RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: Servo recommendation [打印本頁]

作者: yikl 時間: 2009-7-28 14:02
標題: Servo recommendation
Hi C-hing,

Any mid range digital servo recommendation? Those top ends servo like Futaba 9551, Ko 2413 are very expensive. I would something at a cheaper price.

I see there are some ko : 2511, 2512.
http://www.kopropo.com/america/i ... d=25&Itemid=127
Any c-hing has comments on those?

作者: lkwmic 時間: 2009-7-28 14:04
You may find some more reference here!

http://www.futaba-rc.com/servos/digitalservos.html

作者: Marco明 時間: 2009-7-28 15:06
都係果句.....servo買靚d好......主要係耐用同效能問題
免得後悔

作者: mouse 時間: 2009-7-28 16:41
futaba S3050 is OK and its price is affordable.

作者: dtm 時間: 2009-7-30 13:21
Try to stick with digital servos, best explanation found here..

http://www.futaba-rc.com/servos/digitalservos.pdf

作者: smallfaifai 時間: 2009-7-30 14:04
冇錢不如去買二手servo，例如鴻x不時都有二手9451，玩touring一定夠用，都係$3xx

作者: 毛 時間: 2009-7-30 16:25
三禾個隻 vrx 0.08 / SEC 8kgs...夠唔夠用呀?

作者: 毛 時間: 2009-7-30 16:26
三禾個隻 0.08 / SEC 8kgs...夠唔夠用呀?

作者: smallfaifai 時間: 2009-7-30 17:52

三禾個隻 vrx 0.08 / SEC 8kgs...夠唔夠用呀?
毛發表於 2009-7-30 16:25

登錄/註冊後可看大圖

點會唔夠！9451冇記錯好似都係0.1sec/8 kg/s

作者: dtm 時間: 2009-7-30 20:28
9451 or 9452 VERY good servos!

作者: yikl 時間: 2009-7-30 22:15
sanwa 801 out of stock la. I think 2nd hand 9451 is good deal. Let me check Hung x next time la. Thanks c-hing

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)