RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 我的一位前輩所贈的古董 [打印本頁]

作者: 宏    時間: 2006-1-7 02:02
標題: 我的一位前輩所贈的古董
根據呢位前輩車主講,部車係70's產品,佢初中既玩具,真係古董,仲早過我出世呢...

[ 本帖最後由 宏 於 2006-1-7 02:05 編輯 ]
作者: 天照    時間: 2006-1-7 09:05
掃下O的塵好喎~!哈!
作者: carbuilder    時間: 2006-1-7 09:16
I can do it for you , free of charge
作者: carbuilder    時間: 2006-1-7 09:17
I can do it for you , free of charge
作者: mark999hk    時間: 2006-1-7 09:27
原帖由 於 2006-1-7 02:02 AM 發表
根據呢位前輩車主講,部車係70's產品,佢初中既玩具,真係古董,仲早過我出世呢...


Wah~~........the design is so simple.
作者: Bloodyhell    時間: 2006-1-7 09:30
"Nut and bolts + 4 wheels"  it might be a good car..donno hehe.
作者: miniz    時間: 2006-1-7 18:28
very simple
where is the servo mount ?? and where is the place  for battery?
作者: aloha    時間: 2006-1-7 18:39
快d去 ebay identify 個身份先...
順便睇下依家咩野價....
作者: 宏    時間: 2006-1-7 20:18
哈哈~~其實我都唔知呢架車係咩名堂...
不過設計真係好簡單,我都諗緊個sevro係應該點裝...
作者: miniz    時間: 2006-1-7 23:47
is it full set ?
作者: EricRC    時間: 2006-1-8 00:26
it is toyota celica gr.b which was produced by tamiya in 1978. it is called the "pan car".the lamborghini countach is also a member of the pan car family. ur chassis has missed lots of parts, so it looks simple. u may find some of the parts on ebay.but i donno whether it can b fully restored
作者: paulhung    時間: 2006-1-8 00:28
I have this car when I'm very young...

At that time, I (also my family) don't have enough money to buy R/C controller and battery...

But I still play it on the ground... by only pushing it... and pull it back...

I throw it away when I need removal...

but I am sure I know how to set the r/c and the place of battery...

because the car box have a colourful picture to show...
作者: barrypops    時間: 2006-1-8 00:30
I Think that it 's not produce by Tamiya, it was produced by ASOHIMA
作者: paulhung    時間: 2006-1-8 00:41
It missed some parts: (as much as I can remember)

1, Servo 鉄推杆

2, Battery 橡皮圈 with small holder

3, 原廠線圈變速

4, 膠天線管

I remember there is no "servo 柱" at this model.
作者: paulhung    時間: 2006-1-8 00:46
肯定不是雙星出的車!好像是叫青木XX的...

還有另一個殼是 "領先 - 蒙地卡羅" 型越野車...

不過沒有林保堅尼殼...
作者: 宏    時間: 2006-1-8 00:52
thx~paulhung 兄~@.@!!~
wow....真係堅...
不過我諗而家呢架車d parts 應該幾難搵吧...畢竟佢都成30歲車齡....
作者: paulhung    時間: 2006-1-8 00:59
1, Green area - Servo. 用雙面膠.

2, Red area - Battery. 用橡皮圈.

3, White area - Receiver + Receiver Battery (4.8v) + Servo for speed. 用雙面膠.

4, Yellow area - 原廠線圈變速
作者: paulhung    時間: 2006-1-8 01:08
This car is fairly heavy and very RAW, too.

VERY difficult to find his parts now...

But this car can run! You can use modern 1:12 or 1:18 r/c to control it...

Be careful that the 底板 can not support too heavy r/c stuff, 底板 will "墮"...!

I believe that after cleaning , it is still a 型 r/c car...!
作者: 宏    時間: 2006-1-8 03:59
原帖由 paulhung 於 2006-1-8 01:08 發表
This car is fairly heavy and very RAW, too.

VERY difficult to find his parts now...

But this car can run! You can use modern 1:12 or 1:18 r/c to control it...

Be careful that the 底板 can  ...

多謝你的資料~
我諗我會先盡力番新個車殼...
之後應該都係display car了~
作者: EricRC    時間: 2006-1-8 23:25
原帖由 barrypops 於 2006-1-8 00:30 發表
I Think that it 's not produce by Tamiya, it was produced by ASOHIMA

mayb i have made a mistake. coz tamiya produced a car similar to this one. they look the same. the only difference that i can tell was the front bumper. the part no. of the celica gr.b produced by tamiya was 5800x, u can get the info at tamiyaclub.com




歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/) Powered by Discuz! X3.2