標題: Need advice for Xray X10 link [打印本頁] 作者: aihan 時間: 2010-5-3 14:55 標題: Need advice for Xray X10 link C hing pls advise gearing for X10,
I have 9T and 10.5T motor which spur gear you recommend for driving in PYC.
Also need advise for setting.
Thanks!作者: hardmankam 時間: 2010-5-4 10:32
Are u running 1S or 2S lipo?作者: aihan 時間: 2010-5-4 11:32
Running 2S lipo作者: hardmankam 時間: 2010-5-4 13:27
2S + 10.5 on a 1/10 pan car is super fast!
what is the diameter of the rear tire?作者: hardmankam 時間: 2010-5-5 10:33
Assuming you have 60mm rear tires, you can try 27/100 and have a rollout of 50mm/rev.
check your motor temp after 2 minutes. if the motor is not too hot, then you can gear taller. if too hot, gear shorter.作者: aihan 時間: 2010-5-14 12:13
Thanks for the advise brother.