RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: overland唔識轉灣. [打印本頁]

作者: maxchan0850 時間: 2009-5-25 11:59
標題: overland唔識轉灣.
我部OVERLAND E家係咁向住左邊係咁轉...向唔番前面同右邊..
係唔係壞左零件?
請師兄指教~
THANKS.

作者: 800mah 時間: 2009-5-25 12:02
servo saver 移左位, 打散servo, 砌返佢就 ok.

唔容易架.

作者: maxchan0850 時間: 2009-5-25 12:29
我已經拆散車頭..再裝過...
開頭玩左一陣都無事...
之後又變番轉死左邊..
咁點算好?..

作者: Ang 時間: 2009-5-25 19:54
If you have already 拆散 and 再裝過 and there is nothing broken visually, the VR may be the problem. To replace VR, you have to get a new one from the track but it is a tricky job cause everything is so tiny.

作者: bmw740i 時間: 2009-5-25 20:15
係唔係掃左 Servo 齒呀??

作者: maxchan0850 時間: 2009-5-25 22:45

If you have already 拆散 and 再裝過 and there is nothing broken visually, the VR may be the problem. To replace VR, you have to get a new one from the track but it is a tricky job cause everything is ...
Ang 發表於 2009-5-25 19:54

登錄/註冊後可看大圖

咁換個新的要幾錢左右?
THANKS.

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)