The HOTTEST DRIFT COMBO SET (#CB0179) is now on sale @ rcMart.com for USD $199.90 including the Xpress M-Drift Kit Set plus Yeah Racing Drift Power ESC / Motor Set. This Combo includes:
- Xpress MRR2 Junior Kit
- Drift Tire Set
- Aluminum Solid Axle
- Body Shell
- LED Light Kit Set (Headlight / Taillight / Under Car Light)
- Drift Power 25A Electronic Speed Controller
- Drift Power 12T Motor
- Program Card
An ideal drift car is almost ready by getting this combo and You can also save up to USD $159.90.
Combo Content:
- Xpress (#MRR2-M-DRIFT) MRR2 M-Drift Kit Set
- Yeah Racing (#DM-0001) Drift Power ESC Motor Set
—Original Total USD$358.90
Combo Price Now at USD$199.90
Where to buy? http://www.rcmart.com/catalog/rc-bru...?cPath=293_946作者: Dinballian 時間: 2009-3-2 13:06 標題: Xpress (#XP07-015V5) Steel Universal Shaft New Arrival!! Xpress (#XP07-015V5) Steel Universal Shaft New Arrival!!
XpressXpress (#XP07-015V5) Steel Universal Shaft (BK/SV) for Xpress 1:10 Mini (L/46.5mm) New Arrival!!
Where to buy Xpress Steel Universal Shaft ? http://www.rcmart.com/catalog/advanc...rds=xp07-015v5作者: Dinballian 時間: 2009-3-2 13:16 標題: Yeah Racing RC Car Setting Board On Sale! Yeah Racing RC Car Setting Board On Sale!
# Material: Aluminum
# Size: 420mm(L) x 320(W) x 2mm(H)
# Color: Blue
# Qty: 1Pc
Source: www.YeahRacing.com作者: Dinballian 時間: 2009-3-2 14:31 標題: Hot Power Intelligent Digital Battery Balance Charger/Discharger Hot Power Intelligent Digital Battery Balance Charger/Discharger
Intelligent Digital Battery Balance Charger/Discharger 1-6cell - rcMart Special Edition
Description:
This is the Hot Power Intelligent Digital Battery Balance Charger/Discharger 1-6cell - rcMart Special Edition
Please read the operating manual carefully before use.
Feature:
For: Car/ Boat/ Plane/ Helicopter/ Glow Plug Starter
Material: Aluminum
Color: Black
Specification:
Operation Voltage Range: DC10.0-18.0 V
Circult Power: Max.50W for Charging
Circult Power: Max.5W for Discharging
Charge Current Range: 0.1-5.0A
Discharge Current Range: 0.1-1.0A
Current Drain for Balancing Li-Po: 300mAh/cell
NiCd/NiMH Battery Cell Count: 1-6 Series
Pb Battery Voltage: 2 to 20V
Dimensions: 140X100X300mm
Weight: 400g
Where to buy ? http://www.rcmart.com/catalog/rc-cha...?cPath=52_1271作者: Dinballian 時間: 2009-3-2 14:47 標題: Hop Up Combo Set for Tamiya TT01 by Yeah Racing. Hop Up Combo Set for Tamiya TT01 by Yeah Racing.
This combo is super value, & now in discount!
The Team Sorex competition 32R / 36R slick tire has been restocked @ rcMart.com!!
Competition 32R Slick Tire (#CO-32R)
- width: 24mm
-TEAM SOREX 32R IS AWSOME TIRE ON ASPHALT. MINIMAL TIRE WEAR. NO NEED TO EVEN SPRAY SODA ON THE TRACK FOR THEM TO WORK. TRACK TEMPERATURE FROM 81 TO 96 DEGREES. GREAT USE FOR NITRO CARS.
Competition 36R Slick Tire (#CO-36R)
- width: 24mm
-TEAM SOREX 36R IS A AWSOME TIRE FOR HIGH HEAT TRACKS. THE TIRE PERFORMANCE AND DURABILITY, IS WHAT MAKES THIS TIRE ONE OF THE BEST ON THE MARKET. TRACK TEMPERTURE 96TO 151+DEGREES. NITRO CARS LOVES THE 36R DUE TO THE LENGTH OF THE MAINS EVENTS, THE TIRE PERFORMANCE AND WEAR FACTOR WORKS IN THERE FAVOR.
Where to Buy? http://www.rcmart.com/catalog/advanc...&keywords=co-3作者: Dinballian 時間: 2009-3-3 19:18 標題: Yeah Racing F1 Alu. Knuckle Arm & Servo Saver Set Arrival! Yeah Racing F1 Alu. Knuckle Arm & Servo Saver Set Arrival!
The Yeah Racing (#F103RM-006BK) Aluminum Knuckle Arm & Servo Saver Set (1,2,3 deg) (BK) for Tamiya F103RM is JUST ARRIVED. This Aluminum Knuckle Arm & Servo Saver Set aims at improving the performance of the F1 chassis by introducing various adjustable setting functions:
1. The camber could be set in 3 different angles (-1°, -2°, -3°) with the installation of the 3 particular camber uprights included in the Yeah Racing Aluminum Knuckle Arm & Servo Saver Set.
Setting Tips
<-1°,-2°&-3° Camber>
Camber affects the car’s traction. Generally more negative (inward) camber means increased grip since the side-traction of the wheel increases.
Adjust front camber so that the front tires wear flat.
2. The length of the Aluminum Front Knuckle Arm is adjustable in order to set up different toe-in and toe-out angles of the wheel.
Setting Tips
Increased (more toe-in)
• Increases understeer (decreases oversteer).
• Decreases steering at corner entry.
• Increases “nervousness.”
• Makes car more difficult to drive.
Decreased (more toe-out)
• Decreases understeer (increases oversteer).
• Increases steering at corner entry.
• Increases straight-line stability.
• Makes car easier to drive.
3. An extra O-Ring would adjust the chassis in a higher or lower height.
*Picture demonstrating the chassis in different height by adjusting the O-ring.
Furthermore, the Yeah Racing Knuckle Arm is made of black aluminum which light weight the chassis. The specific designed servo saver enhances the strength of the chassis. This feature also increases the strength of holding up the saver to provide a more accurate turn angle in cornering. With this stylishly designed Upright Set, the F1 chassis looks more outstanding, compared with other similar products in the market.
Please keep watching the latest news from rc-rss.com or yeahracing.com.
Please keep updating the latest news from rc-rss.com or yeahracing.com.
Yeah Racing (#F103RM-006BK) Aluminum Knuckle Arm & Servo Saver Set for RC Formula One
The Yeah Racing Ultimate Brainpower 35A / 60A ESC & Program Card are In-Stock now @ rcMart.com!!
The 35A ESC and the Program Card has restocked also with a Brand New 60A ESC!
