RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: revo 3.3 with jconsepts wheel [打印本頁]

作者: rc-truck 時間: 2010-5-15 16:03
標題: revo 3.3 with jconsepts wheel
本帖最後由 rc-truck 於 2010-5-15 16:04 編輯

登錄/註冊後可看大圖

作者: rotarygod 時間: 2010-5-15 16:39
呢種轆正呀!! 好過原裝嗰個.... 行平路轉彎冇咁易反車添呀

作者: hu2437 時間: 2010-5-15 19:44
嘩好型仔喎,好襯喎!

作者: ford 時間: 2010-5-16 02:20
nice wheel how muh it is ?

作者: colorswan 時間: 2010-5-16 08:23
呢架野外型好猛....套呔鈴正到暈...套尾翼係咪原裝架

作者: jeffip97 時間: 2010-5-16 08:38

呢架野外型好猛....套呔鈴正到暈...套尾翼係咪原裝架
colorswan 發表於 2010-5-16 08:23

登錄/註冊後可看大圖

For E-REVO, THERE IS A WING, for REVo 3.3 they dont have... you can buy it your self

作者: rc-truck 時間: 2010-5-17 11:55

nice wheel how muh it is ?
ford 發表於 2010-5-16 02:20

登錄/註冊後可看大圖

300 hkd

作者: ford 時間: 2010-5-18 02:11

300 hkd
rc-truck 發表於 2010-5-17 11:55

登錄/註冊後可看大圖

good price and how about the offset gain?or just the same of traxxas revo 3.3?

作者: rc-truck 時間: 2010-5-18 02:44
本帖最後由 rc-truck 於 2010-5-18 02:47 編輯

1 inches wider than the stocker totally . half inch wider than 3.3 on each side

作者: mansiu 時間: 2010-5-18 02:48
呢套jconsepts wheel kws有冇得賣?
放係大e-revo都應該幾型下

作者: rc-truck 時間: 2010-5-18 02:51
呢套jconsepts wheel kws應該冇得賣

作者: 太古少 時間: 2010-5-18 13:15
回復 11# rc-truck

應該系邊度買啊！D 17mm鈴好少見啊！

作者: rc-truck 時間: 2010-5-18 14:30
http://www.rcplanet.com/JConcepts_Tires_p/jci3308y.htm

it cost 130 hkd

作者: X2CRT 時間: 2010-5-19 13:54
Use standard size truggy tyres??

作者: rc-truck 時間: 2010-5-19 15:15
yes, standard truggy size fit these wheel

作者: jeffip97 時間: 2010-5-19 16:41
NO the shipping is $240

plus the wheels=$400

作者: D@sky 時間: 2010-5-19 17:03
哩套好似係jconcepts 3303? rcmart 有貨wor

作者: rc-truck 時間: 2010-5-19 19:59
3308Y......

作者: kspleung 時間: 2010-5-26 09:16
great buggy congratulations

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)