RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: E-Revo跑TKO洗唔洗換野? [打印本頁]

作者: edmondhk 時間: 2009-8-17 08:21
標題: E-Revo跑TKO洗唔洗換野?
eg.呔,呤,油壓果類
中曬毒想換車

作者: kingman7788 時間: 2009-8-17 09:41
你用無刷的話o太鈴點都要換，如果唔係甩到媽媽都唔認得

作者: powis 時間: 2009-8-17 10:24

你用無刷的話o太鈴點都要換，如果唔係甩到媽媽都唔認得
kingman7788 發表於 2009-8-17 09:41

登錄/註冊後可看大圖

my recommendation is need to change the skid plate in front and rear to metal la.

the tire....original tire is ok to run (for me haha ) but damaged in my second time when i played it...so have to change ga la....

作者: kingman7788 時間: 2009-8-17 10:46

my recommendation is need to change the skid plate in front and rear to metal la.

the tire....original tire is ok to run (for me haha ) but damaged in my second time when i played it...so have ...
powis 發表於 2009-8-17 10:24

登錄/註冊後可看大圖

skid plate i only changed after original damaged. Not urgent task anyway.
For tires......mine one was 4.5R and i dun feel ok to run on my emaxx with original tires......even tuned 70% of EPA still cannot control, power is nothing without control ma

作者: edmondhk 時間: 2009-8-17 11:23

skid plate i only changed after original damaged. Not urgent task anyway.
For tires......mine one was 4.5R and i dun feel ok to run on my emaxx with original tires......even tuned 70% of EPA still ...
kingman7788 發表於 2009-8-17 10:46

登錄/註冊後可看大圖

how much for tires and rims?

作者: kingman7788 時間: 2009-8-17 11:27

how much for tires and rims?
edmondhk 發表於 2009-8-17 11:23

登錄/註冊後可看大圖

around $1.1k with 23mm hex la

作者: edmondhk 時間: 2009-8-17 11:39

around $1.1k with 23mm hex la
kingman7788 發表於 2009-8-17 11:27

登錄/註冊後可看大圖

1.1k for Tires and rims only?!!
omg....

作者: powis 時間: 2009-8-17 17:02

1.1k for Tires and rims only?!!
omg....
edmondhk 發表於 2009-8-17 11:39

登錄/註冊後可看大圖

haha ..yea..it may need...1.1K.....
well, i just bought the 17mm wheel and tire....$760 around la....

作者: edmondhk 時間: 2009-8-17 17:24

haha ..yea..it may need...1.1K.....
well, i just bought the 17mm wheel and tire....$760 around la....
powis 發表於 2009-8-17 17:02

登錄/註冊後可看大圖

17mm同23mm有咩分別?

作者: kingman7788 時間: 2009-8-17 17:31

17mm同23mm有咩分別?
edmondhk 發表於 2009-8-17 17:24

登錄/註冊後可看大圖

http://www.prolineracing.com/t-HowToTipsWheelOffsetGuide.aspx
for your reference

作者: edmondhk 時間: 2009-8-17 17:53

http://www.prolineracing.com/t-HowToTipsWheelOffsetGuide.aspx
for your reference
kingman7788 發表於 2009-8-17 17:31

登錄/註冊後可看大圖

thx

作者: tatame 時間: 2009-8-17 18:40
本帖最後由 tatame 於 2009-8-17 18:47 編輯

1.1k for Tires and rims only?!!
omg....
edmondhk 發表於 2009-8-17 11:39

登錄/註冊後可看大圖

平玩去偉高買Axial oversized wheel ! $86 一對 total $172 , tire 買proline $240 一對 total $480 , 加埋唔洗HK$700 ! proline d tires 好come 俾一次$ 玩左成年都未洗換!

下圖為axial oversized wheel + proline tire + 17mm hex

登錄/註冊後可看大圖

作者: edmondhk 時間: 2009-8-17 19:52
本帖最後由 edmondhk 於 2009-8-17 19:58 編輯

平玩去偉高買Axial oversized wheel ! $86 一對 total $172 , tire 買proline $240 一對 total $480 , 加埋唔洗HK$700 ! proline d tires 好come 俾一次$ 玩左成年都未洗換!

下圖為axial oversized wheel + p ...
tatame 發表於 2009-8-17 18:40

登錄/註冊後可看大圖

OK WOR,計下數先
睇下出涼再放左部DT入E-revo,同入多排電
仲要買Blushless set,呔
$$$$$$$$$$$$$$$$$$
計計埋埋都過5k

作者: oscarchoi 時間: 2009-8-17 20:07
想問在TKO玩用咗23mm輪內胆是否要軟身的呢?