The Ultimate Brainpower ESC and Program Card are very popular in the RC market now, get them quick before they’ve been sold out again!!
*Yeah Racing (#BM-0011) Program Card for Car http://www.rcmart.com/catalog/rc-bru...cPath=293_1021作者: Dinballian 時間: 2009-3-4 17:57 標題: Yeah Racing Multi-Purpose Mini-Box New Arrival!! Yeah Racing Multi-Purpose Mini-Box New Arrival!!
Yeah Racing Multi-Purpose Mini-Box (With Fixed Partitions)
Description:
This Yeah Racing Multi-Purpose Mini-Box (with Fixed Partitions) have two Size (M & L). Easy to storage your Miscellaneous RC tool
Feature:
For: Miscellaneous
Material: Plastic
Color: Transparent White
Specification:
Multi-Purpose Mini-Box (M) Size (#YA-0189) : Approx. L194 x W 135 x H 45mm
Multi-Purpose Mini-Box (L) Size (#YA-0190) : Approx. L 242 x W 168 x H 55mm
Include:
Multi-Purpose Mini-Box (1 Pc)
Yeah Racing Decal (1 Pc)
Alloy Rotor Set For Esky LAMA V3,V4,R22
E-Sky series of RC mini-helicoptors is a fun RC toys for all ages! But, everybody almost got the same kit, so how to outweight yours? If it’s your question, E-Sky RC pilots listen, introducing you a sophisticated alloy Rotor hop ups set made by Yeah Racing specially for Esky Lama V3, V4 & R22! It is made of hard and light aluminium alloy by precision CNC machines. Highly strengthen the harness of the rotor, and, most importantly, have an attractive apperance!
Looking for a quality Rock Crawler Motor?? Team Atlas Rock Climber Stock Motor definately is one of your best choice! It ranges from 40T to 100T to sute your different need!
Team Atlas Rock Climber Stock Motor
40T 11,000rpm
50T 9,570rpm
60T 8,030rpm
70T 6,700rpm
80T 5,940rpm
90T 4,730rpm
100T 3,850rpm
Where to get the Team Atlas Rock Climber / Rock Crawler Stock RC Motor ? http://www.rcmart.com/catalog/team-atlas-m-85.html作者: Dinballian 時間: 2009-3-9 13:06 標題: Tamiya Transpeed Motor + ESC / 12T Motor Set New Arrival! Tamiya Transpeed Motor + ESC / 12T Motor Set New Arrival!
The Brand New Tamiya Transpeed Brushless Motor has arrived rcMart.com.
The high performance motor which actualizes maintenance free with the brushless system. Adopting the thin t draw tar which uses the neodymium magnet. Equipping the slim type cooling front cover.
As for ★3.5T for on road
As for ★6.5T and 7.5T for off road.
High torque output is achieved by using the latest Neodymium magnet sintered rotor technology. Size 540.
rcMart.com had the new Tamiya TBLM-01 12T Brushless Motor and the TBLE-01 Brushless ESC 01
Brushless motor and is being touted as the next generation power sources. By placing a magnet on the inside of MOTAKAN, motor brushes are now equipped with a brush to change the direction of electricity flow through the rotor coils wrapped. The brushless motor is placed inside the coil MOTAKAN, the rotor is equipped with a magnet. The speed controller (ESC) and change the direction of electricity flow through the coil built into the electronic circuitry. It does not have to brush supplies, essentially maintenance free. Moreover, there is no point of contact, such as electrical and mechanical brush KOMYUTETA and low noise so that no spark, also features a high-speed rotation possible.
Tamiya brushless motor set 01 12T ESC01
Item No: 45039 RC System Series No.39
Brushless motor, brushless motor and a dedicated 01 12T Tamiya ESC (speed controller) has been included. 01 is a brushless motor, 23T corresponds to the motor brushes. ESC01, PURISETTOPUROFIRU addition to five types of brake output stages 10, 10 can be configured individually and NYUTORARUBUREKI output stage. Temperature, over-current, low voltage circuit with three types of protection. NIKADO power, as well as nickel-metal hydride and lithium-ion battery.
[The challenge of the isolated] now RC race car - square off Super GT’s GT500 class works. Meanwhile, more than 20 machines crush the GT300 is a battleground state in the privateer class. Among a variety of machines, the only rotary engine as the car fought the 2008 season, ORC Amemiya SGC-7 electric RC car assembly kit. Mazda RX-7 to reproduce the full realization in the form of polycarbonate finish the race car base. Chassis in which the Board FURONTOSASU, upright motor shaft drive 4WD of the TB-03. The sharp run-bodied and is a real RC cars make the race.
[SUETA a race against four wheel drive shaft, TB-03 chassis] adopted motor shaft drive chassis is a standard upright Parts 4WD Race for the basic TB-03. BASUTABUFUREMU high dust and mold with a low center of gravity to MOTAKURINGUDAKUTO. The propeller shaft of the split type and high efficiency, with around a ball differential. Seek further efficiency and drive, also achieved a good improvement. INBODOTAIPU the front suspension and four-wheel DABURUUISSHUBON. Furthermore, SHOTORIBASHIBURUSASUAMU, TRF416 PYUARESA use around the upright. HAIPOTENSHARUSHASHI is incorporating expertise from throughout the combat.
Basic Specifications
Overall length: 459mm
Width 191mm, height 110m
body weight 1077g
Wheelbase: 257mm
Tread with around 165mm
Motor = RS540 type
Drive system = vertical position motor drive shaft 4WD
system DEFUGIYA F / R both
ball differential
SUTEARINGUTAIRODDO = 3-part Suspension
F / R co = DABURUUISSHUBON
Damper = F / R CVA co OIRUDANPASUPAMINI
GIYARESHIO = 7.09: 1
tires = F / R both width / diameter 24mm / 64mm
speed controller = ESC specification
Tamiya (#58419) 1:10 TT-01D NISMO R34 GT-R Z-Tune W/ESC EP
The world famous Nissan NISMO R34 GT-R Z-Tune now comes loaded on the impressive drift spec TT-01D chassis and is just waiting for you to drift it around the track.
~Based on the lightweight and user-friendly TT-01 chassis for effortless assembly.
~4WD shaft driven bathtub chassis with coil spring damped, 4-wheel independent double wishbone suspension and sealed front and rear differential gearbox.
~Drift-spec modifications include special suspension tuning, full ball bearings, sport-tuned motor, aluminum heat sink, CVA mini shock dampers and short springs and adjustable upper arms.
~Polycarbonate body captures the GT-R’s beautiful shape including parts such as the front and rear fenders, wing, and the hood’s air outlet.
~Super Driftech tires are made from resin and rubber compound specially designed for long-lasting drift action.
~Includes Electronic Speed Controller (TEU-101 BK) and RS-540 Sport Tuned Motor.
