話0尼個0係頭直濕加萬向本身0既問題. 解決辦法就0係用有兩個萬向0既狗骨,如XRAY 0既ECS Drive Shaft 狗骨. 0尼個講法又是否正確? 不過XRAY0尼條狗骨有成52mm咁長,裝吾裝得落TA050度0尼? 作者: chowhungjai 時間: 2009-1-4 13:49
I have seldomly heard about using close diff. on the front axle on a RC car. What is the purpose to do that??? It is necessary to have a open diff. on the front axle during turning, coz the turing radius is not the same on the front wheels.作者: 3pk_supra 時間: 2009-1-4 14:01
你用的option料都是星星出品嗎?作者: rsx 時間: 2009-1-4 14:22
"但是當拆0左頭轆後再試, 這個情況又不會發生"
頭轆問題 ?作者: buggy 時間: 2009-1-4 15:12
I'd the same problem before, I just changed to use one way in the front.作者: newkid 時間: 2009-1-4 17:10 標題: 回復 2# 的帖子 yes. some ppl like to use open diff at the front as the inner and outer radii of the turning in are different. however, it is also popular for ppl to use direct spool at the front cuz it can give u more power steering. so, basically, it is trade-off. e.g. both the new tamiya 416WE and the 415MSXX verison comes with front direct spool.作者: newkid 時間: 2009-1-4 17:13
0係呀. 全部都是星星option料離0架.作者: newkid 時間: 2009-1-4 17:18
試過換其他兩套新轆都0係咁. 以前用單向就無0尼個問題.作者: newkid 時間: 2009-1-4 17:20
yes. i don't hv such problem when i was using front one-way in the past. however, there will be no front-wheel braking when using one-way. so, i constantly lock up the rear wheels and spin under braking. that's why i want to change to front direct spool lor.作者: chowhungjai 時間: 2009-1-4 23:52 標題: 回復 6# 的帖子 Thanks for your explanation!!!
