RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 完成了 - Sand Scorcher [打印本頁]

作者: jpmontoya2 時間: 2010-2-11 23:07
標題: 完成了 - Sand Scorcher
本帖最後由 jpmontoya2 於 2010-4-8 23:20 編輯

開始砌啦!!因為天氣關系....未可上色住

先做波箱

登錄/註冊後可看大圖

裝上 A -arm

登錄/註冊後可看大圖

上摩打

登錄/註冊後可看大圖

另一邊

登錄/註冊後可看大圖

Roll Cage .....

登錄/註冊後可看大圖

頭擔....

登錄/註冊後可看大圖

車架成形了

登錄/註冊後可看大圖

防水電子箱

登錄/註冊後可看大圖

天氣凍了......開住抽濕機.....開始上畢地.....

登錄/註冊後可看大圖

甜甜圈制作中

登錄/註冊後可看大圖

四個一包

登錄/註冊後可看大圖

底盤大致完成了

登錄/註冊後可看大圖

車殼上色中

登錄/註冊後可看大圖

車殼大致finish.....好難mask......有D位要即時作出補救

登錄/註冊後可看大圖

Lego man say HELLO~~

登錄/註冊後可看大圖

Body算係搞掂了....Job Done.
個原裝bumper太樣衰.....既然這車係display item...所以我覺得無乜所謂..
只欠人仔&車頭指揮燈............由於人仔上色係小弟弱項...所以己交由專人代勞~~~~

登錄/註冊後可看大圖

買左對新鞋....多左D古典味~~~~

登錄/註冊後可看大圖

完成....多謝RCman兄為車手上色點睛!!

登錄/註冊後可看大圖

作者: js 時間: 2010-2-11 23:13
本帖最後由 js 於 2010-2-11 23:18 編輯

嘩 ! ching 你的相靚到好似孖星自己出的宣傳相咁.

作者: liallanhk 時間: 2010-2-11 23:16
我都覺得系呀!佢啲相真系好靚!

作者: bigbigboy 時間: 2010-2-11 23:27
Waiting for your shell finishing。

作者: mrpanda 時間: 2010-2-11 23:33
師兄
噴上什麼色呢!!

作者: ilove-benz 時間: 2010-2-11 23:40
本帖最後由 ilove-benz 於 2010-2-11 23:42 編輯

師兄,我建議你那些六角杯頭螺絲去配不銹鋼果D裝

作者: jpmontoya2 時間: 2010-2-11 23:42

師兄
噴上什麼色呢!!
mrpanda 發表於 2010-2-11 23:33

登錄/註冊後可看大圖

原色~~~~

作者: albertau2011 時間: 2010-2-11 23:50
me too, ..............30 years ago

作者: hihizaza 時間: 2010-2-12 00:01

師兄,我建議你那些六角杯頭螺絲去配不銹鋼果D裝
ilove-benz 發表於 2010-2-11 23:40

登錄/註冊後可看大圖

呢架原汁原味靚啲喎!!!

作者: rabbitmomo 時間: 2010-2-12 01:30
樓主你呢個POST會另到好多人走去買SAND SCORCHER,孖星真係要多謝你~

作者: next11888 時間: 2010-2-12 02:55
11# C仔

去買啦!我地一齊飛呀?

作者: rabbitmomo 時間: 2010-2-12 02:59

我都心思思緊，包裝好靚
C仔發表於 2010-2-12 02:27

登錄/註冊後可看大圖

對我唻講無情意結,只不過覺得好佢靚,想拎唻DISPLAY同埋行下街咁~所以我唔買LU

作者: jpmontoya2 時間: 2010-2-13 01:53
本帖最後由 jpmontoya2 於 2010-2-16 00:27 編輯

一樓己更新

作者: ilove-benz 時間: 2010-2-13 02:14
good job!

作者: 1524 時間: 2010-2-13 02:38
14# jpmontoya2

樓主底灰係用星星surface primer 1000??