~Includes LED Light Unit (TLU-01) and 2 x white LED’s (Front) and 2 x red LED’s (Rear).
~Add separately available LED lights for a greater sense of realism.
~Add Tamiya LED Light Control Unit (TLU-02) Item 53937 for more control of light operations.
~Wide variety of tune-up parts are separately available to further customize your machine.
~2-channel R/C system, 7.2V battery and charger separately required.
Source : Tamiya
Translation from Tamiya
[The regulation] KARERAKAPPUJAPAN in his own world PORUSHEKARERAKAPPU eight are held by countries and regions worldwide places. Held in Japan from 2008 to KARERAKAPPUJAPAN sponsored by KRH race, driving his players by Isao Yoshinari already assembled kit of the Team KTR RAJIOKONTORORUKA reproduce the electric car. The full body modeling experience is a unique form of polycarbonate. KI MEMASU door mirrors and rear wing is available in detail the different parts. Also, the set of marked with stickers and coloring GARIMASU easily. In addition, the headlight 2 light (white), two tail lights (red) high brightness LED light you can enjoy the set.
[Shaft 4WD, TT-01 TYPE-E Chassis] is adopted, the 4WD MOTA・SHAFUTODORAIBU Vertical TT-01 TYPE-E. To the mainframe of bathtub type, and ensure high rigidity chassis, gear and equipment to cover the upper deck of a glass fiber reinforced nylon plastic. Steering system is smooth-moving 3-division play less. Design and low center of gravity and good balance DABURUUISSHUBONSASUPENSHON four-wheel, combined with equipment and DEFUGIYA around to demonstrate the characteristics of a steering controller Bull. The black mesh wheels good, RESHINGUSURIKKUTAIYA set.
Basic Specifications
Overall length: 465mm
Width 195mm
height 134mm
Wheelbase: 251mm
Tire Width / diameter = FR 27/67mm both
Frame = bathtub type motor drive system
SHAFUTODORAIBUFURUTAIMU Vertical = 4WD
3-Tie Rod Steering
suspension = 4 DABURUUISSHUBON split ring around Damper
friction with gear ratio = 8.35:1
Motor = 540 type
speed controller = ESC specification
Translation from ABC Hobby :
Z now continue the history of the origin of all that here.
40 also appeared to look after the current year, the styling also feels a speck old. The reason is, Z is nothing else to ITA styling and the ultimate already appeared at the time. The first S30 Fairlady Z faithfully reproduced with the ultimate styling of the 1 / 10 M-Chassis Nissan Fairlady Z, a legendary life of 1 / 10 to be indoctrinated in the world of M-Chassis !
ABC’s new-generation technology hobby, 3DCAD CG body in shape and full HAIDIFINISHONDEKARU, fully reproduce the fine detail from the body shape! The emblem is a version of both domestic and export several versions, is equipped with rear SAIDORIFUREKUTA included only export specifications. This Z Z432 240Z DATSUN240Z (export version) can be reproduced.
Body Clear Body and unpainted state, in your favorite color to paint with Z can work out! Shimo Makoto Akira Makoto to reproduce the colors of the time, Shimo Makoto modern finish in custom colors, and expand the imagination excited.
Fairlady Z to support the drive chassis has been made in the design of high-performance JENETIKKUSHASHI low center of gravity. A reputation of stability and driving JENETIKKUSHASHI, tells us the depth of the back of the drive and enjoyment of RAJIKON from beginner to advanced.
■ Nissan Fair Lady Z (S30) KURIABODIDETA
Overall length / Length: 382mm
Width / Width: 160mm
Foil-based / WheelBase: 208mm
Accessories: Light-only cover masking film decals
With: Decal. Masking Film. Light Bucket
Fair Lady Z (S30) 1969-1978
Fair Lady Z,Japan’s first sports car that was made shortly after the war’s DATTOSANSUPOTSU DC-3 (1952), dating back to the. 1954 Auto Show was first held in Japan (Tokyo Motor Show today), which was exhibited in the car, gave a big impact in those days was a dream car for people to say things. The planning for this show, the Z man after he called the American Automobile Hall of Fame father’s car, it’s Mr. K, Katayama Yutaka was.
At the time, Katayama was enrolled in Public Relations Division of the Nissan had a vision. The判RI to appeal to the masses more attractive not only sports car of the car. Sports car design is beautiful in the wild win the hearts of the masses in the period of time. Demand for the automotive industry and the need to educate the public. Era, it was not important and what is public relations, but has continued to practice and learn it faster than anyone else. The first domestic sports, racing and winning the rally, Fair Lady Z and development …
Katayama was at the time president of Nissan North America, was promoted in newspaper ads as Z.
This is a special racing car. We are a sports car for you,
Long drive reliability to withstand the harsh Americas huge trunks full pace, good gas mileage, low prices … beautiful design and it seems everyone is watching. They filled a real sports car, Fairlady Z, the realization that hold a variety of ideas and efforts. Production vehicles diverted from other parts to most of the low cost, Cedric the old design was to focus on venture-maintenance and durability than the peak performance of L-type engine. This choice is cheap and accessible, reliable and durable parts, and the benefits created, 40 have emerged as one of the individual factors are still relatively good condition after a year.
Was pumped at a low price below half of Porsche and Z is a huge hit record and release more than imagination. The initial production was scheduled at the peak with 10 more than the order was unusual and popular vehicles waiting up to six months. China even more success in a spectacular race car, MG and Triumph boasts wins against the Porsche sports car in the world and said, his DATTOSAN (Nissan North America) and of a strong brand image.
Fair Lady Z S30-1969 from the 1978 debut of the S130, like between FURUMODERUCHENJI was added to the type of models.
Skyline GT-R (KPGC10) of the S20 engine to race officials and some of the Z432 and A sold-class license holder only Z432R (regular Z432 acrylic glass in a close up of the body than have made necessary 80kg lighter), the North America version 2.4 was released in Japan a liter 240Z, and G-equipped nose 240ZG, added a back seat body stretched 2by2. 9 years and over the long term Total sales worldwide production continues to be his amazing numbers, 55 million say.
Once the flow ceased Fair Lady Z 2002, playing as a symbol of Nissan’s Carlos Ghosn, CEO of the stunning revival under a new regime. And in 2008, the latest Z34 model appeared. The design of the original Z33 Z was thinking more massive than the compact . Wild styling appeal to the emotions of the people, not designed to show off the mechanical performance, as a foot of daily RERE SUPOTSUDORAIBINGU If the answer to that whip, price and easy to reach by hand … the spirit of the Z, be immortal now.
