RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 請問有冇ching用過speedpassion電變同brushless motor? [打印本頁]

作者: mansiu    時間: 2009-9-28 03:17
標題: 請問有冇ching用過speedpassion電變同brushless motor?
若加到大E-revo效果如何?
作者: hardmankam    時間: 2009-9-28 10:59
本帖最後由 hardmankam 於 2009-9-28 11:01 編輯

Its better to buy Hobbywing 150A version.
150A version supports up to 6S Lipo

SpeedPassion = HW 80A (supports up to 4S Lipo)
作者: mansiu    時間: 2009-9-30 01:53
想問d BRUSHLESS MOTOR 3.5R,4.5 , 5.5 , 6.5 , 7.5 , 8.5有乜分別?
http://www.speedpassion.net/product.php?lang=&c=36
作者: swswsw    時間: 2009-9-30 12:48
motor not OK...I tried...
for serious play.. need either Losi, Mamba, or Neu (the best)...
作者: hardmankam    時間: 2009-9-30 13:24
motor not OK...I tried...
for serious play.. need either Losi, Mamba, or Neu (the best)...
swswsw 發表於 2009-9-30 12:48


swswsw c-hing,
you know where to buy Neu motors in hk?

i also heard medusa is also a good brand... but its out of business now.
作者: mansiu    時間: 2009-9-30 17:46
咁請問有咩勁既電變同無刷比大E-REVO(要有lipo cut)..thx
作者: hardmankam    時間: 2009-9-30 17:57
ESC -> Castle Mamba Monster Max (MMM), Tekin Rx8, HW 150A
Motor -> Neu, Medusa
作者: mansiu    時間: 2009-9-30 18:37
以上電變全部都有lipo cut?..thx
作者: hardmankam    時間: 2009-9-30 18:41
以上電變全部都有lipo cut?..thx
mansiu 發表於 2009-9-30 18:37


有lipo cut!
作者: mansiu    時間: 2009-9-30 23:11
大E-REVO無刷版本(mmm)的lipocut係幾多volt? thx
作者: hardmankam    時間: 2009-9-30 23:22
Lipo-cut can set at 3.6V , 3.4V, 3.2V, or 3.0V per cell. for HW 150A.
作者: mansiu    時間: 2009-9-30 23:42
本帖最後由 mansiu 於 2009-10-1 00:23 編輯

我意思係原裝跟Castle Creations Mamba Monster ESC Castle Creations Mamba Monster 2200KV Motor版本 既lipo cut 係幾多volt,唔係HW150A..THX
http://www.traxxas.com/products/ ... 8/trx_erevo5608.htm
仲有大e-revo 應用?kvmotor 同電變?
作者: hardmankam    時間: 2009-10-1 09:34
MMM -> programable Lipo Cut (any voltage set by computer connection)
http://www.castlecreations.com/products/mamba_monster.html
e-revo -> use 2200kv @ 5S or 6S Lipo
作者: mansiu    時間: 2009-10-1 10:29
thx c hing




歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/) Powered by Discuz! X3.2