RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: Schumacher CAT SX - finished! [打印本頁]

作者: henryb4sun 時間: 2009-10-31 11:47
標題: Schumacher CAT SX - finished!
Hello,

Share to you all. My Schumacher CAT SX finally finished. I think it looks nice with very high build quality. With such spec, I think the price is indeed not high.

Enjoy!

[attach]315292[/attach]
[attach]315293[/attach]
[attach]315294[/attach]
[attach]315295[/attach]
[attach]315296[/attach]
[attach]315297[/attach]
[attach]315298[/attach]
[attach]315299[/attach]
[attach]315300[/attach]

作者: andyQQ 時間: 2009-10-31 11:52
Looks very good, How much?

作者: platolau 時間: 2009-10-31 12:29

$$$$$$$$$$$$$$

作者: henryb4sun 時間: 2009-10-31 12:30
2# andyQQ

Basic car kit around HK3,4xx. This price already include all titanium turnbuckle and tyre. I added some hop ups like front/rear roll bar and aluminum shock stand mount which cost me another HK700.

A UK design car, that is reasonable!

作者: lcpvcce 時間: 2009-10-31 12:50
is it lipo ver. ??.....@~@.

作者: coke 時間: 2009-10-31 12:52
What servo do u use?

作者: orange00 時間: 2009-10-31 12:58
Where you bought it? HK or online?

作者: minimini 時間: 2009-10-31 13:38

Where you bought it? HK or online?
orange00 發表於 2009-10-31 12:58

登錄/註冊後可看大圖

available at Jet Hobby...........

作者: lamcwai 時間: 2009-10-31 13:55
Very nice thanks for share!!!!!

作者: hihizaza 時間: 2009-10-31 15:28
又想買車仔，各位認為買呢部定durango好呢？

作者: iouand 時間: 2009-10-31 21:42
我只想知直路會唔會快過直軸車.................
樓主你試完車後可否report一下
最後都係果句.....弓起弓起!!又有新車玩

作者: howaiho 時間: 2009-10-31 22:34

What servo do u use?
coke 發表於 2009-10-31 12:52

登錄/註冊後可看大圖

係savox,係食粥買多數,好似得佢有,我都買左隻2OKG鈦齒先4舊多D裝左落部flux到

作者: henryb4sun 時間: 2009-11-1 02:58
6# coke

I am using a taiwan servo called Savox. It seems quite quick!

作者: henryb4sun 時間: 2009-11-1 03:00
11# iouand

I am waiting the off road track in TRC to finish....haha...

作者: mlee 時間: 2009-12-8 22:16
Hello, I am building a Lipo version also. Do you have any tips to share? On step 11, there is something called "Moly" included in the bag. Do you know if it sell seprately? Thanks.

作者: kingman7788 時間: 2009-12-8 23:03
nice design, is it 1:10? $3400 kit seems quite expensive.....

作者: henryb4sun 時間: 2009-12-9 00:05
15# mlee

that is for the thrust bearing so you can use Associate black grease.

作者: mlee 時間: 2009-12-9 00:15
17# henryb4sun

Thanks Henry, but I find that the texture is a bit difference from Assoicated. It seems to be thicker...

作者: 黎小雞 時間: 2009-12-9 01:54
好車!買咗都唔捨得玩!

作者: henryb4sun 時間: 2009-12-9 02:11
18# mlee

Or you can use the TRF black grease. It will be thicker.
C hing, where you plan to play the CAT?

作者: mlee 時間: 2009-12-9 07:59
I am hopping to play the car on track, however I don't think there is any track in HK now.... I am still at step 13..hehe..Where do you play?

作者: mlee 時間: 2009-12-9 08:01
I am hopping to play the car on track, however I don't think there is any track in HK now.... I am still at step 13..hehe..Where do you play?

作者: rk2 時間: 2009-12-9 10:23
However, I still think the driving belt is too complicated. .. . ..

作者: ryancmlam 時間: 2009-12-9 22:28
what a nice car

作者: pp123nn 時間: 2009-12-10 02:00
nice car.不過好鬼貴.

