RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 國產pajero玩具 [打印本頁]

作者: speedstar 時間: 2006-5-26 19:41
標題: 國產pajero玩具
繼$95國產爬雞後, 又一抵買國貨, 出左幾年勒, 我諗好多雙星pajero迷都入貨了, 再見街邊有貨, 低價$110全包, 真係唔買對唔住自己...
雜廠冇鑽石牌既質數(差好遠), 不過有前後燈都幾過引, 玩殘左拾過殼落CC01都唔錯...

作者: mikewu 時間: 2006-5-26 20:02
I have seen this in Lap Liu St. before.. I think it came out around the same time as the hard shell Land Rover Defender...
But the stickers are.............

作者: speedstar 時間: 2006-5-26 20:58

原帖由 mikewu 於 2006-5-26 20:02 發表
I have seen this in Lap Liu St. before.. I think it came out around the same time as the hard shell Land Rover Defender...
But the stickers are.............

Yes...The land rover defender is not bad actually and I think it also suits CC01 chasis. However the defender has not headlight cover! Regarding the stickers, it is not a difficult job to remove it. Actually the body shell is quite hard, it can be repainted to whatever colors after stripping off of the stickers. Afterall, it is a 90% replica of Tamiya's Pajero RTR Lexan body but costs much much less.

作者: mikewu 時間: 2006-5-26 23:45

原帖由 speedstar 於 2006-5-26 20:58 發表

Yes...The land rover defender is not bad actually and I think it also suits CC01 chasis. However the defender has not headlight cover! Regarding the stickers, it is not a difficult job to rem ...

Oh.... I didn't notice about the headlight covers.... but I do know a few guys has already put it in the CC01 chassis and works perfect!
Hmm... stickers easy removal huh............. Time to take a trip to Arp Lui St. tomorrow......

Thanks for your info Mr. Speedstar!

BTW, do you know where I can find the Landie cover? A friend of mine is looking and I am not planning on selling mine to him...

作者: speedstar 時間: 2006-5-27 00:13
Hello Mikewu,
What do you mean by Landie cover? You mean Land Rover Defender? It is also available in Ap Liu Steet at around $120. An option of dark green or red body color.

By the way, referring to your previous post about refurbishment of Pajero. It seems that you can reproduce sticker. I have the original Pajero RTR version sticker. If you can reproduce it, then we can convert the China Pajero to Tamiya RTR look la...haha

If you are sure that the Defender can also fit CC01 then I will also buy one....it looks nice.

Just for sharing, for removal of sticker and residue, try "De-Solv-it". It works like magic!

[ 本帖最後由 speedstar 於 2006-5-27 00:20 編輯 ]

作者: mikewu 時間: 2006-5-27 00:24

原帖由 speedstar 於 2006-5-27 00:13 發表
Hello Mikewu,
What do you mean by Landie cover? You mean Land Rover Defender? It is also available in Ap Liu Steet at around $120. An option of dark green or red body color.

By the way, referri ...

Nice! It was sold out for a while because everyone was getting them and apply in CC01 ar, TXT ar and some other chassises.......
I didn't know they have red now! I only have the dark gray...
As for the stickers, I tried to copy it with original ones (I have a brand new set) but unfortunately I can't resolve the ones that are suppose to be transparent (like the V6 3000cc direct injection part)... the only ones I can use is the one at the "

ajero logo" for the spare tire, the license plates and rear hitch sticker.....

作者: speedstar 時間: 2006-5-27 00:41
Mikewu, don't forget to buy the short rear shaft to replace the long one before it runs out of stock!
I got two.

作者: coronafans 時間: 2006-5-27 11:18
幾正woo!

作者: jasonbb 時間: 2006-5-27 11:41
我都有一部~

作者: txzmxn 時間: 2006-5-27 15:12
Is that tire made with soft plastic? could it be install to tamiya rim?
since the price of tamiya tire for CC-01 already become $79/pare

作者: speedstar 時間: 2006-5-28 01:30

原帖由 txzmxn 於 2006-5-27 15:12 發表
Is that tire made with soft plastic? could it be install to tamiya rim?
since the price of tamiya tire for CC-01 already become $79/pare

Soft plastic, of course not the soft rubber tire as original Tamiya.
For playing for fun I think it is OK la.
I have seen photos on the web with it fitted to Tamiya rim.

作者: txzmxn 時間: 2006-5-28 19:59

原帖由 speedstar 於 2006-5-28 01:30 AM 發表

Soft plastic, of course not the soft rubber tire as original Tamiya.
For playing for fun I think it is OK la.
I have seen photos on the web with it fitted to Tamiya rim.

thx!

作者: speedstar 時間: 2006-5-30 19:49
不要看小這裡的廣告功效,
諗住入多部大陸Pajero要黎折殼, 去到鴨記檔主話賣哂淨番檔面果盒, 盒殘都算啦, 殺埋.....
連defender都賣哂....頂

作者: B仔 時間: 2006-5-30 19:52

原帖由 speedstar 於 2006-5-30 19:49 發表
不要看小這裡的廣告功效,
諗住入多部大陸Pajero要黎折殼, 去到鴨記檔主話賣哂淨番檔面果盒, 盒殘都算啦, 殺埋.....
連defender都賣哂....頂

好賣你怕佢吳再入貨咩...哈

作者: peter7 時間: 2006-5-30 21:19
Here is my Lap Liu St. Defender on XC.

