RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: (求助) 無刷 + 鋰電 + charger 入門 [打印本頁]

作者: lam727 時間: 2008-11-6 14:19
標題: (求助) 無刷 + 鋰電 + charger 入門
無刷 + 鋰電 + charger

要注意D "mud" ??
Pricing?
Any post of website recommand?
Thanks a lot

[ 本帖最後由 lam727 於 2008-11-6 14:37 編輯 ]

作者: kkchung 時間: 2008-11-7 22:14

原帖由 lam727 於 2008-11-6 14:19 發表

 登錄/註冊後可看大圖

無刷 + 鋰電 + charger

要注意D "mud" ??
Pricing?
Any post of website recommand?
Thanks a lot

如果平玩無刷可以到廣華街看看好盈無碳套裝。充電器一般用G.T Power A6、Imax也很不錯了。鋰電如果是用於一些田宫特定車種如TL01可選IB的㘣角電池殼那些。主要小心是鋰電不能過充和過度放電，不過新一些無碳電變也可設定鋰電模式不怕過度放電。而無碳馬達最好不要高速空轉，有些馬達高速空轉會容易壞掉磁心。

作者: 呀瘋 時間: 2008-11-7 22:31
玩車同追女仔一樣,
最緊要「膽大心細面皮厚」
有咩唔識就問下模型舖d伙記,
佢地好多都好好人架!

作者: lam727 時間: 2008-11-11 11:32

原帖由 kkchung 於 2008-11-7 22:14 發表

 登錄/註冊後可看大圖

如果平玩無刷可以到廣華街看看好盈無碳套裝。充電器一般用G.T Power A6、Imax也很不錯了。鋰電如果是用於一些田宫特定車種如TL01可選IB的㘣角電池殼那些。主要小心是鋰電不能過充和過度放電，不過新一 ...

1) How much roughly for a basic set?
2) I have got "much more cell master", Is it ok for charging 好盈無碳套裝?
3) I decide to put the system on my TT01, Which Brand/type of batt. should I choose?
4) I am using the gear-ratio 25T/55T in my TT01, will the system burnt?

Thank you very much for helping.
Cheers

作者: hyuen 時間: 2008-11-16 00:04

原帖由 lam727 於 2008-11-11 11:32 發表

 登錄/註冊後可看大圖

1) How much roughly for a basic set?
2) I have got "much more cell master", Is it ok for charging 好盈無碳套裝?
3) I decide to put the system on my TT01, Which Brand/type of batt. should I choos ...

I want to know the answer too, coz i am also considering shall I change to brushless and use lipo or not...
thx brother

作者: lam727 時間: 2008-11-19 12:44

原帖由 lam727 於 2008-11-11 11:32 發表

 登錄/註冊後可看大圖

1) How much roughly for a basic set?
2) I have got "much more cell master", Is it ok for charging 好盈無碳套裝?
3) I decide to put the system on my TT01, Which Brand/type of batt. should I choos ...

Could anyone help? thanks

作者: hardmankam 時間: 2008-11-19 18:53
1) How much roughly for a basic set?
--> 好盈無碳套裝 is about $5xx in KWS

2) I have got "much more cell master", Is it ok for charging 好盈無碳套裝?
--> 好盈無碳套裝 is ESC + Motor only. (not battery) For lipo, you will need to buy a charger that is compatible with Lipo batteries.

3) I decide to put the system on my TT01, Which Brand/type of batt. should I choos ...
--> There are many brands of Lipo, like Or?on, Yea? Racing, etc.... it depends on your budget. $ range from $250 to $600

4) I am using the gear-ratio 25T/55T in my TT01, will the system burnt?
--> It depends on the final ratio of your TT01 and the speed of the motor. 55T/25Tx2.6 = 5.72 ... 13T motors should be ok, but not sure for 9T motors.

作者: zoozoo 時間: 2008-11-19 23:32
锂电记得唔好充满存放，甘样会好伤电池，严重会大肚，因为我试过

一般玩完放埋一边就算，玩果时再充。如果打算存放几个月就要充到7.6V左右再存放

作者: lam727 時間: 2008-11-24 12:40
Thank you very much

[ 本帖最後由 lam727 於 2008-12-30 14:49 編輯 ]

作者: solid 時間: 2008-11-26 18:07
標題: 回復 7# 的帖子
thank for sharing

作者: lam727 時間: 2008-12-23 12:31

原帖由 hardmankam 於 2008-11-19 18:53 發表

 登錄/註冊後可看大圖

1) How much roughly for a basic set?
--> 好盈無碳套裝 is about $5xx in KWS

2) I have got "much more cell master", Is it ok for charging 好盈無碳套裝?
--> 好盈無碳套裝 is ESC + Motor only. (not ba ...

2) Does "Much More Cell Master" has a function of parallel charge?
3) Would like to get a batt which has high MAh, 可以玩好多次(come用D), and safe(reliable brand, not easy to occur explosion). Any suggestions??
4) 55T/25Tx2.6 = 5.72, why do we need to x2.6?

Thanks a lot
Have a nice day & Happy New Year

[ 本帖最後由 lam727 於 2008-12-30 14:48 編輯 ]

作者: lam727 時間: 2008-12-30 14:53

原帖由 lam727 於 2008-12-23 12:31 發表

 登錄/註冊後可看大圖

2) Does "Much More Cell Master" has a function of parallel charge?
3) Would like to get a batt which has high MAh, 可以玩好多次(come用D), and safe(reliable brand, not easy to occur explosion). An ...

Can Anyone please help? thanks

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)