作者: mlee 時間: 2009-12-10 02:32
This car is not expensive considering the materials used.
My db01 is not up to the standard of cat sx but cost me about the same if not more.... universal joints on all 4 wheels, slipper, carbon reinforced a-arms, optional mounting brackets, TRF shocks, screws, optional steering .......they all adds up

作者: henryb4sun 時間: 2009-12-11 22:57
26# mlee

mlee,

totally agree with you. If you need to reach such level of buggy, the price is not high. It is cheaper than a TRF 511 but with more options.

I haven't played yet as waiting TRC off road track complete (if it will)....haha...

作者: mlee 時間: 2009-12-23 22:11
Hi Henry,

I finally finished the car but I only using the existing 9t brushless combo. Standard gear with 26 teeth on the motor. I am looking for a good 6.5t combo... when I receive my double paid for this year.... any suggestions? I can feel the difference between cat and. DB01 already! And it is great! I only drive around the parking lot. LOL

作者: henryb4sun 時間: 2009-12-23 22:23
28# mlee

Hello Mlee,

I am using LRP X12 6.5R motor, with 21/80 and standard internal gear ratio. I also get the tire for on road playing.

Forget about the Tamiya. CAT is a piece of art. A full option DB01 will be more expensive than a CAT.

作者: mlee 時間: 2009-12-23 22:37
Thanks for your suggestions. I did put spacers with cat hex in order to use j concept wheels with new released Tamiya tires(part number did not get recorded but from cat shop). They are softer and "bite" the floor !

Haha, you said it...The CAT makes me leave my DB01 alone.

作者: mlee 時間: 2009-12-23 22:38
Thanks for your suggestions. I did put spacers with cat hex in order to use j concept wheels with new released Tamiya tires(part number did not get recorded but from cat shop). They are softer and "bite" the floor !

Haha, you said it...The CAT makes me leave my DB01 alone.

作者: henryb4sun 時間: 2009-12-23 22:45
31# mlee

This sounds interesting, can you post your CAT photo here? I am interested! haha...

I love the design of CAT SX! wow...

作者: hihizaza 時間: 2009-12-24 01:33
i bought the original cat wheel today,very expensive,$60 for two!!
i will try to use DB01 wheel but need to change the rear wheel pin to 1.6x10!!!
if sucess i will post the photo here!!!

作者: henryb4sun 時間: 2009-12-24 05:16
33# hihizaza

great! where you guys play it?

作者: ll2002 時間: 2009-12-24 10:21
看多兩眼會中毒身亡~~~~

作者: henryb4sun 時間: 2009-12-24 10:49
35# ll2002

haha....yes yes. that is quite poison ga!

作者: hihizaza 時間: 2009-12-24 10:55
say no to poison!!

作者: henryb4sun 時間: 2009-12-24 11:05
37# hihizaza

but say YES to CAT! haha

作者: hihizaza 時間: 2009-12-24 12:10
the rear alloy damper stand out of stock now,i buy the front one only!!

作者: henryb4sun 時間: 2009-12-24 12:17
39# hihizaza

I am still using the differential only. How's the front one way performance?

作者: hihizaza 時間: 2009-12-24 12:44
have not buy it ar,and i just install the servo only!!

作者: globe88 時間: 2009-12-24 12:49

作者: henryb4sun 時間: 2009-12-24 12:53
41# hihizaza

where will you play the CAT?

作者: hihizaza 時間: 2009-12-24 14:33
i play on street only!!

作者: mlee 時間: 2009-12-24 18:23
本帖最後由 mlee 於 2009-12-24 18:44 編輯

Hi All, here is my cat.... Very dry, no option, no special reinforced parts, no optional gears, only added a front Tamiya wing... Need to use larger rear wing.

登錄/註冊後可看大圖

Spacer on the hex in the front

登錄/註冊後可看大圖

Front Tamiya tyre

登錄/註冊後可看大圖

Rear Tamiya tyre

登錄/註冊後可看大圖

作者: hihizaza 時間: 2009-12-24 18:27
45# mlee

hi bro
no window??

