RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: Battery Probelm [打印本頁]

作者: hkbananaking 時間: 2010-5-28 10:45
標題: Battery Probelm
I have a set of RC car long time no play, I try to charge the lipo battery....and the charger show low voltage....seems cannot charge it ...is it the battery is dead and finish?

: 登錄/註冊後可看大圖

作者: hkbananaking 時間: 2010-5-28 10:55

未插平行線
vayeate 發表於 2010-5-28 10:49

登錄/註冊後可看大圖

I long time no use...may be I plug it to the wrong hole.... so this lipo battery is able to charge again right?

作者: milkboy 時間: 2010-5-28 11:30
用nicd or nimh 個 mode 差返起舊電先喇~~
up to 3.7 - 3.9v as you like
之後先用返 lipo 個 mode 再差喇~~
應該差到嫁喇~~

作者: hkbananaking 時間: 2010-5-28 11:43

用nicd or nimh 個 mode 差返起舊電先喇~~
up to 3.7 - 3.9v as you like
之後先用返 lipo 個 mode 再差喇 ...
milkboy 發表於 2010-5-28 11:30

登錄/註冊後可看大圖

thanks ! so I use 3.7-3.9V charge...use what A is safe to charge? if I charge like this...you suggest me charge how many minutes?

作者: milkboy 時間: 2010-5-28 23:57
本帖最後由 milkboy 於 2010-5-28 23:59 編輯

Use 1-2C to charge it by using nicd or nimh mode. Keep an eye on it until it reach 3,7-3.9V. Then you can charge it with normal lipo mode.
^^v

作者: RCMan_2006 時間: 2010-6-1 16:42

Use 1-2C to charge it by using nicd or nimh mode. Keep an eye on it until it reach 3,7-3.9V. Then ...
milkboy 發表於 2010-5-28 23:57

登錄/註冊後可看大圖

good idea !

作者: RCMan_2006 時間: 2010-6-1 16:44

未插平行線
vayeate 發表於 2010-5-28 10:49

登錄/註冊後可看大圖

冇話一定要插平行線叉 !

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)