RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: lipo問題 [打印本頁]

作者: dvk101 時間: 2009-5-17 22:53
標題: lipo問題
我第一次差lipo電，差到二千幾就完咗同嚿電都唔暖，請問如可知道差滿嚿電呢？條線係唔係温度線，點用？請師兄幫手：：唔刻！

: 登錄/註冊後可看大圖

作者: move7648 時間: 2009-5-17 23:19
叉lipo係唔會暖喎
最多都係叉機熱

作者: dvk101 時間: 2009-5-17 23:23

叉lipo係唔會暖喎
最多都係叉機熱
move7648 發表於 2009-5-17 23:19

登錄/註冊後可看大圖

thank you

作者: edmondhk 時間: 2009-5-18 00:06
條線係差油車用既火咀電用既

作者: tekin 時間: 2009-5-18 08:05
lipo is cool when charge

作者: fatball 時間: 2009-5-18 10:21
2000 MAH is normal when the battery charging frist time.

作者: ellis 時間: 2009-5-18 10:22
據小弟所知, 呢d差機係咪計 v 數, 唔係計mah數架呢~所以差到二仟幾mah 但夠v數就停.
有錯請指教.

作者: Andrew168 時間: 2009-5-18 10:38
叉 lipo 電應該係夠v數就停

作者: hk_sdu 時間: 2009-5-18 12:24
The charger should preset to stop at 8.4V for 2 cell 7.4v lipo battery.

I am using a $480 charger, very popular in KWS

作者: hk_sdu 時間: 2009-5-18 12:27
But i am not sure what is the max AMP should i use to charge?

For example, if i charge 3800mAh lipo, should i use 1C, which is don't charge higher than 3.8A?

作者: Andrew168 時間: 2009-5-18 12:36

But i am not sure what is the max AMP should i use to charge?

For example, if i charge 3800mAh lipo, should i use 1C, which is don't charge higher than 3.8A?
hk_sdu 發表於 2009-5-18 12:27

登錄/註冊後可看大圖

exactly

作者: hardmankam 時間: 2009-5-18 14:07

But i am not sure what is the max AMP should i use to charge?

For example, if i charge 3800mAh lipo, should i use 1C, which is don't charge higher than 3.8A?
hk_sdu 發表於 2009-5-18 12:27

登錄/註冊後可看大圖

For Lipo, its at most to charge at 1C. Lower than 1C is also ok.
eg: 3800 mah -> charge at a MAX of 3.8A

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)