RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: DB01 electrical/gear setting issue [打印本頁]

作者: mlee 時間: 2009-6-1 19:03
標題: DB01 electrical/gear setting issue
本帖最後由 mlee 於 2009-6-1 19:09 編輯

Hi All Brothers,

I am having issues with my DB01, please help:
Background:
battery: 4000 25C 2S
with Slipper control:
Setting 1) 9T with 17/91; the slipper and motor get very hot after about 10 minutes; the ESC is not hot at all.
Setting 2) 23T with 23/91; same as above,
Setting 3) 23T with 19/91; same as above,

Is there anything that I can do on the setting other than adding heat sink?

Thanks in advance

作者: mlee 時間: 2009-6-1 23:24

Anyone can help please

作者: turbines 時間: 2009-6-1 23:32
是否齒比太大,或者傳動系統上有阻力.
但正常狀態下都有一定的熱量

作者: mlee 時間: 2009-6-1 23:42
本帖最後由 mlee 於 2009-6-1 23:44 編輯

3# turbines

傳動系統上有阻力? Does it mean on the belts? please tell me more, checked the rear diff, and front one-way are ok.....
I understand that there should be some heat involved, however, the heat shielding plastic that came with the car melt

My Lipo also get heated from this.....

作者: Angtr 時間: 2009-6-2 01:47
check both belt tessions.. and try 17pioion or below / 91s gear.

作者: mlee 時間: 2009-6-2 11:29
本帖最後由 mlee 於 2009-6-2 11:31 編輯

5# Angtr

Thank you for your advise, I will try to get a belt tensioner and see what happen...

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)