RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 我架mr03成日行幾步就打晒圈... [打印本頁]

作者: patricklam 時間: 2010-2-9 15:39
標題: 我架mr03成日行幾步就打晒圈...
我架mr03叉足電開車,一開行唔夠半個車位就係咁轉圈,好似"扇"軑咁,一係就以左前輪係咁左轉,一係就以右前輪係咁右轉,慢慢開就冇事,但個d枝枝聲就勁刺耳,再加上d齒輪位又成日吱吱聲,請問有咩辦法呢??反而倒後行就好點...

另外個摩打係開車煞車個陣都會閃一閃,會唔會有問題ga??thx

作者: pissa 時間: 2010-2-9 15:41
Did you modify any thing? Try to change the tie first. The sparking on the motor is normal.

作者: neth 時間: 2010-2-9 17:07
check 下兩面頭轆順唔順

作者: 168boy 時間: 2010-2-9 19:55
頭轆鑼C收得太緊

作者: damonlam 時間: 2010-2-10 13:26
1# patricklam

師兄你有冇set 過份i.c.s? 如果有, 可能係你set嘅punch太大, servo齒掃咗,

如果冇, 就可能係其他師兄所講, 車轆locknut太緊啦, btw, 你用緊牙叉定珠叉?

作者: stevenyu2000 時間: 2010-2-17 17:07
I have the same issue like this !
I am a new player and just bought a MR03 full original.
When accelerate the car , it is "係咁轉圈" . But no problem to run stright line by running very slow or in reserve direction !

作者: 2slow 時間: 2010-2-18 09:17

I have the same issue like this !
I am a new player and just bought a MR03 full original.
When accelerate the car , it is "係咁轉圈" . But no problem to run stright line by running very slow or in r ...
stevenyu2000 發表於 2010-2-17 17:07

登錄/註冊後可看大圖

First thing to do after you buy a brand new mini-z, Change the Tires~!
原裝呔好slippery的~

作者: stevenyu2000 時間: 2010-2-18 11:15

First thing to do after you buy a brand new mini-z, Change the Tires~!
原裝呔好slippery的~
2slow 發表於 2010-2-18 09:17

登錄/註冊後可看大圖

真係得wow , 昨晚去買左新軚, Atomic 前20後10有紋較, 可以大油D起步啦 , 不過全速行多Ｄ就會冼, 加GYRO得唔得, 有冇幫助呀?

作者: 2slow 時間: 2010-2-18 11:52

真係得wow , 昨晚去買左新軚, Atomic 前20後10有紋較, 可以大油D起步啦 , 不過全速行多Ｄ就會冼, 加GYRO得唔得, 有冇幫助呀?
stevenyu2000 發表於 2010-2-18 11:15

登錄/註冊後可看大圖

你係邊樹玩先? 改左全車bearing未?

作者: ellis 時間: 2010-2-18 13:32
其實冼唔冼, 除左同車呔有關外, 車仔既setting 同玩既地方都有莫有關連, 地板同地磚及入場玩既地毯已經有好大既差別, 所以要視乎閣下係自家屋企玩樂派定入場劈車派而去決定投資咩option 落架車仔度.

作者: stevenyu2000 時間: 2010-2-18 17:08

你係邊樹玩先? 改左全車bearing未?
2slow 發表於 2010-2-18 11:52

登錄/註冊後可看大圖

No modify for the car but only the tie.
I am now playing at home with 地磚 .

Just bought some options and try tomorrow.
Gyro Unit for MR03 , Atomic ball bearing , Atomic Front spring set ( soft ) , PN carbon T-Plate

作者: 2slow 時間: 2010-2-18 17:27
咁快買咁多options...

but If don't play on tracks, you won't feel much difference with those options

作者: magiceye 時間: 2010-2-18 23:55

No modify for the car but only the tie.
I am now playing at home with 地磚 .

Just bought some options and try tomorrow.
Gyro Unit for MR03 , Atomic ball bearing , Atomic Front spring set ( so ...
stevenyu2000 發表於 2010-2-18 17:08

登錄/註冊後可看大圖

我初初玩都有同一樣嘅問題, 係屋企磚地根本冇機會發揮架車嘅正常表現, 用option 20/10度呔仲衰, 跑兩吓就已經黏滿塵, 唔咬地係咁打白鴿轉, 就算係公司嘅地毯玩都唔醒, 只有係車場嘅地毯至最掂. 有心set車就一定要落場, 如果諗住係屋企玩就乜都唔好換, 只練手指控制油門算吧.

作者: stevenyu2000 時間: 2010-2-19 10:20
我用 20/10 有紋呔真係好左 , 黏滿塵問題可以用膠紙黏走.

作者: ellis 時間: 2010-2-20 14:24

我初初玩都有同一樣嘅問題, 係屋企磚地根本冇機會發揮架車嘅正常表現, 用option 20/10度呔仲衰, 跑兩吓就已經黏滿塵, 唔咬地係咁打白鴿轉, 就算係公司嘅地毯玩都唔醒, 只有係車場嘅 ...
magiceye 發表於 2010-2-18 23:55

登錄/註冊後可看大圖

或者係屋企磚地or 木地板玩之前用水拖一拖塊地, 乾後會無咁多塵同咬地d, 因為我試過~

作者: 反擊天使sky 時間: 2010-2-20 14:55
睇文中~~~~~

作者: stevenyu2000 時間: 2010-2-20 14:59
拖地玩好wow,對屋企又好,自己又有得玩

作者: matthew0731 時間: 2010-2-20 17:16
屋企地板玩
我呔都唔買
買左=晒料
用返4條KYOSHO原裝呔都夠用
小弟只有玩AWD

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)