Translation from HPI
And those RIARUSUKERUBODI 1 / 10 RITORUSUPOTSUSHASHI package. Cup racers, HPI was fused with a high level of performance and cool stick. Full-time 4WD drive system chassis, FRP double deck structure, specification aluminum center shaft HAISUPEKKU adoption. Choose to match the body with two of the 210mm and 225mm FURONTOSHOKKUREIAUTO and also features adjustable wheelbase and I am happy to pick and choose. With the body, and pursue the reality of the body to adopt PURAPATSU.
Ultimate Scale Realism
Cup racers and TOURUTENSUKERU concept of “the most realistic RC model car looks great.” HPI technical designers the world body, will gather strength design, as reproduced in the real TOURUTENRUKKUSU. Cup racers are not only focused on the performance scale model, width, length, SHIMA{banned}A to vehicle dimensions and infinite detail.
Authentic Detailing
TOURUTENSHIRIZU attention to design detail than ever before. Polycarbonate body is a faithful reproduction of the vehicle body lines and curves. Door line, trunk, side skirts, like vehicle. Wipers, bumper, muffler, mirror our reality and reproduction parts.
Ready to Perform
Cup racer chassis is not simply aimed at TOURUTENSUKERU, our driving performance. Equipped with an oil shock in the standard kit, each linkage FURUAJASUTABURUTAIPU adopted. FURONTOGIYADEFU, high stability in the adoption of RIABORUDEFU.
Cup racers easy handling, ease of assembly, of course, the design KODAWARIMA{banned}A. Grid and lightweight, battery holders, improving the cooling performance, and streamlined to the maximum of MEINSHASHI scale RC car that has been eagerly-awaited completion.
Where to buy ?
HPI (#100600) 1:10 Cup Racer 1M/ Datsun 240Z Mini EP http://www.rcmart.com/catalog/rc-100...cPath=420_1174
DRIFT Version
Cup racing is not just GURIPPUBAJON lineup drift version. Sale of T-DRIFT enjoy traveling with a drift to the drift-only tire and tire using the same compound.
Where to buy ?
DRIFT Version~~Coming Soon
Source : HPI作者: Dinballian 時間: 2009-3-11 13:13 標題: Yeah Racing Ultimate Brainpower ESC / Motor Set Restocked! Yeah Racing Ultimate Brainpower ESC / Motor Set Restocked!
Yeah Racing would like to THANK all of the Ultimate Brainpower ESC, Motor and Program Card supporter by choosing their products. Most of the Ultimate Brainpower ESC and Motor has been restocked. Also, with a brand new (#BM-0015) 35A ESC and 13T Motor combo set.
The following Yeah Racing Ultimate Brainpower items has been restocked:
- Yeah Racing (#BM-0004) Ultimate Brainpower ESC 35A & 10T Sensorless Brushless Motor Set
- Yeah Racing (#BM-0007) Ultimate Brainpower 9T Sensorless Brushless Motor
- Yeah Racing (#BM-0008) Ultimate Brainpower 10T Sensorless Brushless Motor
- Yeah Racing (#BM-0010) Ultimate Brainpower 13T Sensorless Brushless Motor
- Yeah Racing (#BM-0012) Ultimate Brainpower ESC 35A & 9T Sensorless Brushless Motor Set
- Yeah Racing (#BM-0015) Ultimate Brainpower ESC 35A & 13T Sensorless Brushless Motor Set
Axial Scorpion AX10 Rock Crawler RTR (#AX90002) and ARTR (#AX90004) are back in stock now!! And the brand new SCX 10 (#AX90007) which going to arrive very soon @ rcMart.com!
Please be hurry, stock limited!
Where to buy? http://www.rcmart.com/catalog/axial-m-309.html作者: Dinballian 時間: 2009-3-11 14:40 標題: Yeah Racing Tornado High Speed Cooling Fan Just Arrived! Yeah Racing Tornado High Speed Cooling Fan Just Arrived!
Yeah Racing (#YA-0180) Tornado Cooling Fan (30×30x10mm) has arrived!!
Need something more powerful than your existing motor / ESC fan? This is exactly the cooling fan for you.
Yeah Racing Tornado Cooling Fan has Ultra High Speed. You need unmatched performance that this fan delivers. This dual ball bearing fan flows up to 100% more air than other similar Fan.
Specification
Dimensions: 30 x 30 x 10mm
Bearing: Dual Ball Bearing
Operating: Voltage 5V
Start-up Voltage: 3V
Power: 1.40W
Fan Speed: 14000 R.P.M (±20%) at 25℃, after 3 min. rotating.
Max Air Flow: 5.501CFM
Current: 0.28A
Weight: 9.0g
Connector: JST
Source: yeahracing作者: Dinballian 時間: 2009-3-11 15:42 標題: BOL Super Cool RC Battery Heat Sink On Sale BOL Super Cool RC Battery Heat Sink On Sale
For Better Maintainance of your RC battery, BOL super Cool heat sink is your best pal! It helps cooling down your battery during charging or after race! Your battery can last longer at high performance! You may use it also as car stand to cool down your rc car after race! Good news, rcmart has it now at discounted price!
http://www.youtube.com/watch?v=O3oGh...oltage-reader/作者: Dinballian 時間: 2009-3-12 12:54 標題: Traxxas R/C model parts for monster truck arrived rcMart.com! Traxxas R/C model parts for monster truck arrived rcMart.com!
