RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: LiPO for Slash 4x4 [打印本頁]

作者: gimsink 時間: 2010-4-29 10:29
標題: LiPO for Slash 4x4
ching pls help :

1/. Can 5000mah 3S LiPo fit the original battery tray ( I mean height ) ? If not, is there any option post that can extend the height allowrance ?

2/. The original ESC can set LiPO lowcut, but the manaul did not said how to set the cut-off voltage, is it automatic detect 2S and 3S ?

作者: tatame 時間: 2010-4-29 11:04
1. FOR 3 CELL LIPO NEED TO PURCHASE trx BATTERY HOLD DOWN PACK
http://www.rcmart.com/catalog/rc ... ?cPath=595_739_1354

2. THE MANUAL CONTAIN INSTRUCTION ! SEEMS CANN'T CONFIG THE SPECIFIC CUT-OFF VOLTAGE !

作者: chacha 時間: 2010-4-29 11:06
本帖最後由 chacha 於 2010-4-29 11:21 編輯

1. Traxxas Slash Battery Tray Expansion Kit #5827X -- Hold down, battery/ hold down retainer/ battery post/ foam spacer/ angled body clip (allows for installation of taller, multicell
batteries)
This extended battery hold down for the Slash or Slash 4x4 allows for lipo packs of up to 42mm tall to fit in the stock tray. You will now be able to drop in a MaxAmps 13,500XL 7.4V pack when using this product. You can even fit our 9000XL 11.1V pack in for those of you that have converted your Slash over to brushless.

2. VXL-3s Battery Settings (Low-Voltage Detection Setting) example Slash Model 6808 Owner Manual p.16

作者: gimsink 時間: 2010-4-29 15:19
A nor....thankyou tatame-san and chacha-san !!

作者: gimsink 時間: 2010-4-29 15:29
chacha-san
May be you mis-understand my meaning, I know that we can enable the LiPO cut-off function of the ESC, but the manual does not mention I can set the cut-off voltage, becasue 2S and 3S LiPO cut-off voltage is not the same. Can the ESC detect 2S and 3S and auto setting the cut-off voltage itself ??

作者: chacha 時間: 2010-4-30 14:27
ESC can set LiPO lowcut, but automatic detect 2S/3S.

作者: gimsink 時間: 2010-4-30 16:33
That's what I want to confirm ---- auto detect 2s/3s cutoff voltage, thanks ching.

作者: Marco明 時間: 2010-4-30 16:45

That's what I want to confirm ---- auto detect 2s/3s cutoff voltage, thanks ching.
gimsink 發表於 2010-4-30 16:33

登錄/註冊後可看大圖

我覺得唔準.........試過幾次cut完返黎度得3.0v
都係自己計時最好

作者: gimsink 時間: 2010-4-30 22:33
ching, will it damage the battery if cut @ 3V/cell ?

作者: Marco明 時間: 2010-4-30 22:44

ching, will it damage the battery if cut @ 3V/cell ?
gimsink 發表於 2010-4-30 22:33

登錄/註冊後可看大圖

正常應該係會.....因為要3.7v先正常.....回盡都係得3.5v左右

作者: gimsink 時間: 2010-5-2 10:49
Marco ching, my last question want to lask you. If it low-cut @3V, can I storage charge it back to 3.8V immedaite after playing to prevent damage. I don't want to change the original ESC, it is waterproof....

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)