作者: jas 時間: 2010-2-13 22:02
How did you paint the tire letters?

作者: jpmontoya2 時間: 2010-2-13 22:30

14# jpmontoya2

樓主底灰係用星星surface primer 1000??
1524 發表於 2010-2-13 02:38

登錄/註冊後可看大圖

Yes....White color Putty from Tamiya~~

作者: jpmontoya2 時間: 2010-2-13 22:30

How did you paint the tire letters?
jas 發表於 2010-2-13 22:02

登錄/註冊後可看大圖

by brush only...:-)

作者: liallanhk 時間: 2010-2-13 22:35
呀!D字咁都比你油到!你就好啦......又無手震,又無老花!

作者: jpmontoya2 時間: 2010-2-13 23:02
本帖最後由 jpmontoya2 於 2010-2-16 00:29 編輯

一樓己更新

作者: 1524 時間: 2010-2-13 23:20

Yes....White color Putty from Tamiya~~
jpmontoya2 發表於 2010-2-13 22:30

登錄/註冊後可看大圖

ching, 想請教o下,
如果噴硬殼, 用surface primer 500做底,
會唔會太粗?

作者: jpmontoya2 時間: 2010-2-13 23:35

ching, 想請教o下,
如果噴硬殼, 用surface primer 500做底,
會唔會太粗?
1524 發表於 2010-2-13 23:20

登錄/註冊後可看大圖

我Putty用開Tamiya 的......但我估Mr. Color 的1000都OK....500就噴新殼好似有D rough...!?

作者: 1524 時間: 2010-2-13 23:44
我都怕會粗過頭...要打磨先ok.
maybe都係買枝1000會穩陣 d...

作者: 1524 時間: 2010-2-13 23:45
你上完1000後,
會直接上面油, 定係會用水磨沙紙打番滑 d 先再上面油?

作者: jpmontoya2 時間: 2010-2-14 13:24

你上完1000後,
會直接上面油, 定係會用水磨沙紙打番滑 d 先再上面油?
1524 發表於 2010-2-13 23:45

登錄/註冊後可看大圖

太懶

無做....直上

作者: jpmontoya2 時間: 2010-2-14 13:26
本帖最後由 jpmontoya2 於 2010-2-16 00:29 編輯

一樓己更新

作者: jas 時間: 2010-2-14 14:27
Does the rear roll cage fit okay? Some kits have the rear roll cage's hole mis-drilled.

作者: jas 時間: 2010-2-14 14:31
Btw, 有問題既rear roll cage有無得換?

作者: jpmontoya2 時間: 2010-2-14 14:38

Does the rear roll cage fit okay? Some kits have the rear roll cage's hole mis-drilled.
jas 發表於 2010-2-14 14:27

登錄/註冊後可看大圖

HAHA..my one was from WAI Go...i have heard the parts was stuffed for other kit..

for the kit from WAI GO...they waited for the replacement part from Tamiya before giving to customer..so my one is perfectly fitted!

作者: barrypops 時間: 2010-2-14 18:45

HAHA..my one was from WAI Go...i have heard the parts was stuffed for other kit..

for the kit from WAI GO...they waited for the replacement part from Tamiya before giving to customer..so my one ...
jpmontoya2 發表於 2010-2-14 14:38

登錄/註冊後可看大圖

Would you kindly let me know ...what did you mention"the rear roll cage " ?
Is it the black one ?
Thanks !

作者: jpmontoya2 時間: 2010-2-14 19:15

Would you kindly let me know ...what did you mention"the rear roll cage " ?
Is it the black one ?
Thanks !
barrypops 發表於 2010-2-14 18:45

登錄/註冊後可看大圖

hi Barry..

I have only heard this from a friend of mine.......

The reason for the delay of the Sand Scorcher was because of a part was mis drilled with 0.5mm tolerance...so wait for Tamiya to release the item.....

They said its something at the rear...but the member above mentioned its the roll cage...so i think its about that area....

Its the black part that protects the motor from the rear collision..hope it helps!