作者: edmondhk 時間: 2009-8-18 10:36
見到Traxxas 有隻呤係for Revo,用果隻加proline 呔得唔得?
係唔係唔洗換wheel hub?

登錄/註冊後可看大圖

作者: smalljohndoe 時間: 2009-8-18 12:25

my recommendation is need to change the skid plate in front and rear to metal la.

the tire....original tire is ok to run (for me haha ) but damaged in my second time when i played it...so have ...
powis 發表於 2009-8-17 10:24

登錄/註冊後可看大圖

佢問EREVO 唔係EMAXX wo, EREVO唔洗換skidplate, 佢車底個設計好少會撞到skidplate,我果架都冇換
至於呔同鈐, 要主要proline 有分40 series 同3.2"
如果40 series 就大d, , 平既可用axial$100內有一對~行17mm hex(可以買返traxxas出的, rcmart 有), ,貴d可以買返proline bealock~行23mm hex(智落有)
3.2" proline出的行14mm hex,好似係traxxas 原裝果個size, rpm 都有出, 有14mm同17mm 豕種
買呔記得睇size 吖

作者: smalljohndoe 時間: 2009-8-18 12:33

想問在TKO玩用咗23mm輪內胆是否要軟身的呢?
oscarchoi 發表於 2009-8-17 20:07

登錄/註冊後可看大圖

我就用23mm proline 鈐加 bigjoe, 內胆用原裝, 夠咬地我諗唔洗換, 不過因為呔有offset同闊左, 會冇咁好灣

作者: smalljohndoe 時間: 2009-8-18 12:36
3972X Traxxas TRX Sport Wheel Maxx Series Chrome Finish (2)

These are Optional Chrome Sport Wheels for the Traxxas Maxx Series Trucks.

FEATURES:
Suitable for both the T-Maxx and E-Maxx.
Efficient design reduces weight while maintaining the Maxx durability.
The durable nylon material is much lighter than aluminum and will not bend or corrode.
5-spoke wheels with a mirror-chrome finish.
The bead is left natural to make tire gluing a snap.
Genuine Traxxas quality and fit!

INCLUDES:
2 Chrome Wheels

REQUIRES:
Tires & Inserts
CA Glue (# GPMR6002)

SPECS:
Outer Diameter: 3-7/16" (86mm)
Inner Diameter: 3-1/8" (77mm)
Width: 2-1/4" (56mm)
Hex Hub: 1/2" (12mm)

作者: orochichu 時間: 2009-8-18 15:32

eg.呔,呤,油壓果類
中曬毒想換車
edmondhk 發表於 2009-8-17 08:21

登錄/註冊後可看大圖

點解中毒傢

作者: powis 時間: 2009-8-18 15:55

佢問EREVO 唔係EMAXX wo, EREVO唔洗換skidplate, 佢車底個設計好少會撞到skidplate,我果架都冇換
至於呔同鈐, 要主要proline 有分40 series 同3.2"
如果40 series 就大d, , 平既可用axial$100內有一對~行17mm ...
smalljohndoe 發表於 2009-8-18 12:25

登錄/註冊後可看大圖

I am a E-revo owner. the rear skid plate was damaged after second run of my car in TKO..of course my style of driving also may be one of the factor that make the plate damaged, just alert that this plate is also quite easy to damaged...my friends Slayer also damaged on the rear plate too.

作者: edmondhk 時間: 2009-8-18 18:21
其實我最主要想問14,17,23mm有幾大分別同差係邊?

作者: edmondhk 時間: 2009-8-18 18:58

點解中毒傢
orochichu 發表於 2009-8-18 15:32

登錄/註冊後可看大圖

係TKO試玩人地部E-revo囉
點俾油都好穩定,又快
我部DT汁車汁我都

作者: manju 時間: 2009-8-18 20:22

I am a E-revo owner. the rear skid plate was damaged after second run of my car in TKO..of course my style of driving also may be one of the factor that make the plate damaged, just alert that th ...
powis 發表於 18/8/2009 03:55 PM

登錄/註冊後可看大圖

係呀, 我個個 Week 都係TKO玩部 E-Revo, 個Skid Plate 玩左大半年都無問題,

作者: alonso01 時間: 2009-8-18 23:32

平玩去偉高買Axial oversized wheel ! $86 一對 total $172 , tire 買proline $240 一對 total $480 , 加埋唔洗HK$700 ! proline d tires 好come 俾一次$ 玩左成年都未洗換!

