RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 叉电問題 未解决 [打印本頁]

作者: vrally582    時間: 2006-7-24 02:56
標題: 叉电問題 未解决
点解我D NiMh 电叉完之後放落去,架車好以无力,好似无乜电咁,用meter check voltage 又好正常,点解呢?
点解决?
作者: 雷公    時間: 2006-7-24 03:08
原帖由 vrally582 於 2006-7-24 02:56 發表
点解我D NiMh 电叉完之後放落去,架車好以无力,好似无乜电咁,用meter check voltage 又好正常,点解呢?
点解决?

first question, how old are the batteries?
用meter check voltage 又好正常,点解呢?

this is normal. however, as soon as you put a load on the batteries, there will be a voltage drop....for dead batteries, the voltage drop will be so significant that the motor will not receive enough power.
作者: vrally582    時間: 2006-7-24 03:45
more than 1  year. but not often use it. so how to cure it ?
作者: vrally582    時間: 2006-7-24 03:51
Even i use it for the D cam and  the radio for  tamiya 1/10 car. They both show low battery   
The battery is dead? If yes, how to avoid this happen again?
作者: 雷公    時間: 2006-7-24 04:30
in that case it's either your batteries or your battery charger dead....




歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/) Powered by Discuz! X3.2