNC Machined

YOU WILL RECEIVE:
Two Aluminum Steering Blocks

REQUIREMENTS:
Installation into Vehicle


This part is available for sale or distribution

 樓主| hobbyhobby 發表於 2012-4-19 03:15:35 | 顯示全部樓層
本帖最後由 hobbyhobby 於 2012-4-19 03:15 編輯

parts for HPI Electric Savage XS
SXS2201

                               
登錄/註冊後可看大圖

Alum. Rear Hub Knuckle Savage Xs
These are the optional Aluminum Steering Knuckles for the Savage XS from Hot Racing



FEATURES:
CNC 6061 aluminum Aluminum construction



YOU WILL RECEIVE:
Rear Aluminum knuckles


REQUIREMENTS:
Installation on Savage XS

This part is available for sale or distribution

 樓主| hobbyhobby 發表於 2012-4-19 03:16:31 | 顯示全部樓層
本帖最後由 hobbyhobby 於 2012-4-19 03:16 編輯

parts for HPI Electric Savage XS
SXS1801

                               
登錄/註冊後可看大圖


Alum. heat sink Motor Plate SXS
This is the optional Metal Motor Mount for the HPI Savage XS chassis Truck.

FEATURES:
Offers more precise gear engagement and higher heat dissipation than
stock mounts

YOU WILL RECEIVE:
One optional Metal Motor Mount for the HPI Savage XS chassis cars

REQUIREMENTS:
Installing in vehicle

SPECIFICATIONS:
length: (80mm)
width: (65mm)
Thickness: (3mm)
This part is available for sale or distribution


 樓主| hobbyhobby 發表於 2012-4-19 03:17:49 | 顯示全部樓層
本帖最後由 hobbyhobby 於 2012-4-19 03:18 編輯

parts for HPI Electric Savage XS
SSXS68MR148

                               
登錄/註冊後可看大圖



HD Rally tune Spring set. SXS Wraith Ridgecrest
This is the Multi and Linear rate Spring Set for the HPI Savage XS Shocks or Warith and Ridge crest





FEATURES:


Spring Steel Construction
Linear-Rate spring allow more predictable linear dampening

Multi-Rate Springs, Dual-Rate (DRS) allow the optimum spring rate for each application. These multi-rate springs are soft at the beginning to soak up the small bumps, but transitions (crosses over) to the stiff part of the rate to resist bottoming on jumps and other big "hits. "





YOU WILL RECEIVE:


Two 1.2mm wire black 10 turn linear Rate Springs
Two 1.2mm wire Silver 13 turn Multi Rate Springs
Two 1.3mm wire gold 13 turn Multi Rate Springs


您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-3-29 20:03 , Processed in 0.690813 second(s), 16 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表