RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: Li-po Battery Question [打印本頁]

作者: st_kuen 時間: 2010-3-8 16:41
標題: Li-po Battery Question
Is the 'Power' of the battery only determine by the 'C' value and independent of the 'mah' value of the battery?

For example, 25c 3600mah battery should has same Power as 25c 5000mah battery. The only different is that the 25c 5000mah battery has a higher storage capacity and can play for longer time.

Thank in advance!

作者: rk2 時間: 2010-3-8 16:58
本帖最後由 rk2 於 2010-3-8 16:59 編輯

mAH 是容量. c 是最大放電量. 自己計下數就明了. . . ..

作者: st_kuen 時間: 2010-3-8 17:29
Is the output Power = C x mAH ?
Then both factors will affect the power of the battery.

作者: hardmankam 時間: 2010-3-8 18:17
C = Max discharge rate
mAh = Capacity

Max Amp = C x mAh / 1000
eg: 5000mAh @ 40C => 40 x 5000 / 1000 = 40 x 5 = 200A

Power = Current x Voltage
so Power = 200A x 7.4v = 1480Watts
(please note that will be a voltage drop at very high current, so 7.4V is just an assumption.)

so mAh and C will affect power output.

作者: st_kuen 時間: 2010-3-8 21:57
Thanks! Hardmankam c-hing,

Very very clear and detail explanation.

作者: pma 時間: 2010-3-30 17:42
Thank you for sharing

作者: pskyng 時間: 2010-3-30 21:53

C = Max discharge rate
mAh = Capacity

Max Amp = C x mAh / 1000
eg: 5000mAh @ 40C => 40 x 5000 / ...
hardmankam 發表於 2010-3-8 18:17

登錄/註冊後可看大圖

thanks . its useful

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)