標題: TLP Expro II charger [打印本頁] 作者: st_kuen 時間: 2009-4-26 16:00 標題: TLP Expro II charger C-hings,
What is the current should I for charging the 7.2v ni-mh battery:
A) for fast charging - I currently use 5A
B) for slow charging - use 5A also?
C) for fast charging the 6v 1400ni-mh receiver battery - use 1.5A?
Many thanks!作者: st_kuen 時間: 2009-4-26 19:10
Furthermore, when I connect the battery to the charger without pressing the yellow bottom, the charger should in the slow charge mode. A continue 'Beep Beep' sound is heard.
Is it normal that a continue 'Beep Beep' sound is heard in the slow charge mode.
Will the charging automatically stop? And how can I know the charging is finished in the slow charging mode?
Thanks!作者: st_kuen 時間: 2009-4-27 00:31
E:\Patrick\RC Car\charger.jpgphoto of charger!!作者: Challenager 時間: 2009-4-27 01:28
A) for fast charging - I currently use 5A
1000mah=1A, 2000mah=2A, 4500mah=4.5A、 ETC.....
B) for slow charging - use 5A also?
slow charging use a half. 例如：1000mah=0.5A,2000mah=1A, 4500=2A....
C) for fast charging the 6v 1400ni-mh receiver battery - use 1.5A?
6v 1400ni-mh=1.4A, fast charging use 1A to 1.2A ok la作者: samitoneau 時間: 2009-4-27 02:25
what model is your charger?作者: samitoneau 時間: 2009-4-27 03:04
ar, the topic.
this charger is not hard to use. just follow the manuall and press the yellow button.
I usually discharge by myself and use peak charge. Its normal for the beep beep sound in slow charge mode. If you start the fast charge mode, the charger will stop automatically when the battery is fully charged. Then the charger will change to slow charge mode by itself. But usually this charger is not stopping at the right time. Your dont know when the battery is finished charging. if you charge at 1C, than you count the time of fast charge. if the fast charge time is much less than 1 hour, than you have to press the button and fast charge again. (of course don charge again when the battery is too hot because the battery might be dead).
This kind of charger hai gum ga la. You have to keep checking when the fast charge ends and calculate if the battery is finished charging or not. Other charger with LCD monitor is better. At least you know how full the battery is being charged.作者: st_kuen 時間: 2009-4-27 13:44
Thanks! samitoneau & Challenager
Many thanks for your helpful information & advise.