RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: EXRUN motor [打印本頁]

作者: chowdee 時間: 2009-2-26 02:48
標題: EXRUN motor
any bro using this motor? i suggested by KWS "枝出" boss. with 電變 cost $530. Tekmodel EXRUN-35A-SL

any comment? good price good deal or i got ripped off?

作者: shouldbe 時間: 2009-2-26 02:55
給以1最快交0<

作者: chowdee 時間: 2009-2-26 03:12

原帖由 shouldbe 於 2009-2-26 02:55 發表

 登錄/註冊後可看大圖

給以1最快交0

i don't understand wor ching...

作者: hardmankam 時間: 2009-2-26 08:15

原帖由 chowdee 於 2009-2-26 02:48 發表

 登錄/註冊後可看大圖

any bro using this motor? i suggested by KWS "枝出" boss. with 電變 cost $530. Tekmodel EXRUN-35A-SL

any comment? good price good deal or i got ripped off?

it is good price for a beginner's brushless esc & motor set.

作者: chowdee 時間: 2009-2-26 11:06
so normally for a more advance level how much would it be?

作者: hardmankam 時間: 2009-2-26 11:18
Beginner ESC Set: Brushless, sensorless ~ $5xx

Novice ESC Set: Brushless, sensored ~ $8xx to $1000

Pro ESC: Brushless sensored ~ $12xx to $17xx (ESC only)
Motor from $400 to $700

作者: chowdee 時間: 2009-2-26 15:27
i see, thx ching!

so the one i got is it a good brand or should i choose another one instead?

作者: hardmankam 時間: 2009-2-26 17:08

原帖由 chowdee 於 2009-2-26 15:27 發表

 登錄/註冊後可看大圖

i see, thx ching!

so the one i got is it a good brand or should i choose another one instead?

Hobbywing is a China brand. They make ESC's for planes, boats and cars.
For about $500, it is very good value!
I bought one set for 8 months, no problems so far.
Only the on/off switch and the fan broke, but both can be replaced.

But of course, if you have a bigger budget, you should get a better ESC.

作者: hardmankam 時間: 2009-2-26 17:24
What kind of car are you playing? touring or buggy?

作者: shouldbe 時間: 2009-2-26 17:41

原帖由 chowdee 於 2009-2-26 03:12 發表

 登錄/註冊後可看大圖

i don't understand wor ching...

sorry,我部腦有問題

只實我只係想話呢個價呢set電子品低用,早前賣成6佰幾銀,我就中招了

作者: EG4MAN 時間: 2009-2-26 18:22

原帖由 shouldbe 於 26-2-2009 17:41 發表

 登錄/註冊後可看大圖

sorry,我部腦有問題
只實我只係想話呢個價呢set電子品低用,早前賣成6佰幾銀,我就中招了

of course, market price reduce cause new ESC is coming.

作者: hardmankam 時間: 2009-2-26 18:32

原帖由 EG4MAN 於 2009-2-26 18:22 發表

 登錄/註冊後可看大圖

of course, market price reduce cause new ESC is coming.

electronics is like this. before plasma 42" tv costs over $50000, now only $20000!

作者: chowdee 時間: 2009-2-27 02:07

原帖由 hardmankam 於 2009-2-26 17:24 發表

 登錄/註冊後可看大圖

What kind of car are you playing? touring or buggy?

oh ching, i'm playing TT01 type E. a beginner. all items were introduced by 枝出 boss. talkative guy...but still not sure if i got ripped off or not....

i still need to get a servo ar...which one is good (value and quality) for a beginner? i got 2PL AM now...

作者: hardmankam 時間: 2009-2-27 14:22
Hobbywing 35A + 13T/9T is good value. This is a good set for TT01.
Don't worry, you didn't get ripped off.

For servo, it all depends on your budget too.
beginner: ~ $100
novice: ~ $300
pro: > $500

For good value, you can look into taiwanese brands.

作者: chowdee 時間: 2009-2-28 00:21
such as? also which shop got the best price? i dun mind going for novice level....coz i know i'm gonna get poisoned soon so probably will upgrade the car instead of parts for TT01...is that a right decision?

作者: hardmankam 時間: 2009-2-28 00:36
if you think u will get poison, its best to get something pass the beginner's stage to save $. here are my suggestions:

Car Kit: New TA05 or a used TRF415 ~ $1200to$1600
ESC + Motor: sensored, ESC can handle about 5.5T, probably 60A unit. ~ $800
Servo: Futaba 9551 ~$550
Controller: Spektrum DX3S is a very good buy for 2.4G. ~$1600
Lipo + Charger ~$500

total around: ~$5000

作者: hardmankam 時間: 2009-2-28 00:39
For the best price, you really have to shop around KWS.
But the shop you mentioned in your 1st post has pretty good price.

作者: chowdee 時間: 2009-2-28 14:41
damn $5k....shiit. i already got some rookie shiit here......well my car still not built up yet, since missing servo...

at this stage i think i should just finish my car and get some grip on this rookie car first....then jump to your suggested level.....

thanks a lot for all these details.....

but for those ESC, servo controller, etc can be reuse for other car or RC toys...so for long term is a good investment...

作者: hardmankam 時間: 2009-2-28 14:58
after you start playing rc as a hobby, $100 is peanuts! haha

for servo, get the futaba/sanwa/ko. you can use these for many years!

作者: hardmankam 時間: 2009-2-28 15:03
i also suggest that even if you are starting on tt01... try NOT to upgrade too much on this chassis since it is still a beginner's line.

next in line, you really should look into a good 2nd hand professional level car like:
HB Cyclone
Tamiya TRF415/TRF416
Xray T2'008/009

of course, buying new is even better if you have budget.

作者: chowdee 時間: 2009-2-28 15:05
haha peanuts...
so i should get 9551 for my TT01? that shop is the best price or somewhere else?

作者: hardmankam 時間: 2009-2-28 15:11

原帖由 chowdee 於 2009-2-28 15:05 發表

 登錄/註冊後可看大圖

haha peanuts...
so i should get 9551 for my TT01? that shop is the best price or somewhere else?

Futaba 9551 is around $520 - $550. you have to shop around for the 'best' price.

A lot of other c-hing also use Hitec. I never tried, but maybe you can ask the store to see if it is good or not. it should be a little cheaper than futaba.

good luck!

作者: hardmankam 時間: 2009-2-28 15:13
futaba 9551 is a good choice.

short profile, fast and strong!

作者: chowdee 時間: 2009-3-2 00:28
how about 9550?

作者: chowdee 時間: 2009-3-2 00:29
just bought a blue bird servo...that shop recommended. 6.2kg + 0.06s for $197 is it good?

作者: hardmankam 時間: 2009-3-2 10:25

原帖由 chowdee 於 2009-3-2 00:29 發表

 登錄/註冊後可看大圖

just bought a blue bird servo...that shop recommended. 6.2kg + 0.06s for $197 is it good?

futaba 9550 is the older model of 9551. but it has discontinued already. it is either used or very old stock.

I have never tried blue bird. the spec is good, price is good. but dont know about quality.

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)