作者: hihizaza 時間: 2009-12-24 18:28

Hi All, here is my cat

登錄/註冊後可看大圖

mlee 發表於 2009-12-24 18:23

登錄/註冊後可看大圖

what brand is the wheel??

作者: minimini 時間: 2009-12-24 18:40

what brand is the wheel??
hihizaza 發表於 2009-12-24 18:28

登錄/註冊後可看大圖

those are J-concept rims..........

you can get them in cat shop.........

作者: mlee 時間: 2009-12-24 18:47
47# hihizaza

Yes Sir. Forgot the window.... that made me buy another shell,

作者: mlee 時間: 2009-12-24 18:49
本帖最後由 mlee 於 2009-12-24 18:51 編輯

48# minimini

Ching Minimini,

You are right!!! That's where I got them from.. Preferred in white color instead. Tamiya tyres.... cheapy...
The paint job on your Cat SX is super nice!!! I wish I can do paint job like that...

作者: hihizaza 時間: 2009-12-24 22:27

47# hihizaza

Yes Sir. Forgot the window.... that made me buy another shell,
mlee 發表於 2009-12-24 18:47

登錄/註冊後可看大圖

how much for a new shell?i want to buy one more for spare!!

作者: mlee 時間: 2009-12-25 00:06
51# hihizaza

$305 for both top and bottom...

作者: hihizaza 時間: 2009-12-25 00:25
52# mlee

with sticker??

作者: mlee 時間: 2009-12-25 00:34
53# hihizaza

Yes Sir, sticker comes with top shell

作者: minimini 時間: 2009-12-25 00:45

51# hihizaza

$305 for both top and bottom...
mlee 發表於 2009-12-25 00:06

登錄/註冊後可看大圖

yes........hkd$305 for a set of top & bottom.........

the only description I can think of..........is "daytime robbery".........

作者: hihizaza 時間: 2009-12-25 00:50
55# minimini

agree,i buy a spur gear for cat,$98

作者: minimini 時間: 2009-12-25 01:12

55# minimini

agree,i buy a spur gear for cat,$98
hihizaza 發表於 2009-12-25 00:50

登錄/註冊後可看大圖

modern car's design...........but at vintage car's price.........

作者: henryb4sun 時間: 2009-12-25 01:35
57# minimini

Yes...spare parts price is too high....
So I tell myself....England car ma....

作者: minimini 時間: 2009-12-25 02:14

57# minimini

Yes...spare parts price is too high....
So I tell myself....England car ma....
henryb4sun 發表於 2009-12-25 01:35

登錄/註冊後可看大圖

that's the reason why this car can never be popular.........at least in HK.......

作者: henryb4sun 時間: 2009-12-25 12:33
59# minimini

let's play together then!

作者: mlee 時間: 2009-12-25 14:43
Due to the high cost of spare parts, I tried to get as much spare parts as I could when bought the car. Except the shell... Looking forward to play together!

作者: henryb4sun 時間: 2009-12-25 14:50
61# mlee

I think I need to buy a spare body also. Includes the wing?

作者: mlee 時間: 2009-12-25 15:02
Wing is extra, suggest to use a bigger size wing.

作者: henryb4sun 時間: 2009-12-25 15:58
63# mlee

Bigger wing...such as?

作者: hihizaza 時間: 2009-12-25 16:01

63# mlee

Bigger wing...such as?
henryb4sun 發表於 2009-12-25 15:58

登錄/註冊後可看大圖

use tamiya wing,large area and cheap!!!

作者: mlee 時間: 2009-12-26 03:18
B I N G O, b i n g o!!!

作者: eason 時間: 2009-12-27 11:51

47# hihizaza

Yes Sir. Forgot the window.... that made me buy another shell,
mlee 發表於 2009-12-24 18:47

登錄/註冊後可看大圖

this shell is good for hard-running

作者: mlee 時間: 2009-12-27 23:51
67# eason

The extra body I got was for display instead of as spare.

作者: rcray 時間: 2010-1-2 22:45
where did you play it? :-)

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)