TRAXXAS R/C model parts for monster truck (REVO, SLAYER, SLASH, TRX 3.3) has just arrived rcMart.com! Please check the list below for your desired Traxxas parts:
For REVO
- Traxxas (#3953) Spur Gear 1.0P 36T For Revo / Slayer
- Traxxas (#3959) Spur Gear, 62-Tooth
- Traxxas (#3961) Spur Gear, 68-Tooth
- Traxxas (#4686) Original Spur Gear (48P 86T)
- Traxxas (#3232X) Super Duty Long Glow Plug For Revo
- Traxxas (#5314) Front & Rear Body Mounts w/Posts & Pins For Revo
- Traxxas (#5330) Front Bulkhead For Revo
- Traxxas (#5340) Aluminum Exhaust Header Silver Anodized For Revo
- Traxxas (#5344X) Heavy Duty Servo Saver Spring For Revo / Slayer
For Slayer
- Traxxas (#3953) Spur Gear 1.0P 36T For Revo / Slayer
- Traxxas (#5344X) Heavy Duty Servo Saver Spring For Revo / Slayer
- Traxxas (#5345X) Steering/Throttle Servo Horns
- Traxxas (#5941) Shock Spring (2.0 rate double black stripe) For Slayer
- Traxxas (#5462) Traxxas GTR Shock Rebuild Kit
- Traxxas (#5465) GTR Shock Caps and Spring Retainers
- Traxxas (#5931) Upper & Lower Suspension Arms (Right Front) For Slayer
- Traxxas (#5932) Upper & Lower Suspension Arms (Left Front) For Slayer
- Traxxas (#5933) Upper & Lower Suspension Arms (Right Rear) For Slayer
- Traxxas (#5934) Upper & Lower Suspension Arms (Left Rear) For Slayer
For Slayer (5908) / REVO (5308)
- Traxxas (#5145) Screw Pin 4×15mm
- Traxxas (#5456) Half Shafts Center For Revo
- Traxxas (#5457) Yoke Brake w/Pins For Revo
- Traxxas (#5458X) Yokes, Differential and Transmission
For EZ-Start
- Traxxas (#5270R) EZ Start 2 Electric Starting System
- Traxxas (#5279) Motor/Pinion Gear/Motor Brush EZ Start 2
- Traxxas (#5211R) Roller Clutch T-Maxx 2.5
For TRX 3.3
- Traxxas (#5224) Connecting Rod (TRX 2.5, 2.5R, 3.3)
- Traxxas (#5291) Wrist Pin/Clips (TRX 3.3)
- Traxxas (#5292) Gaskets Cooling Head (TRX 3.3)
For Slash
- Traxxas (#1918) Alloy Motor Pinion Gear (48P 18T)
#380291 Electric Pack inlcuded US$299.90 US$249.90
#380200 Electric Pack NOT included US$249.90 US$199.90
Features : -
With 0.8cc Engine & Muffler
1/18 professional 4WD shaft-drive nitro micro car
High competition micro car with highest performance
Racing characteristics of 1/10 touring cars
Ultra low center-of-gravity (CG)
Maximum drivetrain efficiency
Drivetrain includes 22 ball bearings for maximum efficiency and speed
Fully independent front and rear suspension
Front and rear gear differentials
Adjustable shock position for damping adjustment
Coil-over shocks for precise chassis handling
Adjustable body posts
Uses standard 150mm micro bodies
Uses standard micro wheels and tires
Standard or micro electronics
Specifications
Length: 241mm
Wheelbase: 150mm
Front Width: 98-101mm
Rear Width: 104-107mm
Camber: Preset -1* Front & Rear
Front Toe: Out .5* (Adjustable Option)
Rear Toe: In 4* (Adjustable Option)
Downstops: Adjustable Front & Rear
Ride Height: 3-4mm
Running Weight: Approx 530g
Chassis: Swiss T6 7075 CNC Machined Chassis
Differentials: Gear Type Front & Rear
Ball Bearings: 22
Brake: Laser Cut, Hand Ground
Brake Pads: Ferodo
Drivetrain: 4WD Aluminum Shaft
Shocks: Adjustable Position, Coil Over
Suspension: Independant Double Wishbone
Tires: Pre-Mounted Foam
Xray NT18 0.5cc Engine Specifications
Standard Model Car Fuel
Standard Glow Plugs
Durable Construction
Large, Billet, Blue Anodized aluminum Heatsink
Slide Carburetor w/ Dual Needle
2 Shoe Aluminum Clutch
Polished Muffler
HUDY Steel 23T Clutch Bell
Included : -
Set of foam tires premounted on XRAY micro wheels
1/18 Micro body 150mm
Front foam bumper
BONUS: Hudy 3.0mm screwdriver for kit assembly
NT18 Kit
Engine
Miffler
#380291 - Electric Pack INCLUDED (2xMetal Gear Servo, Receiver Battery Pack)
#380200 - Electric Pack NOT included
Have you ever find your RC tires mess up? Topcad’s Tire bag can help? Made by Nylon, it can keep 1/10 Tire for the width up to 28mm. Five colors available, Blue, Pink, Black, Silver & burgendy. Retail price at US$3.5 & rcmart now has it on discount! Click the links below to get one!
Traxxas 2009 Brand New Monster Truck, SUMMIT and E-REVO (Brushless Edition) arrived rcMart.com. Stock Limited of this 2 Brand New Traxxas Trucks, be hurry to get them now @ rcMart.com!!
Traxxas (#5610) Summit 1/10 Scale 4WD Extreme Terrain Monster Truck Features:
* Waterproof electronics for running in water, mud, and snow
* EVX-2™ 16.8-volt FWD/REV electronic speed control with patent pending Training Mode™
* Traxxas high-torque Titan® 775 motor
* Traxxas TQ-4™ 27MHz AM transmitter and 4-channel micro receiver
* Innovative T-Lock™ remote locking differentials let you select front and rear locked diffs, front locked diff, or full open differentials via the transmitter
* Transmitter-operated High-Low transmission switches from a 70:1 low-range ratio for climbing torque to a 25:1 high-range ratio for trail speed
* 10-LED lighting system opens the door to night-driving fun
* ExoCage™ body adds real rock-rig style and functional protection
* New 3.8″ Geode™ wheels with beadlock-style sidewall protectors mount securely to aluminum 17mm hex hubs
* Massive 7″ Canyon AT™ extreme-terrain tires with soft inserts generate awesome off-road grip
* Unique chassis design with integrated dual battery compartments
* Quick release battery doors
* Battery cooling vents
* Scalable battery compartments
* Smooth center skid plate shields the driveline
* Sealed receiver box protects the micro receiver from dirt, debris, and moisture
* Dual digital waterproof steering servos deliver a combined 250 oz-in of torque & 0.16-sec transit time
* Hard-anodized, Teflon®-coated shock bodies with TiN coated shock shafts
* Sealed pivot ball suspension
* Sealed limited slip T-Lock™ (remote locking) differentials
* Ball-bearing-supported steering servo system with integrated servo saver
* Hex hardware throughout
* Compatible with many Revo® accessory upgrades
* Traxxas innovation built in!
* Ready-To-Drive®
Traxxas (#5608) E_REVO 1/10 Scale 4WD Brushless Monster Truck Features:
* Castle Creations Mamba Monster ESC
* Castle Creations Mamba Monster 2200KV Motor
* Traxxas TQ 2.4GHz Radio
* Brushless transmission with metal center idler gear
* Heavy-duty 17mm splined aluminum hex hubs and wheel nuts
* Unique chassis design with integrated dual battery compartments
* Quick release battery doors
* Battery cooling vents
* Scalable battery compartments from sport packs to brutal 6S LiPo power
* Smooth center skid plate shields the driveline
* Sealed receiver box protects the micro receiver from dirt, debris and moisture
* Dual digital waterproof steering servos deliver 125 oz-in of torque & 0.16-sec transit time
* Hard-anodized Teflon®-coated shock bodies with TiN coated shock shafts
* Sealed pivot ball suspension
* Sealed limited slip differentials
* Dual-servo steering system
* Hex hardware throughout
* 3.8” black chrome Gemini™ wheels
* 3.8” Talon™ tires
* Sleek pre-painted body design
* Adjustable rear wing
* Compatible with many Revo® Platinum upgrades
* Traxxas innovation built in!
