RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: li-po差機一問 [打印本頁]

作者: kurapikt    時間: 2010-4-11 01:03
標題: li-po差機一問
想問下咁多話師兄, 好過B6既lipo差機有乜選擇, 600以內
謝各師兄
作者: angelo2046    時間: 2010-4-11 01:39
I used x-charger b6 and now upgraded to hyperion 0720i. Highly recommend hyperion!!!
I just think cheap cheap charger is a waste of $ and more importantly, TIME.
My B6 never charge Ni-MH properly since I bought it (always say SHORT), thus I never tried it with LiPo. Then I have to use my old TLP charger...
I returned to the shop for repair, and I saw many ppl return it for repair. Obviously it has quality issue. I guess it's the same as extreme charger. The UI design / circuit of these cheap charger may be the same as others higher-end, yet the QC is a big big factor.
If you're on a budget, I suggest hyperion 0606i.
You may say it is 2x the price of B6, but if you really play RC, you can easily spend that extra $400 or so in other things. A good charger gives you peace of mind.
作者: kurapikt    時間: 2010-4-11 02:17
何謂好?
如果好指快, B8, 甚至B610A都會好過B6
如果指準, Hyperion 果D會準D, 價錢同樣貴D
Caoyi 發表於 2010-4-11 01:15


我指係準


I used x-charger b6 and now upgraded to hyperion 0720i. Highly recommend hyperion!!!
I just think  ...
angelo2046 發表於 2010-4-11 01:39



    咁...即係幾錢到
作者: paulo    時間: 2010-4-12 20:07
我都係新 touch  li-po , 所以都好想知個價大約是否 6xx OR 7xx , 同可否比幅玉照睇吓, 因好耐無去 kws 睇過, 想知多啲 , thx!
作者: hairy    時間: 2010-4-14 10:20
IUSE Hyperion ARE LONG TIME IS STABLE FOR (LI -PO)
作者: paulo    時間: 2010-4-14 10:25
有冇相睇呀 Thx!
作者: kurapikt    時間: 2010-4-14 11:50
BTW, 最後都係買左HYPERION 呢隻, 不過都係要火牛http://www.hyperion-world.com/products/product/HP-EOS0606i
作者: paulo    時間: 2010-4-14 12:56
Thx information. 但請問有冇個 mode for battery storage ? Thx!
作者: kurapikt    時間: 2010-4-14 14:22
yes, it got store mode
作者: paulo    時間: 2010-4-14 16:53
咁係咪是旦一部都有定某一個 model 至有呀?  Thx very much !
作者: kurapikt    時間: 2010-4-14 17:43
http://www.hyperion-world.com/products
請善用internet
作者: paulo    時間: 2010-4-14 22:02
Many many thx !
作者: hairy    時間: 2010-4-15 00:51
睇多D 學多D.....




歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/) Powered by Discuz! X3.2