下圖為axial oversized wheel + p ...
tatame 發表於 2009-8-17 06:40 PM

登錄/註冊後可看大圖

axial oversized wheel 係咪beadlock架?因為無論我點痴都好, 劈沙灘劈多兩嘢都, 條呔都甩咗少少

作者: smalljohndoe 時間: 2009-8-19 09:41
本帖最後由 smalljohndoe 於 2009-8-19 09:55 編輯

axial oversized wheel 有beadlock同痴呔兩種,
更正
不過axial 隻beadlock 係aluminum ring, 但好少鑼c,有師兄用過唔係好得甩得好勁

作者: manju 時間: 2009-8-19 13:12

axial oversized wheel 係咪beadlock架?因為無論我點痴都好, 劈沙灘劈多兩嘢都, 條呔都甩咗少少
alonso01 發表於 18/8/2009 11:32 PM

登錄/註冊後可看大圖

beadlock 先天設計係會玩到甩呔, 不過可以用膠水黏住佢

作者: kingman7788 時間: 2009-8-19 13:39

beadlock 先天設計係會玩到甩呔, 不過可以用膠水黏住佢
manju 發表於 2009-8-19 13:12

登錄/註冊後可看大圖

我條beadloc時晨仲味到

作者: edmondhk 時間: 2009-8-19 20:18
14,17,23mm有幾大分別同差係邊?

作者: alonso01 時間: 2009-8-20 10:07

beadlock 先天設計係會玩到甩呔, 不過可以用膠水黏住佢
manju 發表於 2009-8-19 01:12 PM

登錄/註冊後可看大圖

咁beadlock+膠水咪無敵組合?

作者: smalljohndoe 時間: 2009-8-20 10:11

14,17,23mm有幾大分別同差係邊?
edmondhk 發表於 2009-8-19 20:18

登錄/註冊後可看大圖

hmm 感覺上17mm 同23mm 好似穩陣d個 hex 冇咁易甩, 但我實際冇試過14mm 表現如何

作者: smalljohndoe 時間: 2009-8-20 10:14

咁beadlock+膠水咪無敵組合?
alonso01 發表於 2009-8-20 10:07

登錄/註冊後可看大圖

其實你可以用一隻叫UHU 既膠水, 去唔會痴死但又可以stick 住呔同鈴, 上埋鑼c應該冇問題
個鈴又可以再用返

作者: alonso01 時間: 2009-8-20 21:23

其實你可以用一隻叫UHU 既膠水, 去唔會痴死但又可以stick 住呔同鈴, 上埋鑼c應該冇問題
個鈴又可以再用返
smalljohndoe 發表於 2009-8-20 10:14 AM

登錄/註冊後可看大圖

嗰隻膠水係咪五金鋪/鴨記地鋪有售?因為我真係未聽過有呢隻膠水
定係RC專用?

作者: tatame 時間: 2009-8-20 21:30
文具店有售

登錄/註冊後可看大圖

作者: alonso01 時間: 2009-8-20 23:31

文具店有售

登錄/註冊後可看大圖

tatame 發表於 2009-8-20 09:30 PM

登錄/註冊後可看大圖

原來係呢隻膠水, 咁係咪好似正常痴呔程序咁痴呀?

作者: oscarchoi 時間: 2009-8-20 23:38
要二面都有膠水,但要留意一定要有少許干才接合,或者可買3m scotch 171 lstant Adhesive,用過包你 good

作者: alonso01 時間: 2009-8-20 23:53

要二面都有膠水,但要留意一定要有少許干才接合,或者可買3m scotch 171 lstant Adhesive,用過包你 good
oscarchoi 發表於 2009-8-20 11:38 PM

登錄/註冊後可看大圖

似乎UHU平好多喎

作者: oscarchoi 時間: 2009-8-21 00:04
鴨記約$23,用在超快車輪都無脫胎

作者: smalljohndoe 時間: 2009-8-21 07:48
不要用3M 171落去beadlock 到, 你買beadlock 其中一個原因係條鈴可以用返
171 即係超能膠, 用左條鈴好難重用
其實用uhu 落beadlock 冇咩技巧, 查係呔同鈴既接合面就ok, 都唔駛等少許干, 因為你有鑼c, uhu 只是輔助

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)