* Ready-To-Race®
Where to buy? http://www.rcmart.com/catalog/kits-t...id=312&sort=1a作者: Dinballian 時間: 2009-3-17 16:50 標題: Tamiya (#42139) TRF511 1:10 EP Offroad Chassis Kit Arrived! Tamiya (#42139) TRF511 1:10 EP Offroad Chassis Kit Arrived!
The Tamiya (#42139) TRF511 1:10 4WD EP Offroad Chassis Kit just Arrived rcMart.com!
Be the first to get this Brand New Car Kit during the HOT SALE period NOW!!
Features:
Although it follows the same general layout as the TRF501X, almost every part has been newly designed, making it lighter also improving ease of maintenance.
Thanks to the data taken from actual races, the suspension arms have been redesigned for improved performance.
The new drivebelts are stronger, more durable, and substantially reduces drive resistance.
Equipped is an upper/lower separate type center bulkhead which improves motor removal and installation efficiency as well as spur gear and pinion gear clearance setting adjustments.
New battery position improves the machine’s weight balance as well as jumping and landing characteristics.
The suspension’s new geometry guarantees greater stability and better turning performance.
Battery pack & charger, ESC, body, chassis cover, rear wing, tires, and 2-channel R/C system separately required.
A wide range of Grade-Up parts are available for further customizing your machine.
The images below for references only:
The Tamiya (#58420) TB-03D 1:10 EP 4WD Drift Spec. Chassis Kit is now back in stick @ rcMart.com. The TB-03D one of the most popular drift car for RC Drifter. Not having one yet? It is the opportunity now to get one before the TB-03D sold out again~~~
Description:
Sharp and precise of drifting can be experienced through this TB-03D shaft driven 4WD chassis kit. The front damper stay has been changed and is equipped with a normal type suspension system. Comes with 18 spoke black metal plated wheels with Super Driftech Tires! Furthermore the body is ready for you to customize with a rich assortment of Hop Up and drift specific parts. This is the chassis to have for all you drift fans out there!
RC 1:10, Car, Electric-Powered, On Road
Feature:
New design H Parts (Mirror, Wiper).
New design J Parts (Exhaust, Intercooler, Brake disc-shaped wheel hub).
New design N Parts (Suspension mount).
Short reversible suspension.
1050 Bearing Uprights (F/R).
Super drifttech tires (24mm width) included.
The Photos Below for Your Reference Only.
The Body is not included.
Source: Tamiya作者: Dinballian 時間: 2009-3-17 17:26 標題: Yeah Racing Motor Mount for F103RM coming soon Yeah Racing Motor Mount for F103RM coming soon
Yeah Racing New & Unique Design Hop Ups Parts
For F1 Formula RC Car!!
Yeah Racing will soon launch their highly developed hop ups parts for RC Formula One. The specific designed hop ups part are aiming to increases the strength of the F1 chassis, and there are number of optional adjustment for advance setting to improve the F1 Car performance on the track, in different conditions. The hop ups shown below are already down to the production line and will be released soon. Please keep updating the latest news from rc-rss.com or yeahracing.com.
Hellipro full series lithium polymer li-po rc batteries packs for Align, e-Flite, Thunder Tiger, Mikado & Esky helicopters. Experience the super heli-power, Hellipro is your only choice!
Item No.: #HP-28459 #HP-28460 #HP-28014 #HP-27916
Capacity (mah): 2500 mah 2500 mah 850 mah 850 mah
Connection 6S1P 3S1P 3S1P 2S1P
Weight (g): 420 g 210 g 69 g 45 g
Voltage (V): 22.2 V 11.1 V 11.1 V 7.4 V
Dimension (mm): 118 x 50 x 34.5 115 x 34 x 25 58 x 30 x 22 13 x 26 x 68
Continuous Discharge Rate: 25 C 25 C 20 C 15 C
Burst Discharge Rate: 40 C 40 C 35 C 30 C
Usage: Align T-Rex 500
Mikado Logo 400 Align T-rex 450
Thunder Tiger
Titan E325 Align T-Rex 250 e-Flite Blade CX2
Twister Hawk
Details:
Item No.: #HP-25737 #HP-25736 #HP-25735 #HP-25734
Capacity (mah): 2200 mah 1200 mah 1000 mah 850 mah
Connection 3S1P 3S1P 3S1P 2S1P
Weight (g): 175 g 105 g 78 g 43 g
Voltage (V): 11.1 V 11.1 V 11.1 V 7.4 V
Dimension (mm): 108 x 34.5 x 23 69 x 35.5 x 21 66 x 35.5 x 19.5 55 x 30 x 15
Continuous Discharge Rate: 25 C 25 C 15 C 15 C
Burst Discharge Rate: 40 C 35 C 25 C 25 C
Usage: Align T-Rex 450
Esky Honey Bee
Belt-CP Esky Honey Bee
King II Esky Honey Bee
FP & CP Esky LAMA
V3, V4, R22
Manufacturer: Hellipro
Where to Buy Hellipro Lithium Polymer (Li-Po) RC flight/ helicopter Battery Products? http://www.rcmart.com/catalog/hellipro-m-304.html作者: Dinballian 時間: 2009-3-20 12:06 標題: Hellipro Li-Po battery for Align T-Rex 450 & Titan E325 Hellipro Li-Po battery for Align T-Rex 450 & Titan E325
Hellipro will soon release a new lithum polymer battery packs for Align T-Rex 450 Helicopter & Thunder Tiger Titan E325. Capacity at 2500mah, Continuous Discharge Rate at 25C & Burst discharge rate at 40C.
More Info about Hellipro Battery http://www.rcmart.com/catalog/newsde...ewsdesk_id=435作者: Dinballian 時間: 2009-3-20 12:06 標題: Hellipro Li-Po battery for Align T-Rex 450 & Titan E325 Hellipro Li-Po battery for Align T-Rex 450 & Titan E325
Hellipro will soon release a new lithum polymer battery packs for Align T-Rex 450 Helicopter & Thunder Tiger Titan E325. Capacity at 2500mah, Continuous Discharge Rate at 25C & Burst discharge rate at 40C.
More Info about Hellipro Battery http://www.rcmart.com/catalog/newsde...ewsdesk_id=435作者: Dinballian 時間: 2009-3-20 12:34 標題: Hellipro Li-Po RC battery for Align T-Rex 500 & Mikado Logo Hellipro Li-Po RC battery for Align T-Rex 500 & Mikado Logo
Hellipro will soon release a new lithum polymer battery packs for Align T-Rex 500 Helicopter & Mikado Logo 400. Capacity at 2500mah, Continuous Discharge Rate at 25C & Burst discharge rate at 40C.
