081309213943.jpg (138.68 KB, 下載次數: 4)
2009-8-16 09:23 上傳
作者: Noir.KAZE 時間: 2009-8-16 09:34
我插左係接收
作者: lung1 時間: 2009-8-16 09:38
all ching help, how to connect heatsink fan top ESC ? ESC has no plug for this...
292060
gimsink 發表於 16/8/2009 09:23
自已係電變正負極焊多條線咪得law...........
唔識的話就直接插落接收....
作者: Noir.KAZE 時間: 2009-8-16 09:46
係ESC出同接收出會唔會爭好遠?
作者: lung1 時間: 2009-8-16 09:58
你話呢~ 電就7.2/7.4v,接收得5v....
作者: gimsink 時間: 2009-8-16 10:43
ching
BL ESC three o/p wirs, I think cannot connect to fan. So do you mean plug into the receiver 3rd channel ? I also have brushed ESC, if connect to o/p, then it is in parallel with the motor, will it affect the motor speed ?
作者: lung1 時間: 2009-8-16 10:51
本帖最後由 lung1 於 2009-8-16 10:59 編輯
ching
BL ESC three o/p wirs, I think cannot connect to fan. So do you mean plug into the receiver 3rd channel ? I also have brushed ESC, if connect to o/p, then it is in parallel with the motor, wi ...
gimsink 發表於 16/8/2009 10:43
係駁落電變電既正負極先岩................並唔係魔打既正負極..............
作者: move7648 時間: 2009-8-16 10:58
即係電池入電變嗰邊呀...
作者: move7648 時間: 2009-8-16 11:00
本帖最後由 move7648 於 2009-8-16 11:03 編輯
if connect to o/p, then it is in parallel with the motor, will it affect the motor speed
gimsink 發表於 2009-8-16 10:43 AM
what's the consumption of the fun?
in fact, if u are worrying the performance when connection the fan
u should also consider the extra weight and balance of the fan after installation
dont made thing go complicated, take it easy la
as your fan on heat sink is only a 3R product
作者: wingwing 時間: 2009-8-16 11:09
電變冇位插落接收穩陣D，駁電池輸入電變位始終冇咁理想，如果處理唔好，short咗就麻煩...
作者: gimsink 時間: 2009-8-16 22:56
move7648 ching, I connect the fan just to give some cooling to prevent overheat, I just play for fun, weight + balance etc..not my concern.
what do you mean by "only 3R product?", I didn't make things complicated, just want to get a very simple solution to connect a fan.
wingwing ching, thanks advice, I will follow your instruction.
作者: Alcohol 時間: 2009-8-16 23:17
我直接落少少錫焊落枝接收枝針到再包膠
作者: gtimax 時間: 2009-8-16 23:51
千其唔好咁裝, D 靚FAN 一SHOT就燒!
買個接收插十幾蚊(KO) http://bbs.rc-evo.com/forumdisplay.php?fid=82&page=1
一努永日, 同埋千其唔好貪方便在電變FAN 位取電,是會JAM機的!
作者: lung1 時間: 2009-8-16 23:53
好心整個插啦.................安全好多....
| 歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/) | Powered by Discuz! X3.2 |