RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 請問呢盒野係ad band定係2.4?? [打印本頁]

作者: patricklam    時間: 2010-2-2 17:50
標題: 請問呢盒野係ad band定係2.4??

                               
登錄/註冊後可看大圖

邊度有得賣??大約幾錢??自己砌好似好過隱,thx
作者: scalpel    時間: 2010-2-2 17:56
I think this one is just the kit, no PCB inside!
作者: matthew0731    時間: 2010-2-2 17:56
2.4G
應該有8成係
2成唔係..有錯請插
作者: patricklam    時間: 2010-2-2 21:16
I think this one is just the kit, no PCB inside!
scalpel 發表於 2010-2-2 17:56

PCB=電路版??
我見盒野賣萬幾二萬yen,唔會唔包掛...
作者: checkie    時間: 2010-2-2 22:54
可以話你知係一定無~~~
作者: lam_po2    時間: 2010-2-3 00:22
100% without PCB~
作者: scalpel    時間: 2010-2-3 01:18
Thanks other ching prove it!
作者: patricklam    時間: 2010-2-3 09:51
可以話你知係一定無~~~
checkie 發表於 2010-2-2 22:54

100% without PCB~
lam_po2 發表於 2010-2-3 00:22

千幾蚊都冇電路版??另外買塊要幾錢?thx
作者: scalpel    時間: 2010-2-3 10:59
千幾蚊都冇電路版??另外買塊要幾錢?thx
patricklam 發表於 2010-2-3 09:51

This one is special edition......with Kyosho X speed motor and Ball diff......if you just buy the Ball diff. $290 each.......2.4G PCB about $510-550
作者: patricklam    時間: 2010-2-4 00:13
This one is special edition......with Kyosho X speed motor and Ball diff......if you just buy the Ball diff. $290 each.......2.4G PCB about $510-550
scalpel 發表於 2010-2-3 10:59

咁買呢盒野再買埋pcb都去左$$1500??
作者: scalpel    時間: 2010-2-4 00:43
咁買呢盒野再買埋pcb都去左$$1500??
patricklam 發表於 2010-2-4 00:13

You are right!
作者: WallaceNg    時間: 2010-2-4 02:01
and u need to buy remote also
作者: patricklam    時間: 2010-2-4 16:15
and u need to buy remote also
WallaceNg 發表於 2010-2-4 02:01

已有KT-18...




歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/) Powered by Discuz! X3.2