More Info about Hellipro Battery http://www.rcmart.com/catalog/newsde...ewsdesk_id=435作者: Dinballian 時間: 2009-3-20 12:41 標題: Full Range of Traxxas 4WD Monster Trucks @ rcMart.com Full Range of Traxxas 4WD Monster Trucks @ rcMart.com
Traxxas has grown to become the number-1 selling name in RTR (Ready To Run) nitro and electric models for the last 4 years running. No one has done more than Traxxas to advance the RTR (Ready To Run) category with innovative thinking and fun designs that make it easy for anyone to get started in the great R/C hobby.
rcMart is the EXCLUSIVE Traxxas’s distributor in HONG KONG
All Brand New Traxxas’s RC products (Car Kit & Parts) has arrived the rcMart’s stock. Please keep an eye on www.rcmart.com for the latest Traxxas products.
Where to buy Traxxas Car Kits: http://www.rcmart.com/catalog/car-ki...cturers_id=312
Where to buy Traxxas Car Parts: http://www.rcmart.com/catalog/hopup-...c-595_739.html作者: Dinballian 時間: 2009-3-20 13:03 標題: YR Battery for Losi micro-T Stadium, Baja, Desert Truck YR Battery for Losi micro-T Stadium, Baja, Desert Truck
Yeah Racing NiHM Battery Packs for Team Losi micro-T has re-stocked. This battery pack is specially designed for Team Losi 1/36 micro car series, like Micro-T Stadium Truck, Micro-Baja, Micro-Desert Truck, Raminator. This battery comes in set of two, with two different color skins to easy distinguish. You will never mix up the used battery with the fully-charged one. Also, the battery is equipped with the plug that is compatible to the PCB of the car kit. No modification is needed to use Yeah Racing Battery!
作者: Dinballian 時間: 2009-3-20 14:59 標題: Paper Ramp For Micro RC Buggy or Truck Paper Ramp For Micro RC Buggy or Truck
Wanna experience much fun for your Micro RC? Introducing you the paper ramp made by rcMart that is specially designed for micro RC truck. Foldable design makes it space-save in storage. Just put it on your living room in need & enjoy the fun! More, it is in discount now! Why not get one?
Material : Paper Cardboard
Colour: White & Black
Size: 280mm(L) x 210mm(W) x 70mm(H)
Qty: 2Pcs (TWO x jump stand)Don’t hesitate anymore! Buy one and have a try now!作者: Dinballian 時間: 2009-3-20 17:13 標題: Xpress 1:10 Mini Foam Tire Set (2pcs) 26 Deg Xpress 1:10 Mini Foam Tire Set (2pcs) 26 Deg
Xpress 1:10 Mini Foam Tire Set (2pcs) Black 26 Deg
Description:
There are the Xpress 1:10 Mini Foam Tire Set (2pcs) Black 26 Deg for 1:10 Mini
Feature:
For: 1:10 Mini
Tire Material: Sponge
Tire Color: Black
Wheel Material: Plastic
Wheel Color: Black
Specification:
Dual 5-Spoke
Width: 26mm
Outer Diameter: 54mm
Inner Diameter: 40mm
Include:
Tire (2 Pcs)
Wheel (2 Pcs)
Where to buy??
Xpress (#XPA-124) 1:10 Mini Foam Tire Set (2pcs) Black 26 Deg http://www.rcmart.com/catalog/rc-tou...l?cPath=35_803作者: Dinballian 時間: 2009-3-23 11:28 標題: Yeah Racing LK-0001 LED Light Kit for 1/10 Restock Now Yeah Racing LK-0001 LED Light Kit for 1/10 Restock Now
Ansmann Clash 28 Motor RPM 16,600 is now clearance at rcMart. Only has a very limited qty left!
Where to buy Ansmann Clash 29 Motor? http://www.rcmart.com/catalog/rc-bru...?cPath=293_945作者: Dinballian 時間: 2009-3-23 11:57 標題: Yeah Racing Various Highlight RC Product Restocked! Yeah Racing Various Highlight RC Product Restocked!
Motor & Accessories:
- Yeah Racing (#MT-0001) Hackmoto RC Motor 15T
- Yeah Racing (#MT-0002) Hackmoto RC Motor 18T
- Yeah Racing (#MT-0004) Hackmoto RC Motor 23T
Where to buy? http://www.rcmart.com/catalog/advanc...a&keywords=mt-
Tires & Wheels
- Yeah Racing (#WL-0009BU) 24mm Wheel & Tire Set 8Y-Spoke (BU)
- Yeah Racing (#WL-0009PP) 24mm Wheel & Tire Set 8Y-Spoke (PP)
- Yeah Racing (#WL-0009SV) 24mm Wheel & Tire Set 8Y-Spoke (SV)
- Yeah Racing (#WL-0010BU) 24mm Wheel & Tire Set 5-Spoke (BU)
- Yeah Racing (#WL-0013GD) 26mm Drift Wheel & Tire Set 8Y-Spoke (GD) For Drift Cars
- Yeah Racing (#WL-0017BU) 1:10 Drift Wheel & Tire Set 10 Spoke (BU)
- Yeah Racing (#WL-2001SP-1) 1:10 Mini High Realism 5-Spoke (PP) Wheel Set
- Yeah Racing (#WL-2002SB-D) 1:10 Mini High Realism 6-Spoke (BU) Drift Wheel Set
- Yeah Racing (#WL-2002SR-D) 1:10 Mini High Realism 6-Spoke (RD) Drift Wheel Set
- Yeah Racing (#WL-2004SB-2) 1:10 Mini High Realism 16-Spoke (BU) Wheel Set
Where to buy? http://www.rcmart.com/catalog/advanc...a&keywords=wl-
Engine & Accessories:
- Yeah Racing (#YA-0108BU) 1m Silicon Fuel Pipe (BU)
- Yeah Racing (#YA-0108YW) 1m Silicon Fuel Pipe (YW)
- Yeah Racing (#YA-0108OR) 1m Silicon Fuel Pipe (OR)
- Yeah Racing (#YA-0109) 500cc Fuel Pump
- Yeah Racing (#YA-0113BK) 21 Engine Manifold Silicone (BK)
- Yeah Racing (#YA-0118) 21 Engine Manifold Spring
where to buy? http://www.rcmart.com/catalog/engine...acturers_id=47
Radio & Accessories:
- Yeah Racing Radio 2CH AM27 (#RC-0001)
- Yeah Racing (#YA-0142GM) Alum. Radio Transmitter Wheel A (GM)
- Yeah Racing (#YA-0143GM) Alum. Radio Transmitter Wheel B (GM)
Where to buy? http://www.rcmart.com/catalog/advanc...rds=yeah+radio
Others:
- Yeah Racing (#YA-0130BU) 540 Motor Heat Sink (BU)
- Yeah Racing (#WPT-0035) Y Connector for JR to JR/JST
- Yeah Racing (#YA-0155) Body Masking Tape 4cmx10m
- Yeah Racing (#YA-0157) 2mm Line Tape
- Yeah Racing (#YA-0158) 4mm Line Tape
- Yeah Racing (#YA-0159) 7mm Line Tape
- Yeah Racing (#YT-0004) Curved Lexan Scissors
Where to buy? http://www.rcmart.com/catalog/default.php
(please search the item number to access to the product description)作者: Dinballian 時間: 2009-3-23 17:52 標題: Esky Lama V3, V4 Helicopter + YR LED Light Kit Restocked Esky Lama V3, V4 Helicopter + YR LED Light Kit Restocked
Where to buy ? http://www.rcmart.com/catalog/advanc...ds=cb+navihawk作者: Dinballian 時間: 2009-3-25 15:16 標題: Yeah Racing Motor Mount for F103RM & F103GT coming soon Yeah Racing Motor Mount for F103RM & F103GT coming soon
~COMING SOON~
Yeah Racing New & Unique Design Hop Ups Parts
For F1 Formula RC Car!!
