標題: Motor for TA05 [打印本頁] 作者: st_kuen 時間: 2009-4-25 22:19 標題: Motor for TA05 C-hings,
I'm planning to buy a new motor.
Anyone know that the max. T of motor could be used in a original TA05 (no modification) without damage to the car?
Thanks!作者: asus6800 時間: 2009-4-25 22:30
23T.....作者: Cliff 時間: 2009-4-25 22:39
10T作者: rcray 時間: 2009-4-25 23:43
upgrade to Hobbywing 35A or 60A 9T package.作者: 200sxsr20 時間: 2009-4-25 23:55
Original front ball diff? 23T brushed or 4000kv brushless would be the "max".
If you want more speed, you need the front direct solid, only HK$120, but run forever. Then you can "think" about 5.5, 4.5 brushless.作者: st_kuen 時間: 2009-4-26 00:38
Thanks! C-hings.
I never know the original TA05 (no modification) can support the 10T motor.
Meanwhile, what mean by 'Original front ball diff' and 'front direct solid'? I'm a new comer.
Thanks!作者: 200sxsr20 時間: 2009-4-26 02:57
原厂珠差既珠差杯係用膠造,玩快車好快熔,快過4000kv無刷的話車尾最好換金屬珠差杯,車頭就換頭直軸或換金屬珠差杯,不過建議用頭直軸,唔洗整咁多野同維修.
基本上TA05係好硬浄,set得好其實唔洗大改都幾好跑,邊樣爛左或磨损左先至改邊樣都得,除左珠差...作者: st_kuen 時間: 2009-4-26 15:45
Many thanks! 200sxsr20
Thank for your very helpful and details suggestions.
Meanwhile, if I buy the new motors (say 15T & 17T), how could I check out the 摩打齒數?作者: manman1999 時間: 2009-4-26 15:48 7#200sxsr20
膠珠差杯頂到有刷11t嗎?作者: andyQQ 時間: 2009-4-26 18:17
Hobbywing is good choice,