作者: barrypops 時間: 2010-2-14 20:17

hi Barry..

I have only heard this from a friend of mine.......

The reason for the delay of the Sand Scorcher was because of a part was mis drilled with 0.5mm tolerance...so wait for Tamiya t ...
jpmontoya2 發表於 2010-2-14 19:15

登錄/註冊後可看大圖

Thankyou so much !

作者: s0301399 時間: 2010-2-14 21:21
樓主：你的照片達專業水平！可否賜教如何拍攝，需要甚麼器材呢？

作者: 007 時間: 2010-2-14 23:11
Must say that your photos are very pro. Thanks for sharing them with us.

BTW, did you spray the blue colour first or white colour first? Any advice on painting the body to help us? Thanks.

作者: jpmontoya2 時間: 2010-2-15 02:34

樓主：你的照片達專業水平！可否賜教如何拍攝，需要甚麼器材呢？
s0301399 發表於 2010-2-14 21:21

登錄/註冊後可看大圖

不敢賜教......小弟攝影還是名初哥....

其實只要光源充足....就大致可影出上面那些照片...

當然...要再好一點就可以用些更專業的攝影器材.....

就上面既照片來說....我用了一台DSLR.....加外閃....加微距鏡頭一支...

做法: 先張一張A2 size既黑卡紙做背景....把外閃向天花打....令光源從天花反射到物體上....檢查正確白平衡....按下快門就ok了

作者: jpmontoya2 時間: 2010-2-15 02:41

Must say that your photos are very pro. Thanks for sharing them with us.

BTW, did you spray the blue colour first or white colour first? Any advice on painting the body to help us? Thanks.
007 發表於 2010-2-14 23:11

登錄/註冊後可看大圖

I am no expert in painting...so i can only tell u what i did...hahaha

Painting steps:
1. Spray Tamiya Putty (white) <--the reason for choosing the white one was because the basic color was a rather light one....and the plastic are also in white...so white putty is enough

2. Spray the TS 26 (Racing White) color...
3. Mask the area where it should be white...(i.e. leaving the light blue area exposed)
4. Spray the Light blue..
5. Spray Clear Coat
6. Optional: u can use polisher to polish the top layer to enhance the shinny effect
7. Apply stickers...

作者: jpmontoya2 時間: 2010-2-15 02:54
本帖最後由 jpmontoya2 於 2010-2-16 00:30 編輯

一樓己更新

作者: barrypops 時間: 2010-2-15 08:06
Stunning paint job

作者: 007 時間: 2010-2-15 12:04
Wah, so pretty. Really want to use it as my wall paper. Thanks for the painting tips.

作者: ilove-benz 時間: 2010-2-15 13:56
ching, 想請教o下,
你噴殼, 用噴油定噴筆?
用幾多號?
先藍色之後白色?

作者: jpmontoya2 時間: 2010-2-15 23:34

ching, 想請教o下,
你噴殼, 用噴油定噴筆?
用幾多號?
先藍色之後白色?
ilove-benz 發表於 2010-2-15 13:56

登錄/註冊後可看大圖

我用噴罐..

你無砌過Tamiya的模型?說明書有講....跟佢就OK...

我先噴白...再藍

作者: jpmontoya2 時間: 2010-2-16 00:22
本帖最後由 jpmontoya2 於 2010-2-16 00:35 編輯

一樓己更新...
仲差人仔&指揮燈

登錄/註冊後可看大圖

作者: liallanhk 時間: 2010-2-16 12:44
真系好靚!好靚!

作者: RCman 時間: 2010-2-16 17:49
好快bo

作者: chichihaha 時間: 2010-2-16 22:51
good job good looking ar

作者: jpmontoya2 時間: 2010-2-17 00:54
Thank you all brothers~~~~~

作者: move7648 時間: 2010-2-18 23:18

一樓己更新...
仲差人仔&指揮燈

登錄/註冊後可看大圖

jpmontoya2 發表於 2010-2-16 12:22 AM

登錄/註冊後可看大圖

仲未見人仔同指揮燈?
好心急想睇下呀!

