RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 新車一問 [打印本頁]

作者: WallaceNg 時間: 2010-1-4 13:00
標題: 新車一問
最近新買左部awd，咩都未改
但係發現一個問題:
當離地時會見到有一個輪轉得無咁smooth
直頭差唔多停係到咁
折開睇過應該係萬向同啤令之間或車輪之間
請間係未換金屬啤令之前係咪正常？

作者: scalpel 時間: 2010-1-4 13:02
唔出奇，AWD既 bearings係好重要，特別係中軸同差速嗰四粒！

作者: WallaceNg 時間: 2010-1-4 13:29
但係呢個問題應該同中軸過兩粒無咩關系
我覺得miniz四個轆既friction差少少就好易睇得出，唔同大車

作者: scalpel 時間: 2010-1-4 13:43

但係呢個問題應該同中軸過兩粒無咩關系
我覺得miniz四個轆既friction差少少就好易睇得出，唔同大車
WallaceNg 發表於 2010-1-4 13:29

登錄/註冊後可看大圖

我意思係你快啲換金屬啤令呀！

作者: billy86che 時間: 2010-1-4 14:54
本帖最後由 billy86che 於 2010-1-4 16:41 編輯

最近新買左部awd，咩都未改
但係發現一個問題:
當離地時會見到有一個輪轉得無咁smooth
直頭差唔多停係到咁
折開睇過應該係萬向同啤令之間或車輪之間
請間係未換金屬啤令之前係咪正常？
WallaceNg 發表於 2010-1-4 13:00

登錄/註冊後可看大圖

If you haven't changed anything, does it mean you are still using 8 plastic bushings at the 4 wheels? Did you also lock 1 or more or the wheels because you overtighten the lock nut(s)?

作者: WallaceNg 時間: 2010-1-4 16:13
yes, im still using the plastic bushing, but i didnt lock the wheel too tight
cuz it still hv the same problem eventhough the wheel is out

作者: billy86che 時間: 2010-1-4 16:43
Then there might be some problems with the differential(s).

作者: scalpel 時間: 2010-1-4 16:49

Then there might be some problems with the differential(s).
billy86che 發表於 2010-1-4 16:43

登錄/註冊後可看大圖

Maybe some dirt or wear inside!

作者: WallaceNg 時間: 2010-1-5 01:22
i tried it also, the differential is all looking great. Clean and brand new

作者: billy86che 時間: 2010-1-5 11:30
本帖最後由 billy86che 於 2010-1-5 11:31 編輯

1. Are all the plastic bushings well installed? Did they come out a little bit?

2. Are you sure there is absolutely not option parts used?

3. Did you add a little grease into the differentials?

作者: WallaceNg 時間: 2010-1-5 15:01
1. yes. no
2. surely not, becuz just bought it brand new
3. not yet, but i exchanged the differential, it stills happen at the same place

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)