Yeah Racing will soon launch their highly developed hop ups parts for RC Formula One. The specific designed hop ups part are aiming to increases the strength of the F1 chassis, and there are number of optional adjustment for advance setting to improve the F1 Car performance on the track, in different conditions. The hop ups shown below are already down to the production line and will be released soon. Please keep updating the latest news from rc-rss.com or yeahracing.com.
Aluminum Motor Mount feature:
- Single Piece Motor Mount
- Fit Yeah Racing (#YA-0180) Tornado Cooling Fan X2
- Rear Wing adjustable
- Super strong and light weight
- Improved weight balance
- Increasing cooling efficiency
Fit Tamiya F103RM and F103GT
Yeah Racing featured Li-Po Racing Pack Battery will be restocked by next week @ rcMart .com. Due to the large demand of the Yeah Racing Li-Po Batteries, rcMart will have full stock for LP-0032, LP-0036, LP-0042, LP-0043 and LP-0050. Updates will be available at rss.rcmart.com or rcMart.com, please visit for the latest news.
- (#LP-0032) Li-Po Racing pack 7.4V 3200mAh 20C - item in stock
- (#LP-0036) LiPo Racing Pack 7.4V 3600mAh 20C - item in stock
- (#LP-0042) Li-Po Classic Pack 7.4V 4000mAh 25c
- (#LP-0043) Li-Po Saddle Pack 7.4 5000mah 20c 2S3P (70×43x24mm)
- (#LP-0050) Li-Po Racing Pack 7.4V 5000mAh 25c with case
rcMart is now offering a special deal of the Tamiya ESC TEU-101BK for RC beginners. This Tamiya ESC TEU-101BK is very durable, thus rcMart would like to introduce this ESC to the RC Beginners.Therefore, you can improve your RC technique without worrying to damage this ESC. This ESC also has some good comment of compatible with 21T - 27T motor, what an ideal ESC for beginner. (please have a look at the review below)
Description:
The 1/8-scale 8IGHT-T 2.0 Truggy offers big performance and an even bigger list of features. Team Losi Racing has taken the most innovative, revolutionary 1/8-scale nitro truggy design in racing history and made it even better, with engineered features and design elements that surpass every other truggy on the market
RC 1:8, Truggy, Nitro-Powered, Off Road, Almost-Ready-To-Run ARTR
Feature:
Extended Chassis with Tuned Flex Technology (TFT) 2.0
Precision steering geometry and servo saver
Extended-length front and rear arms
Updated suspension geometry with longer front and rear shocks
Heavy-duty dogbones and outdrives
Heavy-duty front and rear brake disks
Lightened shock towers
Sure-Close™ fuel tank closure with EFRA approved fuel line kit included
50T Center spur gear
Revised radio tray design
Heavy-duty rear outer 3.5mm hinge pins
Reinforced rear bearing insert system
Laser etched engine mounting guides
Center driveshaft grease boots
Specification:
Vehicle:
Length: 560mm
Width: 415.9mm
Weight: 3.855kg
Wheelbase: 379 - 383mm
Body:
Clear Polycarbonate Body
Include:
4WD Truggy Race Roller
Body
Losi U.S. Hex Wrench Set (.050″, 1/16″ , 5/64″ & 3/32″)
Decals
Instruction
Require:
.21 or .28 Engine
Tuned Exhaust System
2-Channel Radio System w/High Torque Servos
Receiver Pack and Charger
Glow Driver
Starter Box
Nitro Fuel
Fuel Gun or Bottle
Paint for Polycarbonate Bodies
rcMart is offering a NOVAROSSI 353-08 On Road Engine + Free Pipe Combo Deal! By getting the NOVAROSSI (#353Race.12) 353-08 On Road Engine comes with a FREE Novarossi .12 Inline Pipe too and also save Up To USD $75.90.
Due to stock clearance, this combo offer may end anytime!
NOVAROSSI (#353Race.12) 353-08 On Road Engine
353 On Road Engine
Engine Size: .12
Version : 2008
Displacement: 2.09cc
Maximum power: 1.68 hp
R.P.M. (M.P.): 42.000 rpm
Practical Range: 6.000~ 43.700 rpm
Bore x Stroke: 13.70 mm x 14.25 mm
Ports n. 3
Balls type: Ceramics
Starting: Starterbox
Crankshaft Ø: 11.90mm-Turbo SG mm
Type: 5,4mm Slide
Glow Plug Type: Turbo - C5TGF
Exhaust Type: Rear exhaust
Type: Aluminium
Adjustment: Single
Code: 10608
Fuel type: Advise 16% Nitro
Fuel recommendation:
This engine has been developed to be used with a fuel with a maximum of 16% nitro content and with an oil percentage not lower than 7%. We therefore suggest not to use it with different percentages compared to the ones specified here above.
Glowplug:
The glowplug of engine is a Turbo type glowplug.
Turb glowplugs have a different shape than Standard glowplugs and therefor are not interchange able with engines that are using Standard glowplugs!
Crankshaft:
The crankshaft is made from high quality steel and is available in “TURBO SG” version. It has a diameter of 11.90mm. The increased diameter provides more torsional stiffness.
Sleeve:
The 3 ports sleeve is made in hard-chromed brass
(true ABC construction).
FREE NOVAROSSI (#51607) 012 Inline Pipe 6mm (Polished)
Qty: 1pc
“Turbo” tuned pipe with ring and satin finish.
for 2,1cc to 2,5cc car engines.
Where to buy the NOVAROSSI 353-08 On Road Engine + Free Pipe Combo? http://www.rcmart.com/catalog/rc-eng...l?cPath=38_925作者: Dinballian 時間: 2009-3-31 15:56
Yeah Racing (#YA-0188) Balance Weight New Arrival
_001.jpg)
