RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: Share My Report of VM II (用家) [打印本頁]

作者: koji1230    時間: 2009-8-1 02:10
標題: Share My Report of VM II (用家)
本帖最後由 koji1230 於 2009-8-2 01:52 編輯

i have buy VM II about a month,but i haven't try/play it because of typhoon/rainnie days.........  Finally,i play it tonite
First,i just test/play it @ football ground (always play there )
compare it to my A210ss,VM II must better than A210ss (same tire and ESC and gear ratio),very very stable,running so smoth and fast,especially @ corner,very good handling,u will do one thing: full throttle and u can feel so safety

my setting:
camber F : 1 deg.
             R:  1 deg.
F toe out : 1 deg.
R toe in   :  2 deg.
height F  :   5 mm
           R  :   6 mm

ESC Hobbywing 60A/9T combo
Servo Futaba S9551
Tires : CROSS (H)

any brothers can share your VM II setting???
THX
作者: NINEDOWN    時間: 2009-8-1 03:15
本帖最後由 NINEDOWN 於 2009-8-1 03:17 編輯

我d setting 同你差不多   同樣機器  但你d車高...............
作者: lung1    時間: 2009-8-1 08:48
呢d只係好basic 既setting..... 我諗個個都差唔多.........
請問樓主有無鋪track 玩? 定係亂襟走?
作者: ap    時間: 2009-8-1 09:35
just test/play it @ football ground (always play there  ),
新砌好新車梗係好跑的。
作者: chrishkyung    時間: 2009-8-1 09:37
play at street/football ground, never can test the performance of the chassis
作者: rcfire    時間: 2009-8-1 11:46
本帖最後由 rcfire 於 2009-8-1 11:54 編輯
play at street/football ground, never can test the performance of the chassis
chrishkyung 發表於 2009-8-1 09:37


Play CAR IS JUST FOR FUN,YOU THINK EVERYPEOPLE IS A FIGHTER?HAHA

YOU THINK EVERYONE IS BIG COUNTRY? STEP BY STEP LAR!
作者: chrishkyung    時間: 2009-8-1 12:04
i didnt condemn playing on street....

I just point out that performance could not be determined by testing on street.....

for example, real car testing, top gear/best motoring always test new cars on race circuits....why? apart safety reasons, they could use highspeed running at corners...and in circuit need acceleration and deceleration seriously....all those aspects are difficult to test on streets...similar principle used to apply on rc car ...

If I am wrong, you are welcome to correct me
作者: koji1230    時間: 2009-8-1 12:35
5# chrishkyung

i think most of rc players (50%-60%)also play @ street,
may be only 40% or less rc players play @ TC/PYC.......

just disscuss,DON'T MAKE ARGUE
作者: koji1230    時間: 2009-8-1 12:35
3# lung1

有鋪track 玩
作者: koji1230    時間: 2009-8-1 12:36
我d setting 同你差不多   同樣機器  但你d車高...............
NINEDOWN 發表於 2009-8-1 03:15

what setting of your 車高??
just share here pls .....
thx
作者: NINEDOWN    時間: 2009-8-1 19:02
what setting of your 車高??
just share here pls .....
thx
koji1230 發表於 2009-8-1 12:36



點會頭高尾低嫁   
你反轉 就合理d姐
作者: petscan    時間: 2009-8-1 21:40
1# koji1230


I also just finished this car and test drive in Tin Shui Wai track today. So far so good. When I accelerated in the narrow straight road it is very stable and also rather easy to correct any slight deviation in direction.
作者: koji1230    時間: 2009-8-2 01:41
本帖最後由 koji1230 於 2009-8-2 01:44 編輯

11# NINEDOWN

oh....sorry,(wrong typing) i correct it
作者: smlming    時間: 2009-8-2 16:41
我都出左一部,未動手,用(60A ESC/8.5T motor) 想問 motor 用幾多P? and T? 好,請各C Hing 指點。Thanks
作者: koji1230    時間: 2009-8-2 20:56
original Spur Gear is 64p 100T,if u use 60A/8.5T ESC,just use 7-9 final gear ratio la
i use 64p 24T opinion, gear ratio about 7.3
作者: smlming    時間: 2009-8-2 21:00
Many thanks
作者: beebone    時間: 2009-8-6 12:35
點會頭高尾低嫁   
你反轉 就合理d姐
NINEDOWN 發表於 2009-8-1 19:02


人地
height F  :   5 mm
           R  :   6 mm
係返轉寫咋..........
作者: beebone    時間: 2009-8-6 12:40
I suppose to buy A210SS, but out of stock. I will go for the Japanese goods coz of the quality.
End up I  bought a VMII and the graphite plate finishing is slightly rougher than other brands, the Aluminum parts are good and precise, belt tension is better than X-Ray and logic (X-Ray T2 has very lose front belt tension in default setting).

I bough a 25T pinion gear with also Hobbywing 8.5T motor set, will see hows the performance on street track later on.
作者: lkwmic    時間: 2009-8-6 14:46
I suppose to buy A210SS, but out of stock. I will go for the Japanese goods coz of the quality.
End up I  bought a VMII and the graphite plate finishing is slightly rougher than other brands, the Al ...
beebone 發表於 2009-8-6 12:40

Waiting for your detailed report !




歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/) Powered by Discuz! X3.2