作者: josephlkcheung 時間: 2010-2-26 10:14
超正,好手工, 讚不絕口

作者: wildbruiser 時間: 2010-2-26 13:12

hi Barry..

I have only heard this from a friend of mine.......

The reason for the delay of the Sand Scorcher was because of a part was mis drilled with 0.5mm tolerance...so wait for Tamiya t ...
jpmontoya2 發表於 2010-2-14 19:15

登錄/註冊後可看大圖

Really great!!

BTW, would it be good to spray clear coat over the stickers so that the stickers can also be protected.

作者: 4wdman 時間: 2010-2-26 14:55

ching.正到咁!真係比你毒死!

作者: jpmontoya2 時間: 2010-2-26 21:50

Really great!!

BTW, would it be good to spray clear coat over the stickers so that the stickers can also be protected.
wildbruiser 發表於 2010-2-26 13:12

登錄/註冊後可看大圖

I also thught about it...i am not sure about the material of the sticker..and fear the clear cost may eventually destroy the stickers...so i did not do it.

作者: jpmontoya2 時間: 2010-2-27 02:20
Got news from other forum that they have a Sand Scorcher and Buggy Champ built contest....

http://www.tamiyausa.com/articles/feature.php?article-id=463

作者: jpmontoya2 時間: 2010-3-3 20:25
Updated in #1

買左對新鞋....多左D古典味~~~~

登錄/註冊後可看大圖

作者: osmond 時間: 2010-3-4 02:19
好靚呀！

請問對鞋邊到買家？

作者: jpmontoya2 時間: 2010-3-4 09:55

好靚呀！
請問對鞋邊到買家？
osmond 發表於 2010-3-4 02:19

登錄/註冊後可看大圖

Ebay is your friend...:-)

作者: aattaa 時間: 2010-3-4 11:01

Updated in #1

買左對新鞋....多左D古典味~~~~

登錄/註冊後可看大圖

jpmontoya2 發表於 2010-3-3 20:25

登錄/註冊後可看大圖

好靚呀......

作者: jpmontoya2 時間: 2010-4-8 23:21
updated #1

車手由RCman上色...THANKS

登錄/註冊後可看大圖

作者: stig 時間: 2010-4-10 05:55
i need to get one of this! anymore stock in hk?

作者: gibson 時間: 2010-4-10 11:54

i need to get one of this! anymore stock in hk?
stig 發表於 2010-4-10 05:55

登錄/註冊後可看大圖

A lot of stock in HK!!

作者: Mobility(雲) 時間: 2010-6-17 11:40
Hey man, you spent time and over 2000HKD on this RC.
why you did not sand those moulding line to make it prefect?.....

作者: kei777 時間: 2010-6-18 16:13
本帖最後由 kei777 於 2010-6-18 16:16 編輯

登錄/註冊後可看大圖

架野搞到好頂癮添!!

登錄/註冊後可看大圖

D90影d相加ching既技術!!堅呀

作者: kei777 時間: 2010-6-19 13:02

登錄/註冊後可看大圖

就嚟忍唔住喇!!

作者: jpmontoya2 時間: 2010-6-19 16:24

Hey man, you spent time and over 2000HKD on this RC.
why you did not sand those moulding line to ma ...
Mobility(雲) 發表於 2010-6-17 11:40

登錄/註冊後可看大圖

Initially..the shell was planned for a rough run....but then..it turn out OK..s i take it for a display...dont worr.y.i still got another NIB body..can always paint another one when i feel like it...:-P

作者: jpmontoya2 時間: 2010-6-19 16:25

架野搞到好頂癮添!! D90影d相加ching既技術!!堅呀
kei777 發表於 2010-6-18 16:13

登錄/註冊後可看大圖

.....have u already bought it? GO GO GO !

作者: booby 時間: 2010-6-19 22:18
EXCELLENT!!

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)