天氣唔好,無得試車~作者: xjjj 時間: 2009-3-29 15:31
nice作者: tiger1 時間: 2009-3-29 17:45
very nice ar, giant wing!!作者: COLT仔 時間: 2009-3-29 19:36
nice 作者: maxchow 時間: 2009-3-29 19:59
使唔使靚成咁呀??作者: derek5 時間: 2009-3-29 20:25
多謝讚賞!我之前等架B4等到頸都長,另外有D parts要從外國買…都用了不少時間、心機…作者: coke 時間: 2009-3-29 20:27
A good chocie for Losi shocks作者: derek5 時間: 2009-3-29 20:30
coke, you are right! but i have a set of AE shocks and will compare both of it...作者: coke 時間: 2009-3-29 20:33
After u use Losi shocks ,u will put AE shocks in spare part bin作者: derek5 時間: 2009-3-29 20:38
haha, that's why a lot of X6 and atomic carbon S2,S4 owner will use Losi rather than AE.....作者: coke 時間: 2009-3-29 20:44
Hi derek5 ,
A new X6 body for ur ref.作者: coke 時間: 2009-3-29 20:47
Ref. http://www.oople.com/rc/photos/reviewx6/
http://4wdrc.com/作者: derek5 時間: 2009-3-29 20:54
thanks mate, i saw that before, but i still love the original X6 body and wing, that one you show me is too cyber, anyway, thanks for your reference!作者: coke 時間: 2009-3-29 21:13
u are wellcome作者: derek5 時間: 2009-3-29 21:30
haha wellcome=惠康... 唔好介意…作者: coke 時間: 2009-3-29 21:40 15#derek5
check PM pls~作者: MacUser 時間: 2009-3-30 13:50
derek5兄, 部車好正wor, B4+X6+Losi+RPM, 好補, 靚到無朋友, 我都整部X5, 因部XX-4是舊款, 我又搵唔到Losi新款油壓, 同你果部真係無得比!! 作者: hardmankam 時間: 2009-3-30 14:08
very nice! please tell us how it handles. thanks!作者: derek5 時間: 2009-3-30 14:32 25#MacUser
thanks for your comment, if you want to find the losi shocks, you can try: www.losipartshouse.com, i think the shock from XX4, XXXCR etc. are the same, maybe you just need to change some parts which you need, otherwise, go to that www, can find all you need! hope can help you~作者: andrewlau 時間: 2009-3-30 16:24 27#derek5
C hing, I checked losipartshouse b4, but I didnt see a full set shock for sell, so u order it part by part or in set??作者: derek5 時間: 2009-3-30 20:15 28#andrewlau
you need to find the parts by parts, no in set of it.
you better to find the exploded view from www.losi.com, will easy to find out the parts no. which you need~作者: crusaderlyf 時間: 2009-3-30 20:37
未知大家有没有留意, 虽然限滑压片是AE的,但大齿和限滑摩擦片似乎不是AE的,难道是用了LOSI的,因为固定螺丝的弹簧垫圈是LOSI样式, 好象波箱下固定片是蓝色OP件
正斗!!
但是后轮TOE IN太多,加上后避震弹簧调得太硬,导致抓地下降, 跑起来加速虽然快, 但转向会好飘, 可以在走行中适当调整作者: Concept 時間: 2009-3-30 20:46