作者: txzmxn 時間: 2006-5-30 21:59

原帖由 peter7 於 2006-5-30 09:19 PM 發表
Here is my Lap Liu St. Defender on XC.

啲色唔錯~正!

作者: speedstar 時間: 2006-5-30 23:01

原帖由 peter7 於 2006-5-30 21:19 發表
Here is my Lap Liu St. Defender on XC.

May I have a look of the front?

It seems that the original shell has no head lamp transparent cover, just a light cup & bulb.

作者: speedstar 時間: 2006-5-30 23:03

原帖由 B仔於 2006-5-30 19:52 發表

好賣你怕佢吳再入貨咩...哈

There should be new stock of Defender later. But for the Pajero, there is a newer version and the older version has no more stock if sold out...

作者: mikewu 時間: 2006-5-31 00:13

原帖由 peter7 於 2006-5-30 21:19 發表
Here is my Lap Liu St. Defender on XC.

Brother Peter's workmanship is always the best....
Now, I need to reconsider if I should repaint my Defender before mounting it.......

作者: peter7 時間: 2006-5-31 01:39

原帖由 speedstar 於 2006-5-30 23:01 發表

May I have a look of the front?

It seems that the original shell has no head lamp transparent cover, just a light cup & bulb.

it has cover

作者: speedstar 時間: 2006-6-1 21:33

原帖由 speedstar 於 2006-5-27 00:13 發表
Hello Mikewu,
What do you mean by Landie cover? You mean Land Rover Defender? It is also available in Ap Liu Steet at around $120. An option of dark green or red body color.

By the way, referri ...

Mikewu 兄, I am trying to remove the stickers but want to re-apply the stickers of head lamp and rear lamp later after I spray painted the body. Any idea to remove the stickers but not to damage it for reuse later?

作者: mikewu 時間: 2006-6-1 21:50

原帖由 speedstar 於 2006-6-1 21:33 發表

Mikewu 兄, I am trying to remove the stickers but want to re-apply the stickers of head lamp and rear lamp later after I spray painted the body. Any idea to remove the stickers but not ...

EXCREMELY CAREFUL LAW!!!

Honestly I don't think there is a best way to remove stickers...
Some "See Fu" told me to first heat up the sticker by using hair dryer, then start with the edge and remove it VERY CAREFULLY...........
Honestly don't put too much hope on it dude...... Good luck!

Oh.. make sure you stick it on a clean and removable surface too after you took them out.........

作者: speedstar 時間: 2006-6-1 22:03

原帖由 mikewu 於 2006-6-1 21:50 發表

EXCREMELY CAREFUL LAW!!!
Honestly I don't think there is a best way to remove stickers...
Some "See Fu" told me to first heat up the sticker by using hair dryer, then start with ...

thx...I'll try. The last resort is to scan the removed stickers (or the Tamiya's original stickers) and then print on sticker photo paper..... But I am too lazy or it does not worth the effort spent

作者: mikewu 時間: 2006-6-2 23:45

原帖由 speedstar 於 2006-6-1 22:03 發表

thx...I'll try. The last resort is to scan the removed stickers (or the Tamiya's original stickers) and then print on sticker photo paper..... But I am too lazy or it does not worth the effor ...

Dim ar? How is it turn out??

作者: speedstar 時間: 2006-6-3 00:06

原帖由 mikewu 於 2006-6-2 23:45 發表

Dim ar? How is it turn out??

It works! I used the hair dryer and blew the sticker a while (<10s) and it can be peeled off!
A little bit adhesive residue was left but the sticker itself can still be reused

Bigger sticker may need continuous blowing at removal.

Looks less toy feel....

[ 本帖最後由 speedstar 於 2006-6-3 00:27 編輯 ]

作者: speedstar 時間: 2006-6-3 00:48
By the way, I am looking for decal template of the Pajero Dakar like the Kyosho Overlander

Even a paper model like this one will be fine.
http://www.mitsubishi-motors.co. ... color/pajeroevo.pdf

However no luck up to now

* Photo from Kyosho *

[ 本帖最後由 speedstar 於 2006-6-3 00:49 編輯 ]

作者: mikewu 時間: 2006-6-3 00:51
Hmmm......... That's a little tough...
I do have brand new stickers for the "soft shell" Pajero.... Unfortunately it's now sitting at my friend's house in New York... He suppose to send it to me soon.... I can lend it to you for photo copying.....

作者: mikewu 時間: 2006-6-3 00:53
The stickers are these... (the one at the middle)

作者: speedstar 時間: 2006-6-3 00:54

原帖由 mikewu 於 2006-6-3 00:51 發表
Hmmm......... That's a little tough...
I do have brand new stickers for the "soft shell" Pajero.... Unfortunately it's now sitting at my friend's house in New York... He suppose to se ...

Thanks for your offer.

I have that sticker too but I like paint scheme to true pajero rally more.
I found various templates of Pajero paint schemes on the Internet la.
Now investigate how to produce the decals...

[ 本帖最後由 speedstar 於 2006-6-3 01:49 編輯 ]

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)