RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 3439|回復: 5
收起左側

Mini z MR 03 壞車問題

[複製鏈接]
 樓主| leetakr 發表於 2016-6-26 23:27:29 來自手機 | 顯示全部樓層 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
Mini z壞車問題:朋友架Mr 03 ,個原裝控控制唔到架車。架車一開就自動開著向後,要按油門向前才停。轉向又側埋一邊轉右轉唔到左。點算??
Motul 發表於 2016-6-26 23:54:08 來自手機 | 顯示全部樓層
未必係壞,油門可能錯左中位,轉向可能掉轉左轉向摩打線
 樓主| leetakr 發表於 2016-6-27 01:58:02 | 顯示全部樓層
How to reset please ?thx
路基亞 發表於 2016-6-27 03:31:40 | 顯示全部樓層
volvo9 發表於 2016-6-27 13:15:30 | 顯示全部樓層
To reset KT19 transmitter:
(1) Turn off the transmitter if it is on.
(2) Make sure that the steering trim knob is at the center position
(3) Turn the G.SPD L knob fully to the counterclockwise direction.
(4) Position of G.SPD H knob does not matter.
(5) Turn the steering wheel to the fully right position and push the throttle away to the full-brake position and hold them.
(6) Turn on the transmitter. The LED should flash rapidly; this means you are now in the factory mode.
(7) Release the steering wheel and throttle lever.
(8) Turn the steering wheel fully to the left, right, left and right, and then release it.
(9) Pull/push the throttle lever to full-throttle, full-brake, full-throttle, and full-brake, and then release it.
(10) Turn the G.SPD L knob to the right most position. The LED should become solid.
(11) Turn off the transmitter and on it again. You are done.
 樓主| leetakr 發表於 2016-7-11 01:47:03 來自手機 | 顯示全部樓層
攪店啦!多謝大家幫忙")
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-3-29 04:43 , Processed in 0.030415 second(s), 15 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表